9100 G3 ipl/spl downgrade. - 8125, K-JAM, P4300, MDA Vario ROM Development

Hi all.
I was trying to upgrade my 9100 to TNT4 (WM6).
My qtek came with the greek GSM 02.07.10 / OS 2.17.7.2 / GR 2.0.9 versions.
I managed to install the TNT4 (office/Voip/VC).After that i installed the 3.0.8 IPL/SPL.That was my mistake!!!!
When i tryied to install the pro version of TNT4 (HUGE WORK mate!!!!!) the phone stopped flashing and i started the repair procedure.When it was done i had the Wizard Love disto which i had installed before the TNT4.
Now i only can install the Buttons distro successfully.Ipl can be downgraded to 1.0.5 using the Mini-s rom but not the SPL.
The phone is not bricked but is there anyway to bypass this problem ?

ok now
Finaly i found a solution.
I managed to upgrade the OS to TNT4 pro rom using the shelltool
http://forum.xda-developers.com/showthread.php?t=293480
Firts i returned the phone to its original OS (2.17.7.102) and after that i installed the TNT4 rom......

Related

Wizard rom on Prophet

Hi all
Is it possible to use a wizard rom on a Prophet ?
I want a Danish rom for my Prophet, and it is impossible to get.
For the wizard there is several Danish rom here.
The processor and most hardware should be the same on those two devices (exept keyboard of course), so why don't use a Wizard rom on a Prophet.
If it is impossible to do this, can I edit the rom in a Prophet and make the translation my self in the rom ? Is there anybody that can guide me in the right direction ?
Best regards
Kina500
DO NOT Try this, you might BRICK your device.....
Hardware are same to some degree but not exactly..
Hi again
Is there somebody who can guideline me translate the english firmware ?
BR
Kina500
Hi,
After some searching i got a little experience in upgrading my Neo by reading/following the tutorial by Risidoro in Wizard Forum.
(U can search for--'How-to install any 2.x ROM in a CID-Locked G3 or G4 Wizard.')
With this info/tools i tryied many combination of OS,GSM,EXTRom,HTC and Splash except ipl/spl (as of now i dont want to touch and stuck in it and even i dont know whether my Neo is unlocked or not. my ipl/spl: 2.15.0001) successfully.
I suggest every confusing newbee to follow that tutorial and do upgrade but do not touch ipl/spl they dont want a brick.
At present im happy with Jesterz-r1 rom, however i exluded spl part from his rom.
To top the enthu, i decided to install the Wizard Rom on my Prophet, i just use Risidoro's RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4.exe for Wizard and excluded ipl/spl as usual, reform nk.nbf file and used Prophet's RUU
to flash this rom. It completed full installation successfully, device restarted successfully up to HTC logo and after that Bootloader started and could not proceed further.
It was sad to come back to Jesterz-r1 rom now again.
Failure might be because of conflict btwn my maintained ipl/spl(2.15.0001) with OS rom of Wizard
Im guessing it,
as HTC Logo appeared due to ipl
and spl could not proceed( may be wizard os rom require higher spl)
Whetever happen, it was a enjoying process.May someone get success in future.
desbloquear Qtek s200
boas gostaria de saber como e q poderei desbloquear um qtek s200. cumprimentos

\windows\autoconfig.exe does not exist

Hello , I am owner of imate kjam unlocked phone.
My IPL / SPL ver is 2.16.
MY GSM ver is 02.07.10.
My OS ver is2.16.9.1.
I cooked the Crossbow_Reloaded_1.7_Final using core pro.
It completed 100% ok but when i restart my phone the OS its the same.
What i am doing wrong ?
I followed all the instructions step by step without having any problem.The only error i get its when the phone starts up after the upgrade when its installed the programs i get the error \windows\autoconfig.exe does not exist.
Please help me.
Thanks
i had the same problem any ideas?
Your Phone is CIDunlocked. You need to be CIDunlocked b4 you can upload the Rom Properly

Problem in upgrading to PDAViet 4.0.0.0.6 for Prophet G4

Dear all,
I am having O2 Neo G4.
I am have a problem in upgrading to PDAViet 4.0.0.0.6.
Previously i have install PDAVeit 4.0.0.0.5b while trying to upgrade to PDAViet 4.0.0.0.6 .
What i have done is i flashed with PDAV_temp after that started the PDAViet 4.0.0.0.6 in (second step)upgrade process its gave error: ITwrite disc error.
I reapet the process sevral time but no luck, even i tried to update with sevral other version on WM6 (fantastics b4/4.0.0.0.5/4.0.0.0.se )
but its always giving the same error ITwrite disc.
Can any one please help me to resovle the problem.
Thanks v v much for you help.
I think that because your source folder is too long words, example D:\ÏmpOrTÅNcÎA\Dokumennya Chaerul\Chaerul Poenya\All About PDA\Update ROM Tools\ProphetTouchVII
you can try to put the update file on the front drive
Hope that help....

i think my treo 750 is dead

Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
You may have corrupted your DOC, you may need to use mtty to reformat it. Do some searching on how to do it.
Or try to use T750URT.exe to restore it, it comes with the Treo desktop updater.
similar problem
Hey guys,
After I flashed a WM6.5 costum ROM in my treo750 it works fine...until 4 hour after...the display just stay black. It´s on, but black!!
I´ve tryed reset, hard reset and force to reflashed to an original WM5.0 without success.
Does anyone know what is happening with my phone??
Thanks

[Q] Windows Mobile 6.5 Rom by PDAVIET For JAMin

Hi..
I m the latest user to get into upgrading.. I have had a JAMin since March 2006 but never thot of updating it till now... (kinda sounds lame bt been bz with other stuff) .. anyhow.. I have some how managed to achieve the following in the past 5 days...
Ugrade my SPL from 1.0.0.0 to 2.13.x.x
Upgrade my SPL from 2.13.x to 2.20.x
Upgrade my WM 5 to WM 6 (by PDAVIET 4.0.0.3a)
Now I m stuck at this coz i apparently wanted to update my Jamin to Windows Mobile 6.5 and i really seem to like the roms by PDAVIET.. I have downloaded many 6.5 roms (e.g. bikertbi) but once i download the file and unzip it... i m left with 2 files namely.. prophet 6 and nk.nbf
now the problem comes as i try to install using prophet 6 tool.. (p.s. i have windows 7 and xp virtual machine installed which work quite brilliantly to upgrade/update my jamin rom ) the system tries to do hardspl and my jamin goes white.. and when it starts the flashing tool ... the RUU cannot find my pda ... then i switch to updating the rom using the RUU_NV_G3 update facility (my pda is G3).. and i can install the rom .. but after installing the pda restarts and its stuck in bootloader screen (3 colors) ..then i have to revert back to wm 5 (stable one) now i have done this abt 7 times and still the same screen shows up..
what i did like abt pdaviet rom was the installing tool which did wonderfully well.. (upgrade.bat file) and now i have been searching this forum (or at least trying to locate) for the windows mobile 6.5 rom by PDAVIET for JAMin/Prophet but i m unable to do so..
so i need help in installing the bikertibi rom or pls provide the download link for pdaviet wm 6.5 rom for jamin/prophet.
thnks

Categories

Resources