Hi All
I had a problem with my TyTN II camera it was showing horizontal and vertical lines. So i sent it for repair and they replaced the camera.
It looks like they have reflashed my device to a different boot loader and changed the CID to a HTC test device. This is a full production release device that I bought from Expansys UK
Once I noticed a problem when I tried installing TomTom from the CD. It gave me an error. "Unable to install application. Please update your device ROM to the required version before trying again." I checked Model No in Device Information > Identity and it shows "Kaiser" I am not too sure but I thought this was KAIS130 before I sent it for repair, can someone confirm what it shows on your TyTN II.
I then tried to flash the HTC WWE shipped ROM and it gave me invalid vender ID.
Went in to bootloader and noticed at the top of the screen it shows "Security Unlocked" see attached image I have never seen this before what does this mean.
mtty commands shows.
info 2
HTCSTEST1234 ‹q:HTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1300TS13HTCE
Cmd>
What does this security unlocked mean?
Will bootloader which is security unlocked be any use to the ROM cookers on here?
Should I complain and send the unit back to get reflased?
Just Flash HardSPL which can be found in the sticky's in Kaiser Uprading and your good to flash any rom you like!
That is what i was planning to do use HardSPL.
But will this mean i will not have a shipped ROM matching my CID if things go wrong in the future.
Can some one please confirm what model it shows on a TyTN II on Settings > System > Device Information > Identity
on mine (ITA version) Model is Kaiser.
If something goes wrong at this point you can just flashg back to the old SPL using the custom wrapper. Before you flash any ROM your best bet is to instal HardSPL your just asking for trouble if you don't period.
Dils, were you able to fixed your tomtom problem? If not, i suggest you send it back to HTC service center so they can fix your problem.
Related
After flashing to a new ROM - WM6 the phone didn't boot the WM6 installation. Instead the old Orange logo appeared and entered in bootloader mode. I tried restoring the ROM from the original WM5 ROM (Orange RO) but it said Not Allowed. Ok... I flashed then a Cingular WM5 ROM and it worked. The initial logo changed and the OS booted. Immidiatly after the Windows Mobile splash I got a message "Data Crashes. Contact service center". If I remove the SIM card the message dissapears. I think something got screwed during the first flash since it didn't go through. I mention that I used the same ROM to flash another C600 phone and it works perfectly.
So... now I can boot up Cingular WM5 and play around with applications, but as soon as I insert my SIM card the Data Crashes message appears. It is my guess that some vital information such as the IMEI got screwed or a checksum somewhere is not checking.
Do you have any ideea how can I fix this?
You didn't superCID did you?
Sounds like you screwed over your GSM section, check with the SPV Services client if it can read your CID/SIM-Lock status
Phil
It was probably that... but to my knowledge I ran lokiwiz.bat.
No, SPV Services can't read the info from my phone - Illegal readZone attempt - RAPI init failed
stargatesg1 said:
It was probably that... but to my knowledge I ran lokiwiz.bat.
No, SPV Services can't read the info from my phone - Illegal readZone attempt - RAPI init failed
Click to expand...
Click to collapse
this means your phone was not application unlocked properly..
Right! Now spv-services works.
When clicking on the SIMLock Tools I get phone unlocked 00000000000000.
When clicking on the CID Tool I get:
Current CID: 0800313131313131313100000000000000000000000000000000000000000000
Technical details:
Now: 160 = 87554b2c510d9ed5da3c2b29dc9068653ce2b67d2065595e3ce2b67d2065595e, 160 = 4d0c1bd5d17f2fc4
Chg: 160 = 87554b2c510d9ed5da3c2b29dc9068653ce2b67d2065595e3ce2b67d2065595e, 160 = 4d0c1bd5d17f2fc4
cool. Enjoy!
Ok, now try flashing WM6GSMUPDATE and then a WM6 ROM and it SHOULD work
Phil
I flashed the WM6GSMUPDATE and then the WM6 ROM and it still doesn't work. After flashing the WM6 ROM I get returned to the old ROM's bitmap with Cingular logo and then the bootloader appears. Any ideeas? Can you give me a direct link to the latest WM6 ROM? Perhaps mine is somehow damaged although I succesfully flashed another C600.
Thanks.
Any ideas? Please?
Is there any way to fix the "Data crashes. Please contact your service center." problem using a HTC Tornado?
Htc Sda T-mobile Is Dead
MY PHONE IS DEAD WHEN POWER UP ONLY SEE T-MOBILE AND DEAD, THE PROBLEN I HAVE WHEN I try flash a WM6 ROM AND MY COMPUTER SHUT DOWN, NOW IS IMPOSIBILE TO ME TO MAKE A RESET OF THE PHONE YOU KNOW WHAT I NEED TO DO, THANK YOU AND I WAIT YOUR ANSWER
Can you get to the bootloader? If yes, then try flashing again.
Hey guys,
I am a new comer in this forum. I have been trying to update my T-mobile MDA vario for quite sometime now. I have read almost all the guides and instructions in this site. But I don't know what problem I am having. I tried both TNT.1437.Wizard.Touch and TNT.1921_Wizard_TouchFLO roms. In both case the flashing got stuck at 99% and then showed an error 302. then I had to get back to my shipped 2.21 original rom and try again. I also tried XM6r3 rom. I don't understand what I am doing wrong. Please can anybody help me!!! in the guide I was told to flash with 2.26 rom. But whenever I try it it shows invalid vendor id error. ???? What to do now. Is it impossible to upgrade to WM6 in T-Mobile MDA vario. (I CID unlocked my phone following the guide) Any help will be highly appreciated. thanks
MDA vario comes CID locked.. Unlock CID..search for WST... wizard service tool and unlock CID first.
irisiris is mostly right, if you get the invalid vendor id error then you're probably still CID lock. You said that you CID unlocked it already, but it might not have taken. The part he was wrong about though is that WST can't CID unlock your phone, you need lokiwiz to do that which I'm assuming you already knew. However, WST can tell you if you're CID unlocked or not. Just run it on your computer and click the CID actions button and it will tell you if you're CID unlocked or not for sure.
EDIT: Actually I was wrong, mestrini did add CID unlocking to the latest version of WST. Sorry irisiris.
you guys are right I finally CID unlocked my device. I checked it with WST and it said it is unlocked. Now I am in XDA mini rom with IPL/SPL 1.05. now I tried to flash with official tmobile 2.26 rom. but I still get the invalid vendor error. Now what to do????
In case you haven't solved your problem yet, download this file. If the T-Mobile 2.26 is still in the single executable type file that it was when you downloaded it, use either winzip or winrar to extract it to it's individual components then extract this file and allow it to replace the file it needs to replace in the folder you extracted the t-mobile ROM to. Then, just double click on the file to start the flash. Just in case, the name of the file you're going to double click on is named ROMUpdateUtility_Wizard_NoID. This should solve the invalid vendor error.
Hi
I have a Tornado in o2 IQ guise, it is not CID unlocked. When I turn it on I get the o2 splash screen before it goes into bootloader. I tried hard rest but that didn't work so I tried flashing differnt rom, which is how I found that it was still CID locked.
I have tried the solution at http://forum.xda-developers.com/showthread.php?t=388109 to change .nbf header to match that of my phone but this doesn't seem to work Typhoonnbftools just spits out a 1kb .nbf file.
Bootloader reports:
IPL:2.00
SPL: 2.00.0011
Tornado 1U
USB is available and can communicate with the phone using TerraTermm Pro I have tried format BINFS but I'm told "not allowed operation". I really need an o2 UK rom to flash back but it isn't on their site. I looked on the xda-dev ftp but the rom on there is german and has different vendor ID.
Can anyone help?
Thanks
Hi,
I downloaded Official WM 6.1 Upgrade from HTC http://member.htc.com/downloadfiles....0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
and after running that... My system is dead slow and also unable to install few program like Schap's Advance Configurator etc and other issues like
System Reboot time increases....
GPS taking too much time for a Fix
Menu Pop down slowly...
Stucks quite often
.... And after every hour or so the Message popup like that " Please Inform Microsoft about this issue ...... "
Since i am not a computer Geek... Please advice some simple solution ...
Though i also download the official RUU from HTC which released on 21-2-08 but when i run that it tells me that " THIS UPDATE IS NOT FOR YOUR DEVICE " after the SPL screen...
So, is there anyway that i revert back to original System dated 28-8-07
Ur help in this would be highly appreciated....
And PLEASE accept my appologies is this issue has already been raised here...
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Thanks for the reply.....
thomassster said:
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Click to expand...
Click to collapse
Well it takes time to respond to the command... e.g. if i click on the START then it took quite a time for a menu to pop down....... as far as CID unlock... i am not sure....
But i purchased my tytn II from UK as a sim free unit @ 455 pounds... and before that WM 6.1 upgrade, i never played with the ROM or firmware... no SPL nothing anysort run on my unit.... I just run the RUU directly from PC and follow the on screen instructions....
which spl are you using ?
kuzco1 said:
which spl are you using ?
Click to expand...
Click to collapse
currently in Bootloader it shows...
KAIS130
SPL-3.28.0000
CPLD-8
I have an HTC Radar C110e with Windows Phone OS 7.8. The phone is old enough now that I would like to replace the ROM with Dynamics_HD2O_Radar_2_21_Western & RUU_Radar_Radio_17.5006.08.27. I have been trying this for a while and finally thought I can’t be the only person scratching their head.
Phone Specs:
Phone purchased unlocked from expansys
MID: PI06100
SPL-4.6.175006.2(140733)
eMMC SMS 7376MB,FA31
TOUCH A1(F:80,ID:10,V20,B:AA)
Radio-17.5006.08.27
CRC BL CRC-0x4DDA09DA
Software: Windows Phone 7.5
OS version: 7.10.8862.144
Firmware revision number:1750.0602.40603.708
Hardware revision number:0002
Radio software version: 17.5006.08.27_17.08.50.06U
Radio Hardware Version:2.102.0.D4
Bootloader version: 4.6.175006.2(140733)
Chip SOC version: 1.7.5.0
I know that I will need to replace my SPL with a new HSPL before I can load the new Dynamics HD2O Radar ROM. So after looking around, I came upon DFT’s HSPL for HTC second generation devices; looks great! So I downloaded the tool and following the instructions, tried the ROMUpdate utility in the SPL205 folder 1st. The tools starts fine with progress bar on phone and laptop reaching 4%, and then I get an ERROR[294]:INVALID VENDOR ID. The instructions on the DFT site state that if your device has a different CID it will fail with Country ID error. If it fails continue with a GoldCard. Well this error is not the CID, but INVALID VENDOR ID. From reading up on this error, it seems that the vendor code is either wrong or not set on the device. The other option in the instructions was to try the HSPL installer. As the site stated that my MID was correct for Omega (“PI06***”) I suspected that this may now support the direct HSPL upgrade. I launched the DFT_HSPL_WP7SG1_INSTALL tool from the HSPL folder, and again everything seemed to be taking off fine; however no progress! I waited for over an hour, and it never left 0% progress. I disconnected the phone, restarted it, and its fine, but I’m back at square 1.
So where to from here:
Option 1: I have read somewhere that if I can revert my ROM to an older OEM version then the VENDOR ID error will be resolved, and I can then use the DFT HSPL Tool and then load the Dynamics HD2O Radar ROM. or is the fact that I cannot change the SPL going to prevent this?
Option 2: Do I create a Y-Cable and GoldCard and then try to get the DFT HSPL to load? As this was the fix for a CID error, is this likely to resolve the problem of the Vendor ID error?
Has anyone done this before on a Radar, can it be this hard? let's work together to document this for others!