Database Info

Sony Xplod and Froyo

has any one managed to get bluetooth voice dialing working with FROYO and Sony Xplod car system?

Yes
Is the short answer.. What problems are you experiencing? i suspect you need to re-pair the device. to do this first unpair your BT device on your phone by pressing it and holding it. Then on your xplod, long hold the BT button until it disappears.. Then long hold the button again, it will appear, but keep it pressed.. wait until the BT icon flashes... Now on your phone, turn on BT and scan for new devices.. Once you see the xplod, just connect and pair.. No problem no?

dipeshb said:
Is the short answer.. What problems are you experiencing? i suspect you need to re-pair the device. to do this first unpair your BT device on your phone by pressing it and holding it. Then on your xplod, long hold the BT button until it disappears.. Then long hold the button again, it will appear, but keep it pressed.. wait until the BT icon flashes... Now on your phone, turn on BT and scan for new devices.. Once you see the xplod, just connect and pair.. No problem no?
Click to expand...
Click to collapse
When I press the phone knob on car system, it is expected that N1 activates the voice dialer. Mine does not. Incoming calls work great, but FROYO now supports voice dialer for outgoing calls but doesn't play nice with sony.
I will try to re-pair it and see if it solves the problem. Thanks!

Headphone button control don't work sometimes!!

I bought galaxy s3 3 weeks ago and i found this problem. With stock 4.1.2 XELLA and original samsung headphones, sometimes,randomly, button on the headphone dont respond to press. After 1 or 2 plug-out,plug-in or a restart they come back to normal. The mic still work even when the buttons are unresponsive. Anyone had this problem? i dont want to hard reset the phone

sometimes that happens to me and if i hold down VOL DOWN on the phone for about 2 seconds, then press VOL UP it goes back to normal

i made an update from xella to emc2, made a hard reset, problem still here. The buttons only response to long press, like answer button that start google now. I try another headphones and still do the same. No solution for that?

[Q] Hang Up with power button

I have the Moto G. I have enabled the hang up with power button which I find quite useful. However if I am using speakerphone I have no way of unlocking the phone to turn it off or use the phone at all without hanging up, apart from disabling the feature is there any fix? Thanks

I have the same problem!
I also use the power button to end up the calls and then I cannot unlock the phone during the call.
Anyone has a solution? Does this also happens in kitkat version?
Thks

How can phone recognize that you want unlock device instead of end call? It's impossible...

Honor 6x Microphone Muted in Bluetooth phone call

I love my Honor 6x, except I have this problem:
When I am in my car and my car's bluetooth is connected, and a phone call comes in, the car's bluetooth speaker rings the bell, and when I pickup (using the button on my car), I can hear the other party, but they can't hear me.
The bluetooth volume is at max. The car's bluetooth mute is unmuted.
This happens in all my cars so it is not the car's problem.
When this happens, switching back to earpiece or phone's speaker doesn't make any difference. The other party continues to not hear me.
Is there any place in the phone where I can mute/unmute bluetooth?
No, the bluetooth mute on the phone application does not have mute on. The calls work fine as long as I am not on bluetooth.
I have been trying to boot into Safe Mode to see if any app is causing it, but so far I haven't had any luck. I have tried the volume down method to no avail. The Honor 6x does not give any options when pressing Restart or Power Off to choose to boot in Safe Mode in next cycle.
Any help will be appreciated.

I have the same issue without any solution for the moment. Anybody have an Idea ? Thanks

liko2127 said:
I have the same issue without any solution for the moment. Anybody have an Idea ? Thanks
Click to expand...
Click to collapse
Hi liko,
I was able to figure out my issue. It was an app.
I was able to boot it into SAFE MODE. In SAFE MODE the phone doesn't load the 3rd party apps, so you can find out if it is an app causing it or something wrong with your phone. Here are the instructions.
WARNING: all the icons will be shuffled around when you will come out of the SAFE MODE.
1. Power Off
2. Press the power button to turn ON.
3. Wait for honor logo to vanish.
4. As soon as it vanishes, press and hold the volume down button.
5. It should boot up in Safe Mode. You should see SAFE MODE written at the bottom left corner.
The key is to press and hold the volume down button AFTER the honor logo vanishes.
To come out of SAFE MODE simply restart your phone.

Thanks a lot for your answer shah123 but I will have the same issue un safe mod. I have a galaxy Gear s3 and the other can hear me when I use my Watch... And other phones work perfectly un my car... It's a real problem for me

liko2127 said:
Thanks a lot for your answer shah123 but I will have the same issue un safe mod. I have a galaxy Gear s3 and the other can hear me when I use my Watch... And other phones work perfectly un my car... It's a real problem for me
Click to expand...
Click to collapse
I have the same problem with 6X. It resumed mic service after update on 27 Nov 2018. But after working for 24 hours , the fault has now reappeared. Any solution?

Question Can't keep screen closed when ringing

Hello,
I have the Xiaomi Poco 5x pro and when ringing in an incoming call (without answer the call) the screen don't stays closed if power button pressed. The ringtone goes mute, and the screen closes for one second and turns on again.
I want to find a way to keep screen off when phone ringing and i don't want to answer the call.
Any ideas?

I tried what you said and it stays off. (I'm on Taiwan ROM) Maybe try pushing power button with a finger that you haven't registered its fingerprint.