How to upgrade iPAQ 512 Radio? - Non-Touchscreen Windows Mobile Other

Hi.
Current I'm using HP iPAQ 512, which ROM: 1.09.00_CHS_WWE, Bootloader 0.76.00, Radio(GSM) firmware 1.020.
I've tried some SPL from xda forum which none of them work.. When this step can't get thru, I can't perform next step flash the Radio Rom to ver 1.4x/1.5...
Anyone can help?

Related

\windows\autoconfig.exe does not exist

Hello , I am owner of imate kjam unlocked phone.
My IPL / SPL ver is 2.16.
MY GSM ver is 02.07.10.
My OS ver is2.16.9.1.
I cooked the Crossbow_Reloaded_1.7_Final using core pro.
It completed 100% ok but when i restart my phone the OS its the same.
What i am doing wrong ?
I followed all the instructions step by step without having any problem.The only error i get its when the phone starts up after the upgrade when its installed the programs i get the error \windows\autoconfig.exe does not exist.
Please help me.
Thanks
i had the same problem any ideas?
Your Phone is CIDunlocked. You need to be CIDunlocked b4 you can upload the Rom Properly

ROM Upgrade

I am using XDA mini S with WM5, IPL 2.21, SPL 2.21... How can I upgrade it to WM6. I have already downloaded several files but I dont know what to do with those files. example I have downloaded the Windows mobile 6 Pro by ANTC, it includes ROM Update utility, does that mean than whwn I run the utility, my OS ROM will be WM6?
bart_zila said:
I am using XDA mini S with WM5, IPL 2.21, SPL 2.21... How can I upgrade it to WM6. I have already downloaded several files but I dont know what to do with those files. example I have downloaded the Windows mobile 6 Pro by ANTC, it includes ROM Update utility, does that mean than whwn I run the utility, my OS ROM will be WM6?
Click to expand...
Click to collapse
You need to read and learn the process. Start here and it will answer all of your questions.
http://forum.xda-developers.com/showthread.php?t=298613

ROM update horrors - help please

hi one and all.... my xda II mini was being upgraded to the o2 1.12 rom and then halfway through, it went into bootloader mode and the pc stopped recognizing the device. Now, every time i try and reset the device, it installs the extended rom files and after 5 minutes, goes into bootloader mode. it also goes into bootloader mode on soft-reset. Can anyone help?
by the way, my current rom and radio versions are 1.01
as far as i known ROM 1.12 is for O2 Mini Black Limited Edition .....
If Your Device Not Limited Edition It Can't Upgradeable to 1.12 ROM ....
The Latest ROM For Your Device 1.11 .....
Or just install any Magician rom version 1.13. But before you do that, copy everything out from the extended rom first.
To make you device an O2 device, you need to install the After_Sales_Service_100121.sa.CAB (from 1.11 rom). After that, you can install any O2 application you want.
i can't upgrade my rom though; the 1.13 rom (t-mobile uk) doesn't work, and when i try to upgrade using that, it gives me some error - re the rom update wasn't designed for my device.... so i am stuck to using it without turning it off, else the thing just runs into botloader mode... whish is quite irritating... i've even tried using ma_upgrade_noid.exe from toomuchdogfur's guide but it doesn't work. nothing seems to work....

9100 G3 ipl/spl downgrade.

Hi all.
I was trying to upgrade my 9100 to TNT4 (WM6).
My qtek came with the greek GSM 02.07.10 / OS 2.17.7.2 / GR 2.0.9 versions.
I managed to install the TNT4 (office/Voip/VC).After that i installed the 3.0.8 IPL/SPL.That was my mistake!!!!
When i tryied to install the pro version of TNT4 (HUGE WORK mate!!!!!) the phone stopped flashing and i started the repair procedure.When it was done i had the Wizard Love disto which i had installed before the TNT4.
Now i only can install the Buttons distro successfully.Ipl can be downgraded to 1.0.5 using the Mini-s rom but not the SPL.
The phone is not bricked but is there anyway to bypass this problem ?
ok now
Finaly i found a solution.
I managed to upgrade the OS to TNT4 pro rom using the shelltool
http://forum.xda-developers.com/showthread.php?t=293480
Firts i returned the phone to its original OS (2.17.7.102) and after that i installed the TNT4 rom......

Flash BlackDiamond 3.1 Touch from Faria Crowbow Rom

hi... im a qtek9100 user here and flashed to Faria Crossbow rom almost 1 yr ago. Recently i plan to flash to Diamond 3.1 Touch rom....And im facing some problem here.
_________________________________________________________________
This is the step for flash new rom. thx to vippie
0. First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4. Go to step G3.1 if you got a G3 and G4.1 if G4.
G3.1 Does you're device start normally (yes) or is it stuck on the three-colored bootloader screen (no)? YES... go to step G3.5, NO go to step G3.2
G3.2 Turn off you're device totaly. Remove the SD card and disconnect the USB cable from you're device. Turn on the device while holding the camera button. You will get into bootloader mode (3 colored screen). Connect the USB cable to the computer and you will see USB at the bottom of your screen above the left softkey (Activesync will not connect in bootloader mode, but you can flash from this screen!). If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.5 Is your device CID-unlocked (note: it's not the same as SIM-unlocked!)? YES... go to step G3.7, NO OR DON'T KNOW go to step G3.6.
G3.6 Follow this great thread by Dr Puttingham: The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards. Don't skip step 17! Flash the T-Mobile 2.26 Rom! Go to step G3.8 if you got the T-Mobile rom with IPL/SPL 2.26 on your device after doing this.
NOTE: Some people seem to have problem with flashing the button rom in this step (stops at 98% with error 302). Replace button_rom with Xda_MiniS_LaunchROM_v154102 and follow the rest of the steps normally when this happens!
G3.7 Download T-Mobile 2.26 rom and flash it to your device! Done? Go to step G3.8.
G3.8 You're reade to flash the AKU2, AKU3, WM6 rom of you're choise! It wasn't that hard, was it? If you still got an older OS version after flashing then you're not CID-unlocked! Go back to start!
_________________________________________________________________
My rom info:
ROM version: 2.18.0.0 WWE
ROM date: 2/14/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: Fario V5.0
I need some answer for some problem.
1) Since my device already CID-unlocked before, is that i need to redo again or i can jump to G3.7 step??
2) Is that i need to download T-mobile 2.26 rom and flash it to my device? i hv done this when i flash to Faria CrossBow rom lastime. Is that i need to redo again or i can jump to G3.8 step??
3) If i dont have problem for the question 1 and 2, is that i can flash to Diamond 3.1 rom now? or i need other step to do it
Hope some pro can give me a help. thx
Flash to Tmobile 2.26, then Blackdiamond. It appears you are already unlocked. BTW BlackDiamond ROM is great!

Categories

Resources