hi there,
i have just got a htc hermes 200 from a friend and it worked perfect untill i set the time and date now wen i boot it up all i get is a screen that says "this concludes the beta test of this software relese yada yada... it wont sync to my pc at all. but it will boot in try couler screen please guys i need help
thanks in advance
ben.
ps i have wm6 but it wont sync so i cant put it on
Welcome to forums
Perhaps doing a hard reset it could help your problem, or maybe reflashing a ROM.
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Good luck,
soft key
witch is the left and right soft ket
i got it
thank you so much friend hard reset worked a treat
Related
I own an MDA compact on t-mobile uk,
whilst on there homepage i saw a "update your MDA software"alert,
i downloaded the software and ran it.
the MDA then went off and when turned back ran a hard reset.
the MDA then runs thru the set up,when thats complete is shows a grey type screen with serail v1.02
its frozen on this screen and unuseable any effort to do anything makes a repeat cycle of the above
please help me turn my paperweight back into a pda
thank you very much
(i think im best sticking to a standard phone from here on in,im not techy enuff to have a pda.doh!)
ur just in bootloader..go read wiki
u gotta press the reset,power and record camera btton together..thats wot i do for my 9090
thank you very much for your help
its appreciated .
ill try that
thanks again friend.
Jace,
the power & camera & soft-reset button will bring you in bootloader, just where you're now.
You'd better connect USB & run the update again. Something got broke the previous time, that's why you're in bootloader now.
Regards, M
brill guys ta
only problem(sorry guys still learning)from the bootload screen the pc wont see the device is connected and if i try to run the device to get to a standard screen to sync it just reboots?
how do i actisync while in bootloader?
ta
Jace pls don't try Act.sync. Run the update again :!:
ive manged to get the pc to see the pda and ran it under a guest partnership,
once it had seent he pda, i re-ran the update,but each time it goes thru the motions then gives and error msg.
man im goin back to a normal handset next time
What rom nr are you flashing? & what's the error message?
Cheers, M
Thanks for all your help sorry to be such a pain.
i got the file from the tmobile uk site .
file name ma-tmuk-11300-128-11200
when connectiong its says
updating from
device ce image:1.13.00
device ext imagethis is blank)
deivce radio:1.12.00
up dating to
device ce image:1.13.00
device ext image:1.13.128
deivce radio:1.12.00
it runs thru then stops and says
error 101:connection error
thanks
when booting up the bottom right shows
R 1.12.00
G t1337.42
D 1.13.00wwe
Ok that's the 1.13WWE rom, which is available sine october last year. Should be a normal rom without problems. If you never updated before & still in your warranty period, return your device.
BTW have you rebooted your PC during your sequence off tries?
Guess your no pain, but you got bad luck in upgrading this time. You did the right steps to cure everything.
Cheers, M
great thanks,
i have rebooted pc but ill do that then retry nothign to loose at this stage thanks mate
Did you ever make a rom-dump of your working device? Otherwise you can try to make one now & do a SD-update.
Cheers, M
no i didnt mate doh
ta for all your help mate appricated
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
Guys,
I ve just downloaded this http://rapidshare.com/files/21256078/WM6_21007_DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Actually this one might help:
http://forum.xda-developers.com/showthread.php?t=310056
Nevermind;
This Thread will surely help:
http://forum.xda-developers.com/showthread.php?t=310055
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
bagi said:
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
Click to expand...
Click to collapse
DO NOT PANIC !!
it's funny because I did the same thing when I saw my phone doesn't hard reset! Okay , hold the camera button, while holding the camera soft reset ! keep the camera button until you get to bootloader! ( by this time you will feel much better) then download an original wm5 ROM ( NVID) and upgrade your phone with it. if you didn't understand what i said, you have to read the wiki!
Welcome to the world of PPC junkies !
hy i wanted to upgrade my rom so first of all i backed up my contacts bla bla, took out sim and sd card, hard reset of the htc x7500 all well , i started the device and followed instructions on screen, connected the usb synced perfectly. executed Athena wrapper.exe all went well completed , everything was working fine, then soft reset the device to check if all was ok (ps. setup already finished on pc and mobile) and guess what the green light at the joystick comes up but nothing else blank screen ( hep me what can i do from this point, i can enter the boot loader, if i connect the usb, in the white bit of the boot loader i get from serial change to usb but on pc nothing saying sync connected or anything like that. il try reinstalling the active sync on the computer see if that works .
oh great gurus of this forum please help me with this urgent matter
thank you anticipated
ps it is my first time doing this , i have it knowledge, and i read for 5 hours inos and how to's from the forum before i did this and it still happened this mysterious problem hopefully not terminal (((
I hope that you did not take the hard spl from this forum.
This subforum and releases are for the X7510.
no i took it from the X7500 section , anyway i solved the problem :d thanks to the instructions from here :
h ttp: //forum .xda-devel opers.com/show thread.php?t= 326953
Link from above just delete the spaces and there you have it, i could not post it together as i am a new member and does not let me put the link yet.
i followed the link in the firs post ( the one replied to the quoted text) downloaded from there the rom update and from bootloader screen it went like a charm, after that i upgraded the rom to 1.58 witch i dont quite like it as it keeps showing only H instead of 3G or the type of connection either the settings i setup in the phone, and installed the AP4 platinum ROM and works well. hope others will get their problems solved like this too as i saw there are many with the same problem.