Related
I got my Triumph and it will not charge no matter where I have plugged it in or fiddled with the charger. It does not matter whether it is on or off. I have been using the wall charger that's included and I have tried USB through my computer. Before I go to the hassle of sending my triumph back I wanted to see if there is a solution. Thanks in advance.
The first one I got did this sometimes as well. I took it back and swapped it.
Jumpstart
My triumph would not even turn on strait out of the box. I had to "Jumpstart" the battery, here is a link on how to do it. thejosea.com/2011/02/jump-start-your-droid-when-no-wall.html (Sorry i cant post links yet, gonna have to copy paste)
You pretty much have to charge the battery by its self outside of the phone. Once you do this let it sit charging for about 20 minutes then try to charge it through the phone.
You should only have to do this once.
It seems like the batteries are not being shipped charged and they run "Dry".
You MIGHT want to try a different USB cable.
I'm using my Nook Color adapter(1A) and a generic USB cord which works fine, however one time I accidentally used my Optimus V cable and it would NOT charge while the MT was up and running, however it WOULD charge IF I powered down the MT...
I haven't even tried the cable that came with MT yet... nor have I tried charging via a USB port on my nb, but I imagine that would be REALLY sssslllloooowwwww....
I exchanged my device for a new one, and with my new phone, when plugged in, the lock screen no longer shows "Chargin" with the %. Any ideas how to bring it back?
It only shows that if you're on an AC charge. If you're on USB it won't.
I've tried on 2 different AC chargers and it still doesn't display
Same cord? The AC pins have to be shorted or it won't go into AC charge mode. I have a couple of USB cords that work fine for connections to the computer but will not go into AC mode (the USB cords that come with the Optimus are known for doing this on other phones, incidentally....)
It'll charge without AC mode being "engaged" but at the 500ma rate instead of the 1A rate, so it will take a lot longer.
the answer is simple.....due to crappy crappy design of micro usb the charge port actually comes un-soldered from the board and obviously it no longer will charge nor will usb work!!! now before you ramble on with how do i know i wondered why mine wouldn't worked i opened the phone and notice the micro usb pins were not attached anymore....i have sent this in to Motorola which gives you a 2 year warranty instead of virgin mobiles crap $5 a month insurence then you still have to pay like $100 to get a new phone!!! so i will post how everything goes so far i know the repair center is in McAllen TX and they give you a free 2day shipping label valued at $100 to send in the phone!
You might want to try plugging it into a wall (not pc) and leave it for 20 minutes. Mine ran completely dry one time and it wouldn't display nothing until it charged for a while. If you've already tried this then definitely take it back.
nickmcnamara said:
the answer is simple.....due to crappy crappy design of micro usb the charge port actually comes un-soldered from the board and obviously it no longer will charge nor will usb work!!! now before you ramble on with how do i know i wondered why mine wouldn't worked i opened the phone and notice the micro usb pins were not attached anymore....i have sent this in to Motorola which gives you a 2 year warranty instead of virgin mobiles crap $5 a month insurence then you still have to pay like $100 to get a new phone!!! so i will post how everything goes so far i know the repair center is in McAllen TX and they give you a free 2day shipping label valued at $100 to send in the phone!
Click to expand...
Click to collapse
*update* They are fixing my phone now and i should get it in 5-7 business days no problems they received the phone and started the repair
I had the same problem but different solution.
I too let my phone completely discharge to find that it would not indicate that it was charging or even power on with or without the battery being present, but I "jumped started" my phone. This is a weird technical solution that went as followed in its entirety, meaning, some of these steps might be pointless or useless but I did them and I now have a working resurrected MT in my hands that is charging. This solution is assuming that there is no problem with the micro USB soldering on the main board.
"Jump Starting"
1) Remove the back casing and your MT battery and place both to the side, but keep the battery close by for polarity reference.
2) Have another battery of the same 3.7v that is charged (disregarding mAh).
3) Now here is the fun part and pay CLOSE ATTENTION to POLARITY!!!
-Get two spare wires, preferably of different colors so you can tell the [+] from the [-].
-With the spare 3.7v battery you have, in what ever way you can, connect your spare wires to it, paying close attention to polarity.
-Now that you have your spare battery wired, CORRECTLY connect the wires to the inside connectors of your MT what ever way you can, paying close attention to polarity.
Being [+] connected to [+] and [-] connected to[-]
4) Boot your phone until you know you are at the home/lock screen. Then remove the wires from the MT battery connectors.
5) Use this same battery and connect it to your battery for about 30-60 seconds, paying close attention to polarity. This will give the battery some juice for the system to recognize.
6) Place the battery back in the phone without attempting to turn it on and return the back case to the closed position.
7) Now connect your MT to a powered micro USB cable and see if the red indicator charging light turns on.
-If so then great!
-If not then you may have some other problems
-If yes and no, as in the cable has to set a certain way for it to charge then just keep on reading for that fix as well.
"Loose Connection Fix"
This is how I fixed my loose micro USB cable and it worked for me, but I do not have soldering problems on my main board of my MT so proceed if you think this will help.
1) Your micro USB male side of the cable that plugs into your MT should look something like this (excuse the crude drawing of letters)
{the dots are empty space}
____________
\................... /
\UUUUUU/
2) Get a pair of needle nose pliers and SLIGHTLY pinch/squeeze the center of the male port closed so it looks like this
____...... ____
\.... \...... /.... /
\UUUUUU/
Except not that extremely bent inward, but you get the idea.
This will force the male tongue in the MT charging port to be forced onto the pins inside the micro USB cable for a better connection and thus fixing the loose connection problem
I hope this helps someone, it helped me save my $300 paper weight from actually being a paper weight.
Froxen said:
I too let my phone completely discharge to find that it would not indicate that it was charging or even power on with or without the battery being present, but I "jumped started" my phone. This is a weird technical solution that went as followed in its entirety, meaning, some of these steps might be pointless or useless but I did them and I now have a working resurrected MT in my hands that is charging. This solution is assuming that there is no problem with the micro USB soldering on the main board.
"Jump Starting"
1) Remove the back casing and your MT battery and place both to the side, but keep the battery close by for polarity reference.
2) Have another battery of the same 3.7v that is charged (disregarding mAh).
3) Now here is the fun part and pay CLOSE ATTENTION to POLARITY!!!
-Get two spare wires, preferably of different colors so you can tell the [+] from the [-].
-With the spare 3.7v battery you have, in what ever way you can, connect your spare wires to it, paying close attention to polarity.
-Now that you have your spare battery wired, CORRECTLY connect the wires to the inside connectors of your MT what ever way you can, paying close attention to polarity.
Being [+] connected to [+] and [-] connected to[-]
4) Boot your phone until you know you are at the home/lock screen. Then remove the wires from the MT battery connectors.
5) Use this same battery and connect it to your battery for about 30-60 seconds, paying close attention to polarity. This will give the battery some juice for the system to recognize.
6) Place the battery back in the phone without attempting to turn it on and return the back case to the closed position.
7) Now connect your MT to a powered micro USB cable and see if the red indicator charging light turns on.
-If so then great!
-If not then you may have some other problems
-If yes and no, as in the cable has to set a certain way for it to charge then just keep on reading for that fix as well.
"Loose Connection Fix"
This is how I fixed my loose micro USB cable and it worked for me, but I do not have soldering problems on my main board of my MT so proceed if you think this will help.
1) Your micro USB male side of the cable that plugs into your MT should look something like this (excuse the crude drawing of letters)
{the dots are empty space}
____________
\................... /
\UUUUUU/
2) Get a pair of needle nose pliers and SLIGHTLY pinch/squeeze the center of the male port closed so it looks like this
____...... ____
\.... \...... /.... /
\UUUUUU/
Except not that extremely bent inward, but you get the idea.
This will force the male tongue in the MT charging port to be forced onto the pins inside the micro USB cable for a better connection and thus fixing the loose connection problem
I hope this helps someone, it helped me save my $300 paper weight from actually being a paper weight.
Click to expand...
Click to collapse
I let my battery die down and also did a battery memory reset, then the phone acted bricked.
Then I tried this to revive and it worked!
Thanks for the help here I did this but when I connected the batter to the phone nothing happened. I connected battery to battery let sit for about 90 sec put it in phone and plugged in and the red light is now on!
Thanks!
Well,
add my phone to the list. It started about 2 weeks ago when after completing charge, instead of maintaining trickle charge it just let battery drain. I woke up couple of times in the morning finding the phone's battery on it's last legs. Now it simply refuses to charge by anything but my car charger. Lucky for me (and I thought I would never say it in my life) I have a long commute to work and it allows me to recharge the phone while I enjoy typical traffic delights.
I am going to call Motorola and discuss my options with them. I hate doing this as my phone is long since rooted and running CM7, so I will probably have to revert to factory settings before sending it off and if they decide to exchange I would be running a chance of receiving one with bad GPS.
yes i've had this problem to i have to charge my phone on a Samsung charger no motorola charger will work on my phone.
Sorry, I'm somewhat new here.
I have a Motorola Triumph and it just stopped working. The general idea is that the Micro-USB port was shoved up into the device?
How do you go about contacting Motorola about sending it back to be repaired?
I have delt with this problem SO MUCH, have you tried my battery charging fix yet ? I have the link posted in this section called battery charging fix, Hope this helps you it sucks when your phone won't charge.
Well the problem is that it won't even turn on. I think the battery has some kind of charge but when I hit the power button, it vibrates like it's booting up then stays off.
I don't know that much about phones, but from what I can gather off Google and the various threads on XDA (Great site, by the way!) the general consensus is that it's the micro-usb port.
Granted, I may be wrong, which is a very real possibility. Heh.
Well 2 things, have you replaced your recovery with the clockwork recovery image ? If so try any means nessary to get into recovery, My old Triumph would NOT charge with any motorola charger, I belive this is a defect with the triumph. You might try a powermat of some kind to get enough power to get to recovery & do what my guide says to fix this most pain in the ass problem, Or get another battery & follow the guide. It's worth a shot anyway. otherwise you've got two options replace it or open it up, if you're gonna open it up then get a super fine sautering tip or file one down to needle size, this is how I do precision sautering on circut boards.
No, I had downloaded Clockwork with the intention of installing a 2.3 rom on it, but never got around to it. As for the charger, my Triumph charges with any micro-USB, from my old LG and Samsung chargers to the Motorola charger that came with it. It acts weird though when I plug it into a computer, saying it is connected to a computer, then that it's not, then that it is, then that it's not, repeatedly. I usually just end up turning it off so it won't do that.
I find it weird, though, that now when I try to charge it, the charging light up where the speaker is will not come on, as if it isn't charging. (And I don't think it is charging.)
I've also tried putting it into the "recovery mode". (Like I say, not too knowledgeable about phones yet. Learning experience. ) When I boot it up (into "recovery mode" or "regular" (?) mode) it just vibrates like it should then does nothing.
Edit: It finally did boot into the "recovery mode", but the touch button things at the bottom (menu, home, back, and search) don't do anything, and I cannot get into the menu to do a factory reset.
I don't think it's the battery now? I am more confused then I was when I started, and appreciate any and all help!
anyway to charge this thing up, i flashed cm7, as per thread instructions...i cant do anything now i got the M logo, batt too low in bootloader to sbf...and i cant seem to hit the recovery...least not cwm...i get the triangle one...thats it. anyhelp would be appreciated to fix my paper weight.
borrow a battery from a friend
good reason to have two batteries and keep 2nd one charged and in freezer if storing long term
did you try going in to bootloader with charger or usb connected and press power button to close bootloader to see if it will charge that way?
sometimes I can get cw recovery to boot when i hold camera button when powering up
take apart a charger and attach the red and black to positive and negative on your battery for a half-hour, then sbf. that's what i do.
atrocityg1 said:
anyway to charge this thing up, i flashed cm7, as per thread instructions...i cant do anything now i got the M logo, batt too low in bootloader to sbf...and i cant seem to hit the recovery...least not cwm...i get the triangle one...thats it. anyhelp would be appreciated to fix my paper weight.
Click to expand...
Click to collapse
Are you trying to charge it via pc usb or by the plug socket, as usb doesnt give euogh power out to charge a dead battery. just plug it in to the mains and leave it for about 2 phones (dont even attempt to turn it on)
ok...
can anyone tell me which 2 pins on the batt are neg and pos. also, can i take a old POS usb cable...cut it open and take red and black...or its gotta be micro...cuz if its gotta be micro ima just order me a ext battery charger., i loose more micro usb cables then the trouble is worth thats why i ask lol, anyways yeah i cant get into Clockwork or anything...just stuck at m...no charging.
usb mains
also sorry for double post, but i was using usb mains...and on pc...so im sol i think. thanks though.
ok i figured it out, battery was labeled
ok i c the batt was labeled, i spliced down an extra micro usb cable, pos and neg...for an hour the first time an 3 the second...it wont charge...its weird. i taped the extra two pins over wtih elec, then touched the wire to the red, taped it...and then the black taped it. nothing...any suggestions?
I hate that people are suggesting you charge the battery directly (Thats a surefire way to kill batteries, giving them unregulated voltage from usb). If you need to charge it... twist the wires for power back to how they originally were before you cut it. Then cut the data pairs (typically a green and white wire) then strip the end on the phone side of the micro usb plug. Twist that pair of wires together and it should charge. If it still doesnt than either the charging circuit is damaged, cable is bad or the battery is bad. That is how the factory cables supply power to the phone.
Sounds like a dang good idea
aceoyame said:
I hate that people are suggesting you charge the battery directly (Thats a surefire way to kill batteries, giving them unregulated voltage from usb). If you need to charge it... twist the wires for power back to how they originally were before you cut it. Then cut the data pairs (typically a green and white wire) then strip the end on the phone side of the micro usb plug. Twist that pair of wires together and it should charge. If it still doesnt than either the charging circuit is damaged, cable is bad or the battery is bad. That is how the factory cables supply power to the phone.
Click to expand...
Click to collapse
Would you be able to be a little more specific on that? im experiencing the same issues and would like to try your approach but im afraid to try it without more details. is there some sort of YouTube™ video that i could use?
Hi everyone,
My first post as I haven't been able to find an answer. My Photon Q was probably about 30% charge when I last checked with it on. An hour or 2 later it was a little warm and was off. So I went to charge it using the car charger with 500mah charge rate. I came back about an hour later and the phone was really hot and no charging screen so I unplugged it. The green led light is lit when the phone is plugged in.
I tried holding the power button and volume down button, but it won't boot. If I have the usb charging cable plugged in from a PC or charger adapter when pressing those buttons, the green light will flicker off for a fraction of a second.
I then proceeded to dismantling the phone as I suspect a battery issue and the one in this phone is stupidly non-removable. After taking the back cover off, I tested the battery posts and received 0 volts. I still don't know if the battery caused the drain or if there's a short in the phone. I then took off the inside cover that holds the battery in. A few T5 screws later and the battery was removed. I connected the battery to some AA batteries in series to see if I could get a charge. A few hours later I got it up to 3 volts which held for several hours. So I connected it to a few more AA batteries in series to try and raise the voltage. I got it up to 3.67 volts and the battery is listed at 3.7 volts.
A day later and the voltage is still at 3.67 volts so I put the battery in the phone. I went to try and power it on, but nothing. I then connected it to a usb cord and received the slow flashing red led light a couple times before switching to green. The battery started getting warm again connected to the usb charger. After 20 minutes it was approaching hot so I unplugged the USB. The battery read 3.54 volts. 30 minutes later, 0 volts again.
Does anyone know what the actual voltage range is for this phone, as my old Samsung M320 is also 3.7 volts, but when testing the battery I get 4.10 volts? I heard it's pretty specific on minimum voltage. Any ideas for a temporary battery or way to boot the phone before spending $50 on a replacement battery and then find out there's a short in the phone. Is there another key combination to boot the phone, I'm trying to boot it to at least get my pictures and other data off it.
Thanks a lot in advance
Matt
Not the battery, seems to be an electrical short but where
I bought a new battery for the phone which had a 0 volt charge when I received it. I tried putting it in the phone as is to use the phone charger to charge it, but got nothing. So I charged it using 2, then 3 and then 4 AA batteries in series to get it up to 3.7 volts. I then put the battery in the phone and noticed the 2 large chips and the chip centered above them located by the camera get a little hot. I tried with the charger connected and not connected, but same thing. Power button doesn't turn the phone on. Just the green led lit when the USB power cable is attached. So now it seems there must be a short in the phone. Anyone know where I can look to check for a short, blown resistor or something in this phone? Or at least where the rom chip is located so maybe I can turn it into a usb drive to get my data at the least.
Anyone? I still haven't been able to find a solution. I don't see pins touching, but if some pins are touching in the usb port, would that cause the heat issues when I put a battery in that I charged externally? I do get the green led light when I plug the phone in to charge so figure that means the usb is ok?
Regal's Photon Q said:
Anyone? I still haven't been able to find a solution. I don't see pins touching, but if some pins are touching in the usb port, would that cause the heat issues when I put a battery in that I charged externally? I do get the green led light when I plug the phone in to charge so figure that means the usb is ok?
Click to expand...
Click to collapse
did you try a other charger ? do you have oryginal photon charger ? for me its not a reason of battery
regards
(in situation like that charging with normal usb cable when you plug phone to pc dont charging battery, you need motorola usb service cable to make it work)
niko99 said:
did you try a other charger ? do you have oryginal photon charger ? for me its not a reason of battery
regards
(in situation like that charging with normal usb cable when you plug phone to pc dont charging battery, you need motorola usb service cable to make it work)
Click to expand...
Click to collapse
Yep used the motorola cable that came with the phone (plugged in the wall and just the cable in multiple computers, another motorola house charger (the same as the one that came with the phone), a motorola car charger, and a samsung house charger.
When you say motorola usb service cable, I assume you're not talking about the motorola cable that comes with the phone? What usb service cable are you referring to?
Regal's Photon Q said:
Yep used the motorola cable that came with the phone (plugged in the wall and just the cable in multiple computers, another motorola house charger (the same as the one that came with the phone), a motorola car charger, and a samsung house charger.
When you say motorola usb service cable, I assume you're not talking about the motorola cable that comes with the phone? What usb service cable are you referring to?
Click to expand...
Click to collapse
factory / sevice cable ( i make my own from below tutorial)
http://forum.xda-developers.com/showthread.php?t=1077414
if you buy / make this cable , you will be have posibility to use RDS lite and flesh firmware this also make help (if you have low battery flesh with normal usb cable is not possible )
and second thing... maybe try some car charger ?
I've successfully replaced the battery of the dock with a new one. It was showing some charge 36% instead of 0% and no more tablet draining, but it never charged! So now it's at 9%, red dot blinking, and I don't know how to fix it! Charging sign appears when plugged in and tablet charges trough the dock.
I've tried the cold boot and the trickle charge but I didn't see changes, maybe I've done something wrong?
What more can I do to make it charge again?
I thought it was the charger or the cable but for what I see the 40-pin connector has actually only the 4 pins (the usb signal) so I don't think I need another cable.
bichpm said:
I've successfully replaced the battery of the dock with a new one, but it never charged!
I thought it was the charger or the cable but for what I see the 40-pin connector has actually only the 4 pins (the usb signal) so I don't think I need another cable.
Click to expand...
Click to collapse
I don't believe it is a software issue. It might be a contact issue caused by yourself I think.
Firstly disconnect your tablet from the dock. Connect it with the charger and check if it is going to be charged. If so, your both charger and cable are OK.
Secondly check whether all contacts between the battery and the dock are closed correctly or not. Please follow backwards the sequence you used to taking out the old battery by yourself.
try and charge it with the official charging brick, or at least something that can put out 15V at 1.5A i had the same problem when using my tablet after a long time and only my tablet would get charged not the dock
Yes I'm charging it with the official charger, maybe it got some problems
I don't have a tester at the moment but I got a doubt. Is it possibile that the cable has 2 charging lines one for the tablet and one for the dock? Because I want to buy another charger but maybe it could be not compatible for charging also the dock.
I opened it again last weekend and there was nothing unplugged, everything was good.
Hi, I am a novice in phone repairs though I have successfuly replaced the screen and charging ports on a samsung s6 and note 4.
I am requiring some expert advice on this problem, I was given an XZ from my friend with a cracked screen and charging problem, the charging port became temperamental and failing (at least I think it was that) and eventually wouldn't charge at all. The charging port was handled a bit harshly toward the end, for example the charging cable lifted up and down to try to get a charging response.
Anyway I ordered a screen/digitizer and charging port flex for it, and fitted them, following a guide. Before this, the phone had around 2% charge. After the repair, I switched it back on and conncted the charger, the screen was fine, however there was no response from the charger. The phone then ran flat and eventually ran flat enough to not be able to show the "low charge" symbol when the phone is off. Then after plugging and unplugging the cable (via USB in the pc) it would charge for what seemed a second then stop, the red charging notification light was lighting up. The same happened with a wall charger. I then stripped it back down and back together again. This time there was no response if I remember right, then I connected it to the wall charger and left it for 3 hours or so. I went back to it and it had charged up to 15%.
Now i'm at the point where the phone is working, it's on 90% now, but it charges very slowly, around 60-350 mA per hour on Ampere app. So a full charge is around 12+ hours. This is in the wall socket with a fast charger. Additionally, it takes 10 seconds for the phone to recognise the charger after is is plugged in and that is consistent each time I plug it in. The phone now isn't recognised by my PC via USB, and also won't charge that way also, it just doesn't do anything if I plug it in there. Other than that, the phone works and it holds its charge well.
Any ideas? Thank you.
2 Pics of battery app:
imgur.com/a/YnNtp
pick up an original sony charging cable - no idea why it makes such a difference, but.........
Hi, thanks for the reply, I bought a sony charger but it's still the same, drawing about 50-300 milliamps from wall charger, not recognised by PC and takes 10 secs exactly for the phone to recognise it's being charged. It's just odd how it stopped charging before the "fix", now the new flex lets it charge slowly. Can a battery problem cause this? It still holds its charge well. Maybe this problem is recognisable by some phone repair experts around here? any ideas?
Thanks
Noticed the phone only draws charge from a 3amp charger, anything less isn't recognized. And the power drawn from a 3amp can be 30-1000ma but averages around 300 ma. Can anybody point me to a hardware forum maybe? I can't find any, i guess it need taking to a phone expert but it's gonna end up costing more than its worth with the stuff i have done already.
Aukey Quickcharge 3.0 is working fine. It is cheap too.
I have just purchased a aukey charger, but my XZ seems to be taking longer to charge than the UH20 charger that came with my XZ. Any suggestions guys?
dibdin said:
I have just purchased a aukey charger, but my XZ seems to be taking longer to charge than the UH20 charger that came with my XZ. Any suggestions guys?
Click to expand...
Click to collapse
Buy a UCH20
Sent from my F5321 using XDA-Developers Legacy app
Have you tried cleaning/replacing the charging port itself? As i see, you replaced only the flex cable.
There's probably extremely weak contact somewhere in the charging hardware i think, because you need 3.0 A charger to get any kind of charging response. Weaker current probably gets lost at that 'weak contact'.
Buying new chargers won't fix that if you ask me
I have exactly same problem with you
I am about to buy a new charger, yet I saw your post
At first I thought it was the cable. Then my cable work normal with other phone. So does my charger, it connect perfectly with other phone (xperia xz premium and xiaomi mi5)
It seems that our phoneis the only one who can'y charge normally.
I am quite depressed, also looking for solution. Mind if you share if you have succedeed? Thanks before
---------- Post added at 01:44 AM ---------- Previous post was at 01:25 AM ----------
Try plug in and plug out. My phone sometimes charge a normaxl. But need a lot of effort
Solved
Use the the detect usb in the notification keys before connecting the charger,, this will solve the fast recharging issues
Did you solved problem? I have same issue. Changed battery, usb-flex, no luck
Hi,
I have bought an used XZ.
The owner sold me this phone because he need new battery. I have replaced the old one after a week of test. The old battery works only for 6/10h and drain totally during night even if the phone is turned off. The new one have the same problem. I try to solve with an other battery, and nothing same problem. 12h of standby, after is totally drained. The strange thing is that I have the same battery life even when the phone is turned off, but not only this. If the phone is in 0% he charge without problem. If we have any % of battery I need to connect and disconnect the charger from a wall plug many and many times before he start charging. Phone give me the charge icon for a second and after nothing until I disconnect the charger from a wall plug(I have tested different charger and cable). During my investigation I have found that this phone results every time a little bit hot even if turned off. I have try to disconnect all is possibile, but the heat is from CPU! Now I know that this is the cause of fast discharging in all conditions.
Now I need to know if anyone with a "normal" unit feel the phone heat while turned off and while is on wich temperature have. Mine is every time on 34/35° in standby. Let me know,
thanks
i have same problem . sony xperia xz and sony corp is very very Rubbish
Hi Guys,
I found a way to charge my Xperia XZ with the same loop problem.
Try to push upper volume pad together with power button and plug in the charging cable.
Hold the buttons for 3-5 minutes - you will feel vibrating signals like 3 short and 1 long.
so hold it and then simply leave it for a several minutes and it should start to accept the charge.
Alex Kutikhin
Yes - I had this problem...fixed it by holding in POWER UP and OFF button for 120 seconds.
Do not let go...you will feel vibration (1 short, 3 short). Keep holding for 120 seconds.
Device should now be powered down. Plug in charger cable and leave device off until 100% charged.
Still no fix for the original post’s problem? Having the exact issue with my xzs right now.
lstic said:
Have you tried cleaning/replacing the charging port itself? As i see, you replaced only the flex cable.
There's probably extremely weak contact somewhere in the charging hardware i think, because you need 3.0 A charger to get any kind of charging response. Weaker current probably gets lost at that 'weak contact'.
Buying new chargers won't fix that if you ask me
Click to expand...
Click to collapse
Thanks for the hint...
Old Thread, I know, but I encountered this issue today on an Sony X compact - F5321. Fixed it and want to report back for the next guy.
Same symptoms, noticed first a slow charge, phone was drawing low current and only responding to cable after 10 seconds of plugging in. I than checked for data connection, couldn’t get any. Opened it changed the USB port - BINGO - that fixed the issue, everything working nice.
TLTR: no Solution in Software, it’s a faulty USB-port. change it.
Have a nice day.