ok i have a unlocked mda and flashed it with the titanium WM6 but what would be the best way to go back to the WM5 that is for the 8125
Xtreme80 said:
ok i have a unlocked mda and flashed it with the titanium WM6 but what would be the best way to go back to the WM5 that is for the 8125
Click to expand...
Click to collapse
If you have a G3, then just download the Cingular 8125 rom (its on the HTC website) and flash it since you are CID unlocked. (WARNING: Be sure you have a G3, because if you have a G4, and you flash the Cingular rom to your MDA, you WILL brick it!)
If you have a G4, then get the Cingular 8125 rom, and then use ShellTools to pull out just the OS part and install it.
Related
How can I tell if my phone is cid-locked, I would really like to change the ROM without the risk of bricking it. Has anyone one tried lokiwiz to cidunlock their phone? any advice would be appreciated. BTW I bought the phone from gray market in Hong Kong and is Vodafone branded, do you think it would be locked?
It came preloaded with Dopod Rom, but I don't like it that much. Also what is the best radio rom, the dopod radio rom is a bit weak.
IPL 2.15.0001
SPL 2.15.0001
Rom vs: 2.15.13.27 WWE
Radio: 02.19.21
Protocol version: 4.1.13.09
Ext ROM: 2.15.13.21
Thanks
locked
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
kenxu said:
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
Click to expand...
Click to collapse
so should I try to flash a rom and see what happens? if it goes through without an error it is cid unlocked? if an error pops up it is locked? Should I try this or should I avoid the risks? Any ROM suggestions? Qtek maybe?
Since your phone is G4 chip, i'm pretty sure you are CID locked. Dont worry about the CID locking for now, GOOD ROMS outthere been using different programs to get around CID locking problem. I suggest you can start with PDAMobiz rom from the other thread. REMEMBER USE G4 program not G3 or other programs. or look for any rom that has NoVender CID in the name.
MDA VARIO II with Dopod WM6
I recently bought Tmobile MDA Vario ii with Dopod Wm6. When it boots it shows dopod sign so I think it is dopod. The ROM is 3.54.707.3.
I want to upgrade to Wm6.1 but Tmobile has only official 3.60.xx rom presently available for download. Can I directly flash any Hermis compatible ROM on MDA Vario II.?
Since it has Dopod WM6 the CID lock must have been diabled I suppose. Am I right? and should I directly flash any HERMIS official or extended ROM? what are your suggestions Thanks
Hemant
I don't know enough about the Hermes and flashing to be certain, but I think you'll need to HardSPL (which bypasses bootloader CID checks) before flashing a ROM.
Take a look at the Hermes sub fora before doing anything though...
Hy!
I have my mda vario flashed with wm6, and works ok. But now, I want another version of wm6 rom on my mda vario. My ipl/spl is 3.08.
Question:
Can I just flash it now with another wm6 rom, or I must first downgrade my ipl/spl? Or is there something else what I have to do before flashing my mda vario with another wm6 rom.
Thanks for HELP!
loop12 said:
Hy!
I have my mda vario flashed with wm6, and works ok. But now, I want another version of wm6 rom on my mda vario. My ipl/spl is 3.08.
Question:
Can I just flash it now with another wm6 rom, or I must first downgrade my ipl/spl? Or is there something else what I have to do before flashing my mda vario with another wm6 rom.
Thanks for HELP!
Click to expand...
Click to collapse
always go through the forum and read before posting and starting any thread,this question has been asked and answered 100 of times,if you wud have cared to search read,you must have found your answer,there was no need to start a new thread for this.
As you have already upgraded to wm6 rom and you know the whole method,why than put this question,yes you can upgrade to any wm6 rom.it doesn't matter if you have ipl/spl 3.08,it's just a bootloader upgrade.New roms are cooked without containing any ipl/spl,therefore they do not change any ipl/spl,so any new latest wm6 rom can be flashed,as your device is already cid unlocked and will remain unlocked,good luck
if you are already running wm6, then read the reviews of the other roms and flash away, now choose the rom that would suit you best
You may find it beneficial to back down to one of the official ROMs first though (T-Mo 2.26 US is usually used), to avoid ExtROM corruption. See http://forum.xda-developers.com/showpost.php?p=1579787&postcount=2 for possible ill effects on battery life if you do not.
Hey,
I installed a WM6 ROM, but after reboot I still have WM5 installed and O2 starts installing stuff. Does this mean my phone is CID locked? I had an IPL/SPL 1.05 and upgraded to 3.08 already. If I need to unlock do I have to downgrade back to 1.05 somehow? Can someone tell me what needs to be done?
Thanks!
isihie said:
Hey,
I installed a WM6 ROM, but after reboot I still have WM5 installed and O2 starts installing stuff. Does this mean my phone is CID locked? I had an IPL/SPL 1.05 and upgraded to 3.08 already. If I need to unlock do I have to downgrade back to 1.05 somehow? Can someone tell me what needs to be done?
Thanks!
Click to expand...
Click to collapse
your phone is cid-locked and should be a g3, and yes you have to downgrade to ipl/spl1 or 2 because with ipl/spl 3 you can´t cid-unlock your wizard
READ THIS
http://forum.xda-developers.com/showthread.php?t=298613
i have alrady unclocked and i made the upgrading but the OS still OS 5.1 not 6
Hi Community,
my mda vario III (HTC Kaiser) is an waranty case and i badly need the original rom incl all, this one in the forum is only the OS without radio spl and so on.
best regards
HT
I also needed it, bust just installed the OS and a working Radio.
T-Mobile does not even care what is installed, i guess they don't even startup the device but send it straight back to HTC. I switched about 20 T-Mobile HTC Devices and it worked everytime to just install the OS and a working Radio.
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
DaveShaw said:
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
Click to expand...
Click to collapse
thats teh problem i dont know them :-(
Ah, Just have to see if anyone knows the OEM SPL and Radio versions.
Does it have to be WM6 or Wm6.1 Versoin, or are you not bothered. I don't think anyone will care so long as it is a T Mob stock version.
Ta
Dave
WM 6.1 T-Mobile German
You can download the latest German ROM from the T-Mobile website
http://www.t-mobile.de/fremdcontent/1,2790,123254,00.html
Hallo. Can I go back to my previous SPL/IPL??I unfortunate upgreated my G4, WIZA 200 to 3.08..I have no idea how to go back or just make 2,25, 2,26..for instance. It was: IPL 2.21.2.126 SPL 2.21.0001. PLEASE HELP.
Hi,
why do you wanna downgrade?
I use 3.08.0001, too, but don' see any reason to change it.
If you still have to, you can try the Wizard Service Tool. It allows to flash almost everything, even an older IPL/SPL.
All you need is this tool and a ROM file with the IPL/SPL version you want to flash. Tryout the OEM Roms in the Wizard Wiki. At least one of them should have the right version.
Duke
wm6 on G4
I think I can not install WM 6.0 without CID remowing..and It is impossible to do with 3.08 SPL...Am I right?
Hi,
I got an Wizard G4, too, with WM 6.1, IPL/SPL 3.08.001 and CID NOT unlocked.
As said, you can try the WST, worked very well for me. Maybe you have to flash an original WM5.0 ROM before trying to flash WM6, that's how it worked for me.
Duke