i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
tried to put an image on my device and befor moving the installation gives an error and i found the screen wrote usb from up and v 1.00 from down and nothing happening even after many resets !!!
It is stuck in the bootloader.
Try to upgrade again.
The Wiki will tell you.
Your Uni is most probably fine.
thank you .. your commentsresolved my problem .. i followed the steps in the WIKI
thanks again
try this for dead mobile
try this for dead mobile
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Try It For Boot Problem.
aymn_louis said:
tried to put an image on my device and befor moving the installation gives an error and i found the screen wrote usb from up and v 1.00 from down and nothing happening even after many resets !!!
Click to expand...
Click to collapse
TRY IT FOR BOOT PROBLEM.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Hi
I was installing Resco Suite on my Universal, after installation I performed a soft-reset, it restarted as it does normally, but restarted again after a couple of minutes.
Now it keeps restarting again and again. Can you please guide me what sort of problem it is and how it can be solved?
Regards
sulehri said:
Hi
I was installing Resco Suite on my Universal, after installation I performed a soft-reset, it restarted as it does normally, but restarted again after a couple of minutes.
Now it keeps restarting again and again. Can you please guide me what sort of problem it is and how it can be solved?
Regards
Click to expand...
Click to collapse
Try to hard reset and you´ll have the problem solved
If more info needed on how to do that, read here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Hope it helped,
Thankyou
hi there,
i have just got a htc hermes 200 from a friend and it worked perfect untill i set the time and date now wen i boot it up all i get is a screen that says "this concludes the beta test of this software relese yada yada... it wont sync to my pc at all. but it will boot in try couler screen please guys i need help
thanks in advance
ben.
ps i have wm6 but it wont sync so i cant put it on
Welcome to forums
Perhaps doing a hard reset it could help your problem, or maybe reflashing a ROM.
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Good luck,
soft key
witch is the left and right soft ket
i got it
thank you so much friend hard reset worked a treat
hi friends...
I gotta bad problem..
I flashed my kaiser with rom ultimate x2 v8 and after 2 or 3 days it doesnt boot up..
I mean...
it boots up till that vista logo... (screen that says "prepairing your device...")
and then it goes blank..
I performed hard reset sevral times but was not useful.
how can I re-flash my kaiser without a sync with computer?!
plz help me out!!
do a search first
Masoud65 said:
hi friends...
I gotta bad problem..
I flashed my kaiser with rom ultimate x2 v8 and after 2 or 3 days it doesnt boot up..
I mean...
it boots up till that vista logo... (screen that says "prepairing your device...")
and then it goes blank..
I performed hard reset sevral times but was not useful.
how can I re-flash my kaiser without a sync with computer?!
plz help me out!!
Click to expand...
Click to collapse
this will do it
http://forum.xda-developers.com/showpost.php?p=1572072&postcount=1
Get your phone into bootlader "instructions in WIKI" and flash stock ROM via usb "no sync needed"
In future use the search and read the sticky thread closed.