No SIM contacts showing.. How to ? - JAMin, XDA Neo, S200 Software Upgrading

Hey !
I have just flashed to a WM6 rom on my prophet, but no none of my sim card contacts are showing.. Anyone knows how to enable them to show ? I think there is a registery entry there needs to be changed to let them show..
~D

Da9L said:
Hey !
I have just flashed to a WM6 rom on my prophet, but no none of my sim card contacts are showing.. Anyone knows how to enable them to show ? I think there is a registery entry there needs to be changed to let them show..
~D
Click to expand...
Click to collapse
Hi just add the following in the registry:
HKEY_CURRENT_USER\ControlPanel\Phone
ShowSIM=dword:1

Da9L said:
Hey !
I have just flashed to a WM6 rom on my prophet, but no none of my sim card contacts are showing.. Anyone knows how to enable them to show ? I think there is a registery entry there needs to be changed to let them show..
~D
Click to expand...
Click to collapse
omg this question was asked hundreds of times on this forum
after flash WM6 you HAVE TO hardreset your device
cheers

Related

Boot from SD card

Hello all,
Is it possible to put any ROMs on an SD, make it bootable, and boot from the SD?
thank for your answers.
Does anyone knows the solution?
gandhars said:
Hello all,
Is it possible to put any ROMs on an SD, make it bootable, and boot from the SD?
thank for your answers.
Click to expand...
Click to collapse
Hi all.
I am interesting too. Its possible?
dvc said:
Hi all.
I am interesting too. Its possible?
Click to expand...
Click to collapse
Hi,
Please someone help, I am interested TOOOOOOOOOOOOOOOOO.
I mistakenly installed a G4 Rom in my G3 device, now its only showing Three color screen & not accepting any ROM.
Please help....................
flash with the NoVendor-ID Dopod Rom from the FTP...
To boot from a program, create a folder entitled "MCSTART" which contain a programme call "AUTORUN.EXE". When you insert card, windows will copy executable and launch it with parameter "install" (and when you remove it, windows relaunch app with "unsinstall parameter")
So maybe you can create an executable that launch ROM update
rodigezstyle said:
flash with the NoVendor-ID Dopod Rom from the FTP...
Click to expand...
Click to collapse
Tried but not helping.......

[O² XDA Neo] - Ext. Rom / CABs / Unlock etc.

aWizard can unlock CID and RAPI a XDA Neo (Prophet/G4) device?
If not, how else?
If i make my Ext. Rom shown and edit able and delete some CABs, then:
-they are disabled after restart?
-they are deleted for ever, also after hard reset?
Is there a way to completly delete the O2 Themes, also the Phone Skin and Splash Screen?
If there a way to complety delte the GPRS? like:
- delte a CAB or anything else?
much thx 4 help
s0urce
s0urce said:
aWizard can unlock CID and RAPI a XDA Neo (Prophet/G4) device?
If not, how else?
Click to expand...
Click to collapse
No you can't and there is no way doing this as of now for a G4.
If i make my Ext. Rom shown and edit able and delete some CABs, then:
-they are disabled after restart?
Click to expand...
Click to collapse
The Ext. Rom provides extra software that usually gets installed by default once a hardware reset has been done. Deleting CAB's in the Ext. Rom (whether it's possible is another question) has no effect on the Prophet at all. If software from Ext. Rom got installed already then they stay installed until you uninstall it or do a hardware reset.
-they are deleted for ever, also after hard reset?
Click to expand...
Click to collapse
No.
Is there a way to completly delete the O2 Themes, also the Phone Skin and Splash Screen?
If there a way to complety delte the GPRS? like:
- delte a CAB or anything else?
Click to expand...
Click to collapse
You don't want to do any of that unless you know what you are doing.
Spatzm, thx so far ... but:
-how can i edit my ext rom then? when not with deleting the CABs?
-and i saw some threads they said, u can unlock a G4:
• one said with the aWizard
• and some others told of variouse tools to do that
they are all wrong?
... btw. i ask this, because i wanted to backup my XDA with aWizard before i change anything, but to before backup, the aWizard Tools tell i have to unlock, and without i only can backup the ext rom.

NBD help

Now I looked everywhere to see if there was a solution to my problem but couldn't find any. But I've flashed NBD 8 to my 8125 CID locked. Everything seems to be working fine except that the contacts won't work. Is there a way to fix this, or does my CID HAVE to be unlocked for it to work? Thanx! =)
what is wrong with your contacts? Are they not showing up?
try this to Hide/Show SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show
Im locked and contacts are showing up fine in NBD 8. Might be a stupid question but did you check your sync settings to be sure your syncing your contacts? Might want to reflash if thats not the case, be sure to use wizard love or factory rom first.
did you restore your contacts??
if yes, try to rename pim file which located on 'My Device' using your file explorer to any name, then reset the device, then check if contacts app opened or not, if opened so the problem with the way you used to restore the contacts, note: this way will erase your contacts.
Are you restoring backup of WM5 to WM6 with SPB Backup or other program? WM5 contacts data are not compatible with WM6 (You can backup using ActiveSync or Pim Packup instead)
hey guys i hard reseted my device while i had NBD 8 on it and now it is stuck on a screen with "NBD" on it. can anyone help???
Try removing your memory card. Insert it after restarting is complete.
yoz
this may be a stupid question but did you try to add manually with sim manager?
Could be a bad flash, just hard reset and see if it fixes it, happened to me before after flashing. Nowadays, I double check if my contacts open correctly andt hen start customizing..
Trying NBD8.0 now... thanks to Zoki...

camera not working in WM6

hello
i installed windows mobile 6 on my Jasjar but the problem is the camera is not working.
when i try to launch it gives me "Not enough physical memory currently available to run this application!"
how can i fix the problem
one more thing. i want a program where i can enable and edit the registery keys in Jasjar
thx alot !!
Hi guys !
Same problem here since I upgraded my uni with WM6.
Please help !
same here then it reboots
o2xdaexec said:
same here then it reboots
Click to expand...
Click to collapse
Hi, try this version of the Camera app!!
Just copy over the one in "windows" folder.
Bye,
Paulo
hey
i cant copy it or overwrite it to the windows folder. it gives me as its blocked !
gha55an said:
hey
i cant copy it or overwrite it to the windows folder. it gives me as its blocked !
Click to expand...
Click to collapse
Hi,
If I'm not wrong, that camera app version can be executed outside of the "windows" folder !!
Anyway try using Resco Explorer to attempt to overwrite it...
Bye,
Paulo
Hi Augustopaulo,
Thanks for your help, I installed the soft and now I get "unable to allocate camera buffer" then it ask for reboot.
Any idea someone ? Please help, it sucks to be without camera.
PS : thanks to all developers and people helping you are great.
if you open the camera then go to setting you will notice the sizes,2mp is there too try changing the size to a lower one see what that does.i get the same error

How can I disable certificate signing (WM6.1)?

As title, help appreciated.
Mitch,
Mitch92uK said:
As title, help appreciated.
Mitch,
Click to expand...
Click to collapse
I think this is what you're referring to: disabling the security warning when installing cabs?
Open DiamondTweak and scroll down to 10.1: Security. Change the Not-certified Warning thing in 10.1 to "Disabled (Advised)".
If you don't have DiamondTweak, just do a search for it and install it. Great program to have!
Diamond tweak certificate problem
But, i can't install diamond tweak due to certificate problem. Can thic be done through registry editor
rvojvodic said:
But, i can't install diamond tweak due to certificate problem. Can thic be done through registry editor
Click to expand...
Click to collapse
First, I'll post some information that'll help you understand the situation: see this post, and then read several below it.
Then, after doing that, install the attached cab, and it should take care of it for you .
regedit not opening! certificate problem!
Captain_Throwback: i am not able to change the registry values because, i am not able to open regedit because of the certificate problem! thanks in advance
Solved
hi, just in case this is helpful to anybody, i hard-reset the handset and i am able to install all apps again.. no certificate signatures required
volug said:
hi, just in case this is helpful to anybody, i hard-reset the handset and i am able to install all apps again.. no certificate signatures required
Click to expand...
Click to collapse
Today I have same problem with my HTC Touch Pro RAPH100 orig. ROM and same pocces as I qouted help me too. But HARD-RESET is not good solve i think. Some other solving process help for other people and maybe for me som other day?

Categories

Resources