Database Info

ROM in XDA mini corrupted--HELP!!

i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.

Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M

sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.

http://wiki.xda-developers.com/index.php?pagename=HTC_Magician

thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc

taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M

Vodafone v1415 (VOX) application unlock Probs

Hi
I have been trying to application unlock a vodafone v1415 (HTC VOX) using several ways including the standard regedit method here http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
But when i try to alter the reg values i get
"Error" in the title bar and then
Unable to perform this operation
Any ideas out there!!

Hi
Did you ever find a solution to this? Im having the same issue and could really do with a resolve?
Thanks

Hi
Download this tool
http://www.microsoft.com/downloads/details...;DisplayLang=en
Install on your PC then find the following file
C:\Program Files\Microsoft\Security Configuration Manager\tool.cab
copy it to your v1415
run it from your phone
reboot your phone
then connect your phone to your PC run the Device Security Manager
it should say your device is connected
Save the config as something you will remember (in case things go wrong!!)
Then change "Selected Configuration" to security off
Then Provision your phone
Reboot the phone
and thats it
All the best

Many thanks for you reply. I did exactly that this morning and all is now well.
Thanks again.

Other thing:
Put the Cert.CAB de XDA dev, and run SDA Unlocker on the PC, device synchronized.
Then you'll be able to modify registry values to be fully app unlocked.
Another try (but not necessary) is Paul from MoDaCo 's unlocker.

Actually if you choose the security off option from the device secuirty manager it allows full acesss to the registry like a full unlock.
Thanks.

resubscribe

bendy said:
Hi
Download this tool
http://www.microsoft.com/downloads/details...;DisplayLang=en
Install on your PC then find the following file
C:\Program Files\Microsoft\Security Configuration Manager\tool.cab
copy it to your v1415
run it from your phone
reboot your phone
then connect your phone to your PC run the Device Security Manager
it should say your device is connected
Save the config as something you will remember (in case things go wrong!!)
Then change "Selected Configuration" to security off
Then Provision your phone
Reboot the phone
and thats it
All the best
Click to expand...
Click to collapse
What was the name of the tool - your URL link above doesn't work anymore.
G.

http://www.microsoft.com/downloads/...8C-D587-47E0-908B-09FEE6EA517A&displaylang=en

need help to Upgrade wm5 to wm6

Hi PDA gurus,
I am a newbie dont know much about PDA phones,
I have Dopod 818Pro, and want to upgrade it to wm5 to wm6
Pls help me to upgrade it as i dont know,
I have checked the website also www.dopodasia.com, but its not working its showing the weird search page,
and my mobile get restart itself, when it has the battery 25% and dont get log on untill i put on charge
Thanks
Ankur

Hi there,
I would suggest you go hunt around in the forum as your queries has been repeated.
Maybe you would like to try these few steps. (Must have ActiveSync installed)
1. Search in this forum for roms (WM 6.0, WM 6.1, WM 6.5)
2. Download SOFTSPL (search in this forum)
3. Extract the files and put it to root of your phone (next to windows folder)
4. Run SPL.ink from your prophet (Using File Explorer)
5. Screen should turn white
6. Extract the files from the ROM package you downloaded at Step 1.
7. Run ROM update file.
8. Once done, phone will reboot and viola ~
9. A new OS is running in your prophet

Hi Sunset,
I have roamed around the other post also , but not be able to understand.
your 1st step : u r talking about the wm6 download (exe)
2nd step: what is SOFTSPL (need to download 1st in phone)
3rd: which root folder u r talking about
4th: where i can find the SPL.ink
6th: need to run the exe from i have downloaded in phn at step 1?
7th where i will find the ROM updated file
sorry , I dont have any idea of these things, Pls explain me it would be better for me and post a link for step1 and 2

http://forum.xda-developers.com/showthread.php?t=405384
the thread explains it quite well

The Wiki is your guide
Always try the wiki first and read two three times what the methods say and follow slowly that should help you on most of the things mate.

That still fails for Imate Jammin G3
I tried those steps for Imate Jammin G3
After the screen turns white, i run the G3 UPDATEEXE from the computer.
It fails as it couldnt connect.
When i remove and plug back the usb cable from the phone i hear the sound - which indicates the connecitivity.
I have to do soft reset to start the Windows Mobile again
Note : i am trying to Upgrade WM 5.0 to WM 6.1

Problems flashing cooked WM6 ROM

Hi all,
I am following the steps described in the forum.
I have unlock the universal and follow all the steps (i think so)
In my Universal appears the bootleader with the USB when the USB is connected and serial when not. In the PC i have unchecked the usb connection in the ActiveSync etc... But when i run in the PC the "ROMUpgradeUt" program provided with the cooked ROM package it seems that is not communicating properly with the Universal. First of all when it appers the screen that informs you about the current version of the pda and the upgrade to perform, both fields are empty, Then i click in "next" button and after a while (that informs you that the process could take 20 minutes) it appears some error regarding to the connection (i guess)...
More info: No USB HUB but Windows Xp running on wmware, but the Active Sync works perfectly on vmware.
Please could you help me ?
Thanks!

Er.....
I would first update your bootloader to: 2.01
Then i would check if your uni if connecting to the VMware copy of XP,
another opition you could do if partion your hard-drive nad load XP on to it...

OK Thanks!
But i don't find the bootloader version that you point... i have downloaded the one i have from the main thread of ROM Upgrade... could someone put the link?
thanks

Hi again,
My bootloader version is 1.0 so it is a G3, anyway, Can i update it to WM6 or not ?
Thanks in advance

you should bew able to,
Arr yes, hgave u SPLed ur uni?
i updated my bootloader about last year you my best optinion is to pm Orb3000 and ask for his help

Hi!
Thanks a lot for your comments. Problem solved... i didn't reboot winxp after ActiveSynd installation.... (it seems that was the problem). Right now all is perfect!
Cheers

[Q] how to install a rom ?

hi ,
i wanted to ask k how to install a rom ?
i have download .nbf files (roms) and even entered to bootloader version2.01 , in o2 xda exec.
after entring to bootoader , new usb connectn appeard in pc (win7).
what should i do next ? how to install those .nbf file there...
i also downloaded a .zip which contains "UNI_ExitBootloader".
i have also unchked the "allow usb connections" , and "allow data connections when connectd to pc" when i tried to update the driver by pointing them to those zip drivers. it saya my drivers (inwin7) r up to date then those (win vista) , then i tried to sun UNI_ExitBootloader file , error occurs saying to make sure to disable the usb connections , i already unchked them
help me plz

To begin, can you specify your mobile type ?
Did you read all of the topics in its section if there was one?
Did you search a how to on google or XDA ?

N3oTraX said:
To begin, can you specify your mobile type ?
Did you read all of the topics in its section if there was one?
Did you search a how to on google or XDA ?
Click to expand...
Click to collapse
i have o2 xda exec
yes i have google it too , but still im facing that problem as described above !