Database Info

Linux for Magician: who is working there?

I'm sorry for being so loud, but I've seen a few "progress pages" in Wikis and I still can't get a clear picture of who (if anyone) is actually working on linux for the HTC Magician (Qtek s100, iMate Jam, Dopod xxx, etc.).
I found this project:
http://userpage.fu-berlin.de/~zabel/magician/README
and it appears to be very very promising; it already delivers some small functionality on the magician (I've tried it). But there is much much work to do before it can be released to the general public.
In general, I don't think there are many people working to get the Magician on Linux...
So I am asking here: are you working on this? do you know who is working on this?
I am a SW developer by trade, but I have no time at home to code.
However, I would like to give whatever little time I can find to:
- act as a beta tester;
- develop one or two patches (kernel mostly);
so we can get Linux running on the Magician.
Thank you.

Hi,
This doese indeed look promising.
I have no qualifications in software etc, but i do like fiddling with linux -).
I too would be a beta tester.
So is anyone working on this?

Hi. As vnevoa found out, I am working on the Magician when I find the time.
Unfortunately, to my knowledge, there is no-one else currently working on this. So developers are needed!
For people interested in kernel hacking, there is the [email protected] mailing list and the #htc-linux IRC channel on freenode.net
The biggest missing parts currently are battery control, sound and the phone.
For everyone else, any improvements to the Magician wiki pages would be more than welcome. To build a proper userspace image for the Magician, support for this machine in OpenEmbedded has to be improved.

Wow!
That haret thingy is wonderfull.
What is the current state of the version for the Magician? Does it boot to GPE?
This is a great thing, really. No need to flash a new firmware, and boot linux! Amazing. I'm using Linux on ipaq and it is very nice. But I would miss phone operation. With haret we can have both things running.

Good work. Has anyone tested USB host on magician under linux?

futaris said:
Good work. Has anyone tested USB host on magician under linux?
Click to expand...
Click to collapse
USB host works, but it is not connected to the usb plug.
The bluetooth chipset is a CSR usb chip.

pH5 said:
USB host works, but it is not connected to the usb plug.
Click to expand...
Click to collapse
does that mean, usbnet is not possible? in my case, nothing happens if i connect the magician to my computer. dmesg and lsusb say nothing about a new device. insmodding usbnet doesnt help either. tried the same with a htc universal, usbnet works fine on my machine.
[edit]works for now, if connected via external-powered usb-hub. maybe a driver problem? activesync in windows-mobile is possible without using the hub.[/edit]

And if you check the website you can see all teh file you need to download if anyone know a programm for make call/sms/mms or ONLY calls and run on this linux please give information about
ok i try this one in a few and i edit my post when i have test all
ok today the : 28.12.2006
mmmm i have some trouble with extracting the gpe archive it's seem to be corrupted soooo bad.
BUT the first problem it's this famous default.txt the script to run haret if anyone have a working script please copy information here of the .txt file that's can be helpfull.
the error of my default.txt is: Failed to load kernel \carte de stockage\zimage
must i need to rename the zimage file???
and i have a question ... it's possible to make a "bootable" SD? if yes i can try to run another handled linux perhaps???
OK i have found i must rename the magician-zimage-2.6.XXXX to : "zimage"
so i have downlaod latest version of haret and take the default.txt WITHOUT changing
harte start but of course i haven't the gpe file so it's say error BUT it's launch now i must really found a good archive i have try under linux but the archive still in read only i can't change it to read AND write so all i uncompress are still not working under linux it's better on windows don't know why .....
(mmm risk to brick my magician if i try another gpe file .......)
and of course: sorry for my bad english
now i edit the post when i have MORE important news

Hard SPL with linux

Hi
First time post, please be gentle.
I am trying to flash a new rom onto my tytn II but I do not have windows or activesync on my PC.
I have tried searching but have not found the answer I need
Can I flash Hard Spl with linux only
Please help
Thanks in advance

You're probably best installing VM Ware onto Linux and then getting a copy of Windows to run through VM Ware. I think the USB should still work through this.
Not been tested but this is the best I can offer.

thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync

mac_d4di said:
thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync
Click to expand...
Click to collapse
There is a SD method, but don't know if can work to put HardSPL, because HardSPL needs to execute SSPL into the PDA before flashing the new SPL.
I have tested WinXP box inside Windows Vista to flash using VMWare, and works fine, so XP box inside Linux must work too...
Cheers.

Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions

mac_d4di said:
I am trying to flash a new rom onto my tytn II
Click to expand...
Click to collapse
I don't know what is hardspl, but have you checked hermflasher ?
Maybe it will work with some minor changes:
http://forum.xda-developers.com/showthread.php?t=296436

mac_d4di said:
Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions
Click to expand...
Click to collapse
Yes, you can use the SD method with the ROM matching your CID (inside your SPL). This allows you to put a ROM from the manufacturer/oem of your Kaiser.
You sould not install any ROM before having HardSPL...
Search the SD method on the Wiki. With the Sd method you only copy the NBH file into SD and go to bootloader...
Cheers.

Thanks for your comments, very helpfull indeed I will look into both of the methods described and report back on my progress

I've used VMWare without a problem. Make sure you set up your fstab file to allow quickswapping USB in VMWare or else you have to constantly suspend and start windows just to get it to recognize the USB after it disconnects.

Hi
Does anyone have a copy of SSPL-KAIS.exe that they got attach or PM me. thanks.
After digging a little deeper this may work although it has been removed from the main site
**found it dont worry

Rom flashing on a Mac

Has anyone ever tried to flash a rom or develop a rom that can be flashed by a Mac? I have Missing sync to sync my Tilt and to download .cabs and .exe's.
Works great by the way. I have flashed several roms from Windows XP on the " other side " of my Intel chip, so no problem there. Just wondering can it be done from the Mac side? And has anyone done it?
I have been using Macs and Apples for over 25 years ( started with Apple IIc) and never once had the urge to switch so comments from the "Apple Bashers" will mean nothing to me
Just curious.

no i'm not going bash apple but i haven't come across anything for mac and i believe the kaisercustomruu.exe can only be run only on windows

I have successfully flashed my Tilt using a Parallels install of XP Pro. Of course that requires an Intel Mac to accomplish...

NotATreoFan said:
I have successfully flashed my Tilt using a Parallels install of XP Pro. Of course that requires an Intel Mac to accomplish...
Click to expand...
Click to collapse
I have flashed several roms using both Parallels and Bootcamp on the other side of my Intel/Mac chip and .exe file will not run on OS X but is it possible to create a rom using say a .dmg package instead of an .exe package?

The problem is far beyond the fact that the package is in exe the tools to actually flash the rom are windows only

I'd just flash from the MicroSD card.
Read here:
http://forum.xda-developers.com/showthread.php?t=336158

AstainHellbring said:
The problem is far beyond the fact that the package is in exe the tools to actually flash the rom are windows only
Click to expand...
Click to collapse
Obviously you can't just re-package under a different file extension. What " tools " are you refering to? Kitchen tools? Again just re-packaging. Leopard can run on an intel chip. Word, Excel, etc, can run natively on a Mac. Can you put together a rom or write one from scratch that can be downloaded natively to a Mac and then flashed to a Kaiser? Even theoretically?

You can use whatever OS you want... Just do what Peterfnet suggested... Use the SD card method... It's safer and easier.
Just follow the link provided by Peterfnet!

Rayan said:
You can use whatever OS you want... Just do what Peterfnet suggested... Use the SD card method... It's safer and easier.
Just follow the link provided by Peterfnet!
Click to expand...
Click to collapse
It wasn't a "how do I flash a rom question " , I press a button and my screen twirls from OS X Leopard to Windows XP , I flash a new rom, press another button and my screen twirls back to Leopard and all my Mac apps. ( new Intel Chip for Mac)
The question was " what do the knowledgeable people here think? " Are there limitations of computer science that would prevent this or just limitations of available ground work that I could create?
Edit: I re-read this post and it sound kind of terse, I didn't meanit that way.
Thanks for your input Rayan

I see no reason why it would not be possible to flash a ROM natively inside Mac OS. But in order to do so, the flashing application written by HTC would need to be recoded to run on Mac.
If you extract the .exe file that is inside the rar file posted by the chefs here, you will see 5-10 files, one of which is the OS.nbh file. If you can write a program for Mac OS that can communicate with the Kaiser and call that file, then it would be possible. (DISCLAIMER: I am NOT a programmer, so it is a definite possibility that I could be talking out of my ass.)
Since flashing is not yet available to Linux users, then Mac is probably still a bit off.

peterfnet said:
I'd just flash from the MicroSD card.
Read here:
http://forum.xda-developers.com/showthread.php?t=336158
Click to expand...
Click to collapse
best option all around

Well, ever since I discovered the SD Card method I don't flash it through the PC anymore... No more fears of freezing up, power failures and such!
In fact, I carry several "test" ROMS in my card just to install them on the go whenever I'm bored! LOL...

Here's an answer from someone who is paid to write software....
You're correct there is no technical reason that you can't flash your phone from a Mac OS.
Basically the whole process is a few commands & responses sent across the USB port and then the nbh image streamed via the port to the waiting device.
Here's the bind: Microsoft is well known for not working well with others. Why would they be motivated to provide non-MS OS the ability to flash "Windows Mobile"? It's kind of like iTunes being able to integrate with non-iPod MP3 players as well as it works with iPods (or so I've heard).

Thanks all , it looks like I have my next project. Thanks for all your input. peterfnet and Rayan thanks when HTC comes out with their new rom update and new driver package at the end of the month I'm going the card method for a change.

using linux to burn roms

Any one know if there exists tools to connect and burn roms from a linux box, instead of a windows? I'm not interested in burning a linux rom on to my tilt (not yet, anyway). Just using a linux desktop instead of windows. I have tried using windows from a vm, but had problems with the usb connection.
If you can point me to the source of the tools, I can, probably, help port them to linux. however, I'm guessing the tool that establishes the communication (handshaking) with the kaiser would be the bulk of the requirement.
Erol

If you mean flash ROMs, then use the sdcard method. Hope this helps.

You can also use WINE to run the app.
Kraize

if you actually searched you'd see there is already a tool, search for htcflasher. and its called flashing, not burning.

I flash off the card almost exclusively. I use the office computer for hardspl if there is an update, but a simple card reader and mepis is more than happy to help me swap roms.

vcysion said:
if you actually searched you'd see there is already a tool, search for htcflasher. and its called flashing, not burning.
Click to expand...
Click to collapse
While "flashing" is the term that correctly describes the process that loads software into the phone, "burning" has for a very long time been a verb that describes writing to ROM. It's actually the use of "ROM" that is incorrect because the phone's memory is not really read-only.
Kraize92 said:
You can also use WINE to run the app.
Kraize
Click to expand...
Click to collapse
Are you sure about that?

Just use Nero to burn ROM . LoL..
i think pof has released linux rom flasher..

HTC Flasher
http://forum.xda-developers.com/showthread.php?t=399762
you need to compile and insert the ipaq kernel module for it to work.
Personally, i still haven't got it working on gentoo (compiled from source) but im gonna try again later.
Havent had *any* luck using wine/vmware/virtualbox or any emulation as it messes with the USB. Active sync definitely doesn't work through wine.

[IDEA]Possibility of running Windows 8 on Galaxy Tab 3 10.1

Hi guys !
I wanted to know whether the new Samsung Galaxy Tab 3 10.1 can run Windows 8./LINUX !!
Theoretically it shouldn't be too hard as it has an Intel Atom x86 processor and it shares a lot of it's specs with the Acer Iconia w510 and other tablets running Windows 8
Can you please tell me some of the issues that we may have to deal with ?
Like we will have to do something with the bootloader to make Windows 8 bootable and things like that :/
And please if you want to say something like -Why do you want to run windows on an Android tablet-
XDA is about modding. A new OS will not hurt anyone AFAIK.
What are your ideas ? I think it can be done but what will we need to do ?
Now we will be concentrating on Linux. it Will be easier.
Please use this thread for discussing Linux on the Samsung Galaxy Tab 3 10.1
Thanks for reading !

Nitro_123 said:
Hi guys !
I wanted to know whether the new Samsung Galaxy Tab 3 10.1 can run Windows 8.
Theoretically it shouldn't be too hard as it has an Intel Atom x86 processor and it shares a lot of it's specs with the Acer Iconia w510 and other tablets running Windows 8
Can you please tell me some of the issues that we may have to deal with ?
Like we will have to do something with the bootloader to make Windows 8 bootable and things like that :/
And please if you want to say something like -Why do you want to run windows on an Android tablet-
XDA is about modding. A new OS will not hurt anyone AFAIK.
What are your ideas ? I think it can be done but what will we need to do ?
Thanks for reading !
Click to expand...
Click to collapse
much like apple windows 8 is closed source. Thats pretty much the end of the thread. Without a way to compile, edit the operating system and know what changes your making its just not a undertaking many will accept.

@trevd Do you have anything to say about this ?
@wranglerray I'm just talking about installing windows to a device. AFAIK no compiling/editing will be needed. There are other tablets out there that do the same thing so why not this one ? The only major hurdle I see is making some kind of a custom bootloader that can boot the windows stuff instead of the android stuff. THAT part will probably need to be made from scratch or it may be ported from a similar device.
There are quite a few devices like this that run windows with similar specs so why not this one ?

Nitro_123 said:
@trevd Do you have anything to say about this ?
@wranglerray I'm just talking about installing windows to a device. AFAIK no compiling/editing will be needed. There are other tablets out there that do the same thing so why not this one ? The only major hurdle I see is making some kind of a custom bootloader that can boot the windows stuff instead of the android stuff. THAT part will probably need to be made from scratch or it may be ported from a similar device.
There are quite a few devices like this that run windows with similar specs so why not this one ?
Click to expand...
Click to collapse
well quite honestly your talking about porting windows to a device. Our device comes with android and you want to port windows to it instead. So on our device there are parititons chuncks of data of varying sizes allocated to hold a small part of the code that runs our phone. from ramdisk to the radio. The issue on its surface, we dont know how that partition table lines up with a different device.(which the partition table can and most likely is, completely different) and because winodws 8 is closed source we dont know how it boots, or how to edit the imstaller to ensure the os gets copied over the correct partitions. if porting were as easying as just flashing what ever you want and then changing some things to tweak it i'm sure you'd see hundreds of ports in a day or two. Unforntatley it really kinda sucks

The partitions are the biggest problem. We could in theory also boot from the SD card and as a result bypass all the android stuff and get it dual-booting but first we need to know how we can boot windows

Nitro_123 said:
@trevd Do you have anything to say about this ?
Click to expand...
Click to collapse
Hi There
I've not got a device in my hands yet to be able to give a proper device focused opinion on this.
but since you ask, I will say It really all depends on the bootloader setup on the device and how accessible that is, it could well be a proprietary Samsung Design in which case I wouldn't want to "mess" with it unless you had a JTag handy for when s**t goes wrong, otherwise you'll be holding a very expensive brick.
Even without bootloader access theoretically you could create a 3rd stage bootloader ( possibly Grub2/uboot ) which sits in place of the kernel in the boot image ( or recovery image ) , this would give the Option to load android or chainload into the windows boot manager, this is how things are done on classic x86.
If you have to go with a 3rd Stage Loader then the first steps is to get your own code running instead of the Standard Kernel Initialization inside an android boot image, There's all sorts of fun to be had after that as basically you'd need to place things in memory where the Kernel or the Boot Manager is expecting to find them amongst many other things.
Standard Windows 7/8 Installations setup a "hidden ( not assigned a drive letter in windows) " 100MB NTFS partition which contains the bootmgr.exe ( TRIVIA : boot manager replaced NT LOADER ( NTLDR ) which was used by Windows XP ). The boot configuration datafile ( BCD ) contains the settings for loading the actual operating system.
I wouldn't be too concerned about the closed source nature of Windows as there's still plenty of folks doing some absolutely bonkers **** with Windows/Windows Booting. Check out http://reboot.pro if you want to see some of that. My favourite is the 10MB WindowsXP that boots cmd.exe and nothing else LOL WAT!?! . I'm not saying you'll find the answers there but I'd consider it the "state of the art" when booting windows in unusual ways.
Without getting too far ahead, if you did get it booting then it appears the Asus Memo Pad FHD 10 which is a windows 8 device has the same SOC so I would expect there to be driver support already present ( or available ).
Additionally I've not even considered UEFI and how that would affect the whole scenario as I've not delved into the UEFI chaos yet.
Personally I've not used Windows in anger for a couple of years and I've only booted Windows 8 in VM's just to have a look, so my "WindowsFu" is getting a little rusty.
In Summary : Technically Possible ( anything is possible ) - All depends on the bootloader and how much you want it! and to paraphrase @wranglerray "If it was easy, everyone would be doing it"
Trevd

@trevd @wranglerray Thanks so much for the input
This shouldn't really be too hard to do for an experienced dev IMO but I don't have mcuh experience with all this stuff
The stuff that has been done to the HD2 was a lot harder I think but Cotulla still managed to make a custom bootloader and boot WP7 things like that
Thanks again for the comments

@wranglerray @trevd
http://forum.xda-developers.com/showthread.php?t=2540480
Please read the above link
basically we can now understand what the partitions are and what they do
Is it really that hard to make some kind of a zip file that can be flashed in recovery to boot the windows 8 bootloader ?
Why can't we just install an image of windows 8 to the SD card and boot off it ?
What do I need to know in order to understand and try to make this work ? Since no one is developing for the tab 3 10.1 I thought I'd give it a try

Nitro_123 said:
@wranglerray @trevd
http://forum.xda-developers.com/showthread.php?t=2540480
Please read the above link
basically we can now understand what the partitions are and what they do
Is it really that hard to make some kind of a zip file that can be flashed in recovery to boot the windows 8 bootloader ?
Why can't we just install an image of windows 8 to the SD card and boot off it ?
What do I need to know in order to understand and try to make this work ? Since no one is developing for the tab 3 10.1 I thought I'd give it a try
Click to expand...
Click to collapse
As a newbee I will guess:
Windows can take a bigger effort.
Runing Linux natively, easier. Android drivers should be already Linux Compatible. Tweeking them under Linux I do not know. My best guess is looking how to make grub to run first for dual booting. Or even better, Create a partition on external SD forl Linux, To be safe on TWRP recovery add a bottom to boot Linux or even esier re-use one temporary to test posibility.
Good Luck.

dale_para_bajo said:
As a newbee I will guess:
Windows can take a bigger effort.
Runing Linux natively, easier. Android drivers should be already Linux Compatible. Tweeking them under Linux I do not know. My best guess is looking how to make grub to run first for dual booting. Or even better, Create a partition on external SD forl Linux, To be safe on TWRP recovery add a bottom to boot Linux or even esier re-use one temporary to test posibility.
Good Luck.
Click to expand...
Click to collapse
@dale_para_bajo EXACTLY my friend. You stole the words right out of my mouth
Objective: Get Linux booting. SD card way is better.

Any updates on this?

SharpnShiny said:
Any updates on this?
Click to expand...
Click to collapse
It will never happen, the firmware isn't compatible.

calden74 said:
It will never happen, the firmware isn't compatible.
Click to expand...
Click to collapse
Yeah I've looked a bit more into it since, I think the best chance was Windows RT, and that isn't downloadable I believe, so that's it. Thanks for the reply though.

SharpnShiny said:
Yeah I've looked a bit more into it since, I think the best chance was Windows RT, and that isn't downloadable I believe, so that's it. Thanks for the reply though.
Click to expand...
Click to collapse
Even if Windows RT aka an ARM optimized ISO, was downloadable, it COULD NOT be used on Tab 3 10.1
Because this Tab doesn't have an ARM CPU, it have a x86 (32Bits) CPU. So better get a x86 ISO. I also got the same idea (like many other Tab 3 10.1 users). But the dream is NOT going anywhere. Also, Android apps are honestly BAD OPTIMIZED for this CPU ! That's why the Tab lags.
I sold mine and have bought a Tab 7.7 w/ SuperAmoled HD Screen but I broke its screen and can't now find any replacement in my region
Our best chance would be:
Ability of instally Windows 8 into a single .IMG file like Windows XP has been installed !
However, QEMU and KVM refuses to install Windows 8 into a VM idk why !
The RAM of the Tab is also a bit low to run Windows 8 inside Android.
If only a Great Dev could port or create "The Multi-boot bootloader" for Tab 3 10.1 as done on Nexus 7, then I won't waste my money buying a Windows 8 Tablet again since I would manage to install Windows 8 natively, whatever happened !
Sent from my roomate's computer

Can this work?
trevd said:
Hi There
I've not got a device in my hands yet to be able to give a proper device focused opinion on this.
but since you ask, I will say It really all depends on the bootloader setup on the device and how accessible that is, it could well be a proprietary Samsung Design in which case I wouldn't want to "mess" with it unless you had a JTag handy for when s**t goes wrong, otherwise you'll be holding a very expensive brick.
Even without bootloader access theoretically you could create a 3rd stage bootloader ( possibly Grub2/uboot ) which sits in place of the kernel in the boot image ( or recovery image ) , this would give the Option to load android or chainload into the windows boot manager, this is how things are done on classic x86.
If you have to go with a 3rd Stage Loader then the first steps is to get your own code running instead of the Standard Kernel Initialization inside an android boot image, There's all sorts of fun to be had after that as basically you'd need to place things in memory where the Kernel or the Boot Manager is expecting to find them amongst many other things.
Standard Windows 7/8 Installations setup a "hidden ( not assigned a drive letter in windows) "* 100MB NTFS partition which contains the bootmgr.exe ( TRIVIA : boot manager replaced NT LOADER (* NTLDR ) which was used by Windows XP ). The boot configuration datafile ( BCD )* contains the settings for loading the actual operating system.
I wouldn't be too concerned about the closed source nature of Windows as there's still plenty of folks doing some absolutely bonkers **** with Windows/Windows Booting. Check out httpdouble slash)reboot(dot)pro if you want to see some of that. My favourite is the 10MB WindowsXP that boots cmd.exe and nothing else LOL WAT!?! . I'm not saying you'll find the answers there but I'd consider it the "state of the art" when booting windows in unusual ways.
Without getting too far ahead, if you did get it booting then it appears the Asus Memo Pad FHD 10 which is a windows 8 device has the same SOC so I would expect there to be driver support already present ( or available ).
Additionally I've not even considered UEFI and how that would affect the whole scenario as I've not delved into the UEFI chaos yet.
Personally I've not used Windows in anger for a couple of years and I've only booted Windows 8 in VM's just to have a look, so my "WindowsFu" is getting a little rusty.
In Summary : Technically Possible ( anything is possible ) - All depends on the bootloader and how much you want it! and to paraphrase** @wranglerray "If it was easy, everyone would be doing it"
Trevd
Click to expand...
Click to collapse
I am new to the forum but not windows and android though not advanced but do you think that getting those files in the 100mb partition and making an ext2 image of them with slight modifications to fit in the architecture and flash the image as a recovery image?
or perhaps we could use rom manager and by creating a virtual rom composing of windows and boot them via the rom manager tool.
or perhaps we could use grub or a similar tool to boot into an image file or sdcard with windows installed on it and flash the grub files onto the recovery partition but some one with advanced info please confirm all these possibilities!
________________________________________________________________________________________
Hit thanks if I helped, its not that tough

Go ahead guys !
This thread is becoming IRRELEVANT !
Tab 3 was made to run Android (and possibly Ubuntu since Android is a mobile version of Linux) but NOT Windows !
So just use Android or Nothing.
Sent from my roomate's computer

yes but
Nonta72 said:
Go ahead guys !
This thread is becoming IRRELEVANT !
Tab 3 was made to run Android (and possibly Ubuntu since Android is a mobile version of Linux) but NOT Windows !
So just use Android or Nothing.
Sent from my roomate's computer
Click to expand...
Click to collapse
Yes, but since both Windows and any x86 Linux are designed for the same architecture, shouldn't we be able to boot Windows?

glorified sd card
Dani515 said:
Yes, but since both Windows and any x86 Linux are designed for the same architecture, shouldn't we be able to boot Windows?
Click to expand...
Click to collapse
i think it's possible
check this out starting at angel_666's post #18
http://forum.xda-developers.com/showthread.php?t=2589370&page=2
finding out where the flag checking starts and finishes would probably make the third stage boot
more realizeable. i directly flashed both grub and then plop to recovery block and got nowhere,
so it's mmcblk0boot0 or mmcblk0boot1, i haven't found anything in param===>/dev/block/mmcblk0p16 yet
and if p5210 has the little kernel burnt onto the chip setup, from my understanding of what i've
read it's a really basic/small/simple setup so even if the flag was there and unchangeable we should
still be able to get past it somewhere else, right?

Really ?
Dani515 said:
Yes, but since both Windows and any x86 Linux are designed for the same architecture, shouldn't we be able to boot Windows?
Click to expand...
Click to collapse
I firstly got this idea and have posted here on XDA about it :good:
Look at this thread http://forum.xda-developers.com/showthread.php?t=2682603
However, mine was about running Windows 8 inside Android
Sent from my roomate's computer

Done already?
Hello,
I have found this thread: http://forum.xda-developers.com/showthread.php?t=2070139
If you read further, you can find almost complete solution for archlinux natively on Note 10.1. WIth multiple fixes/scripts. Any reason why it cannot be done on tab3 10.1? I'm asking because I might try to compile proper kernel and prepare some distribution as tablet provides power that ends up completely wasted by android.