After I flashed Big Storage Rom and 2.03 new rom, it cannot be reflashed.
The RUU log like this(flashing at bootloader mode):
20:06:19:875 [msg] : Version : [1.4.8].
20:06:22:937 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
20:06:27:156 [msg] : Disconnect ActiveSync .... [2]
20:06:27:156 [msg] : Start Get Connect Port.
20:06:27:343 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
20:08:47:984 [err] : BL Get Device Data Error.
20:08:47:984 [msg] : START UnInitialization !
20:08:48:500 [msg] : END UnInitialization !
And I run RUU in normal mode(turn on magician):
20:14:13:281 [msg] : Version : [1.4.8].
20:14:13:281 [msg] : Config Info : [776571],[1],[1],[0].
20:14:14:234 [msg] : Current in CE Mode.
20:14:21:515 [msg] : Device BL VER : [] [].
20:14:21:515 [err] : Device CID Error.
20:14:21:515 [msg] : Update Image. CE : [4], MSystem : [2], Radio : [1]
20:14:39:609 [msg] : Check Ac in CE mode. AC : [1]
20:14:41:125 [msg] : IsBL. BL : [0]
20:14:45:390 [msg] : Enter BL OK.
20:14:49:468 [msg] : Disconnect ActiveSync .... [2]
20:14:49:468 [msg] : Start Get Connect Port.
20:14:49:468 [msg] : Cann't Find Any USB Port
20:14:53:078 [msg] : Cann't Get COM Port Response.
20:14:53:078 [msg] : Open USB and COM Port Error. [1]
Can someone help me?
Nobody can help me?
my poor magician, nobody can help me.
Dear Sir,
you NEED to disable the "Allow USB connections" option on ActiveSync before trying to do an upgrade.
-= Do notice that the upgrade process does not work using Windows Vista. =-
Best Regards,
Keeper
Keeper said:
Dear Sir,
you NEED to disable the "Allow USB connections" option on ActiveSync before trying to do an upgrade.
-= Do notice that the upgrade process does not work using Windows Vista. =-
Best Regards,
Keeper
Click to expand...
Click to collapse
Thank you for your reply, I disable the "Allow USB connections" selection, but it did not work. My PC system is XP.
Thank you all the same.
Uh...it seems that you're replying on both threads...check the other one.
Keeper
Related
i have an i607 and it handed wen i went on gprs for browsing.i try to flashed it wid
SGH-i607 WM6 Upgrade
i also have active sync and its modem drivers all r perfectly installed but wen i try to conect the fone i saw the following on screen
USB Initial: OK
PC Connection: Fail
[Phone] Active OFF
[PDA] USB Cable Power OFF
how to solve my problem.plz some body help me
See you this is compatible
Samsung I 607
Can i flash a samsung i 607 with any of these roms ??
Thanks
Yes. You can upgrade with all any ROMs for i607
1. Windows XP
2. Change connect menu: Setting--> connection--> USB-> change to Modem: Computer receive information modem mode for Boot ROM in the next step
3. Turnoff and turnon to Boot mode. and plug USB cable and UP ROM
Good luck
Hi, I'v received a second hand HTC Cruise, locked to SFR and in French, I want to unlock and chenge to English. I read al lot these days trying to unlock it but it seams that the USB port is disabled, active sync is not working and when I plug the USB cable the PC does nothing (not even recongize that something is in that port)
The HTC Ext seem ok the previos owner never synced but headphones are ok, charging also.
I'e tried several method to acces the device via USB with no results, seems that the only posible solution is by so called HTC GOLD CARD or a HTC DIAGNOSTICS CARD so i can change the ROM from a SD CARD since I can not access the device via USB
I also went to the four colors boot loader screen and try to sync from there but no results.
Bootloader Info : (red zone)
POLA100
SPL-1.25.0000
CPLD-2
(white zone)
Serial by default
USB when I plug the USB Cable
My HTC Cruise data is
Vers SFR_V3650
ROM VERS : 1.25.163.9 FRE
ROM DATE : 06/18/08
RADIO VERS : 1.58.21.54
PROTOCOL VERSION : 25.63.30.04H
What can I do? How should I proceed to change my ROM
Thanks in advance.
PS : I've try ActiveSync with two cables in two diferent PC always the same result, the PC dont even sees that the device is on.
Is there any kind of program or tool to see if the port is enabled and working fine?
Can someone plz give me a full guide on flashing it on vista because i keep getting stuck and all the guides keeps messing me up so i get even more stuck.
Foe one when i plug in my phone in downloader mode and try to update drivers it says my drivers are already up to date and when i start the image downloader i get
[StartDownload => 0] StartDownload !!
[-] Connect and Power-on the Device.
[-] Device Not Found.
Can someone plz give me a full guide
install windows mobile device center
run phone in bootloader mode
uncheck allow usb connection
connect cable to pc
manually update samsung mits usb sync with vistaruu driver (wceusbsh.inf)
then turn on your phone, accept allow usb connection and synchronize it with windows mobile device center
when synchronization is complete uncheck allow usb connection
remove usb cable, run phone in bootloader mode,start
image downloader connect usb cable and wait a moment then start flashing
VistaRUU driver: http://www.fileden.com/files/2010/1/18/2729115//VistaRUU.zip
Alright thank you I'm gonna try in a little bit and I'll post how things go
OK Good luck.
alright i finally got it to work thx for the help
Hi,
I'm new to rooting and custom ROMS so please go easy on me.
I'd this old phone of my brother GT-S5570, wanted to install kitkat 4.4.3 so followed this site
droidthunder.com/install-android-4-4-3-kitkat-cyanogenmod-11-custom-rom-samsung-galaxy-minipop-gt-s5570
The site said I needed Clockwork installed in my phone , But I couldn't install clockwork via phone so I followed this procedure
Opened-- ODIN
Selected OPS -- TASS_v1.0
One Package --- tass-recovery-cwm
Success that is what it showed in ODIN and I rebooted the phone started as usual.
Then tried recovery mode .... Stuck on SAMSUNG LOGO forever
Took out battery restarted it in normal mode working fine
Tried recovery again not working but Downloading mode and ARM mode working.
Now I Installed ROM MANAGER and asked it to restart in Recovery mode....
Phone stuck on Samsung LOGO even in normal start mode
Recovery mode doesn't work ( Home + Power ) but Downloading mode and ARM mode working.
Trying to install official Gingerbread 2.3 via ODIN just to recover the phone (I've no backup doesn't matter either)
Select OPS ---TASS_v1.0
One Package- S5570ZSKPB_S5570OZSKPB_S5570XXKPL_HOME.tar.md5 (Okay)
Turned on phone in Download MODE (Okay)
But when I press START
I get
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
Tried different ports ,installed Kies , even tried Home+Power+Vol Down then Inserted battery with everything pressed but no luck.
BTW Windows notification says Samsung Composite and Modem installed whenever I change the port after Laptop restart.
Please help
VimalLFC said:
Hi,
I'm new to rooting and custom ROMS so please go easy on me.
I'd this old phone of my brother GT-S5570, wanted to install kitkat 4.4.3 so followed this site
droidthunder.com/install-android-4-4-3-kitkat-cyanogenmod-11-custom-rom-samsung-galaxy-minipop-gt-s5570
The site said I needed Clockwork installed in my phone , But I couldn't install clockwork via phone so I followed this procedure
Opened-- ODIN
Selected OPS -- TASS_v1.0
One Package --- tass-recovery-cwm
Success that is what it showed in ODIN and I rebooted the phone started as usual.
Then tried recovery mode .... Stuck on SAMSUNG LOGO forever
Took out battery restarted it in normal mode working fine
Tried recovery again not working but Downloading mode and ARM mode working.
Now I Installed ROM MANAGER and asked it to restart in Recovery mode....
Phone stuck on Samsung LOGO even in normal start mode
Recovery mode doesn't work ( Home + Power ) but Downloading mode and ARM mode working.
Trying to install official Gingerbread 2.3 via ODIN just to recover the phone (I've no backup doesn't matter either)
Select OPS ---TASS_v1.0
One Package- S5570ZSKPB_S5570OZSKPB_S5570XXKPL_HOME.tar.md5 (Okay)
Turned on phone in Download MODE (Okay)
But when I press START
I get
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
Tried different ports ,installed Kies , even tried Home+Power+Vol Down then Inserted battery with everything pressed but no luck.
BTW Windows notification says Samsung Composite and Modem installed whenever I change the port after Laptop restart.
Please help
Click to expand...
Click to collapse
using older odin, ex 3.07
tonypro79 said:
using older odin, ex 3.07
Click to expand...
Click to collapse
I'm using Odin 4.3,
BTW are you suggesting to use 3.07 ?
Thanks for the quick reply
Hello friends,
i wanted to unlock my bootloader and bought a 3 day timed licence for HCU and DC Phoenix. I could put my Phone into software Testpoint Mode and it is still available as "HUAWEI USB COM 1.0" - so far so good.
So i wanted to unlock my bootloader and this is the LOG Output for HCU:
13.05.2023 05:49:43
HCU Client v1.0.0.0382
Before operation turn phone to TestPoint mode:
Turn off phone, then short TestPoint on phone pcb
and plug USB cable
Wait for device "HUAWEI USB COM 1.0" in Ports
Read phone info
2023-05-13 05:49:43.682 Selected Cpu/Bootloader - Kirin980_P1_V3
2023-05-13 05:49:43.682 Connecting to server...
2023-05-13 05:49:43.792 Connected!
2023-05-13 05:49:44.323 Find device COM9, handle 10872
BOOTLOADER selected to update:Kirin980_P1_V3
downloading file Kirin980_P1_V3_0.dtwork...
downloading file Kirin980_P1_V3_2.dtwork...
downloading file Kirin980_P1_V3_3.dtwork...
downloading file Kirin980_P1_V3_4.dtwork...
downloading file Kirin980_P1_V3_6.dtwork...
2023-05-13 05:51:51.429 Waiting for device REMOVAL/INSERTION...
2023-05-13 05:52:06.431 Operation timeout
2023-05-13 05:52:06.447 Operation timeout
2023-05-13 05:52:06.463 Operation timeout
OK, then i wanted to disable software Testpoint Mode via DC Phoenix and it doesnt work anymore, so im stuck in software Testpoint Mode, see:
Doing job: Disable software testpoint
Looking for devices...
Looking for devices in testpoint mode
Device detected:
COM8: HUAWEI USB COM 1.0 (COM8)
BOOTLOADER selected to update:Kirin980_P1_V3
DC Phoenix 0.0.0.173
Device detected:
COM8: HUAWEI USB COM 1.0 (COM8)
BOOTLOADER selected to update:Kirin980_P1_V3
13.05.2023 06:18:46 Starting to write device...
Process identifier:64945740
Validating file...
Writing bootloader...
Step 2...
Step 3...
Step 4...
Step 5...
Step 6...
Waiting for device REMOVAL/INSERTION...
Waiting for fastboot device...
USB Device REMOVAL
Type: @oem32.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&1e0d7d1c&0&13
No devices detected in testpoint mode
Error detecting device in fastboot mode
Looking for a device in fastboot mode
No devices detected in fastboot mode
13.05.2023 06:19:48 Writing device finished OK
I dont know what to do next and to get out of software testpoint mode! :-(
The Phone has a black screen and booting Fastboot doesnt work (with Vol- and PWR, or only Vol- and USB Cable)
It seems like I can reboot to software Testpoint mode when i long press PWR-Button, as the Device "HUAWEI USB COM 1.0" goes and comes back in windows device manager.
I also soldered a special cable for Testpoint Mode with 10K Resistor between red/green line but it also brings the same log as above.
Didnt get any help yet from HCU/DC Unlocker Forum but my licence will also run out in two days
I would be grateful for any help and tips what i can do, just to get out of testpoint mode. Thank you!!!!!
PS: what happens if the battery of the phone runs out now? right now i have the phone attached to a loader 24h...