Guys,
I ve just downloaded this http://rapidshare.com/files/21256078/WM6_21007_DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Actually this one might help:
http://forum.xda-developers.com/showthread.php?t=310056
Nevermind;
This Thread will surely help:
http://forum.xda-developers.com/showthread.php?t=310055
Related
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
bagi said:
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
Click to expand...
Click to collapse
DO NOT PANIC !!
it's funny because I did the same thing when I saw my phone doesn't hard reset! Okay , hold the camera button, while holding the camera soft reset ! keep the camera button until you get to bootloader! ( by this time you will feel much better) then download an original wm5 ROM ( NVID) and upgrade your phone with it. if you didn't understand what i said, you have to read the wiki!
Welcome to the world of PPC junkies !
Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
THere are many posts like this.
Did u do your reading before flashing? Are you using Vista, if so get on a computor running XP, u cannot flash with vista.
Did you unplugg all ur usb devices and any other connection software? Try also other usb ports. I had to try 3 of my 4 before flashing worked for me.
Please read the wiki and search the forums tho, there are many good guides out there like this one attached (apols for zip file, i had saved the web page for use ages ago)
You also dont say what ur IPL/SPL numbers are so its difficult to help, you should list the steps when posting if you need help
Get back if you need more help...
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hi, I had similar problem even after repeated tries. What I did to get around it was:
1) Run the HardSPL (from Prophet tools or from RUU).
2) Check "I understand the caution..." and click next to get to 2nd screen (see attachment) on RUU where it gives you the 4 things to check before proceeding (here your Prophet must be entering the white screen).
3) Leave the RUU on the 2nd screen on the computer and disconnect Prophet after white screen gets stuck and activesync disconnects).
4) Reboot Prophet.
5) Reconnect Prophet and wait for activesync connection to be established.
6) Now on the computer check "I completed the steps indicated above" and click on next.
Hopefully this should go ahead and HardSPPL your Prophet.
Do let us know if this worked.
possible solution for ya
Code:
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hey,same problem here...but you probably got rid of the prophet already...well hope it helps someone else
thank God i had surfed to other sites and found this HARD SPL utility.
Its in "wm6 Update_Package" ...might as well be from here..
(dont know who made it-i`ve been downloading so much stuff lately from the web no offence )
maan...how do I add an attacment here?
ahah-here it is..
hey...what`s up with this...cant upload...its under 8mb,why is it bugging me with "upload of file failed"?
ok...this means war..
anyway here is the link http://rapidshare.com/files/233302800/HardSPL_G3_and_G4.rar.zip.html
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
pinoy ka gin???
text mko kung malapit ka lang sa manila.. help kita...
09085524216
Hi
where i can download hardspl for g4?
hi there,
i have just got a htc hermes 200 from a friend and it worked perfect untill i set the time and date now wen i boot it up all i get is a screen that says "this concludes the beta test of this software relese yada yada... it wont sync to my pc at all. but it will boot in try couler screen please guys i need help
thanks in advance
ben.
ps i have wm6 but it wont sync so i cant put it on
Welcome to forums
Perhaps doing a hard reset it could help your problem, or maybe reflashing a ROM.
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Good luck,
soft key
witch is the left and right soft ket
i got it
thank you so much friend hard reset worked a treat