Hi everyone, i need some help please - JASJAR, XDA Exec, MDA Pro ROM Development

Hello guys, it's great forum... one of my favorites
So now i need help. recently i've bought a MDA (PRO?) or HTC Universal
So i need advise - which one is the best ROM that i download and flash on my beloved device... and how to do it ?
PLS HELP ME, i am new in this, i have flashed successfully my previous HTC P3300 with the black&whyte v3 WM6, but now i don't know what must be done with this big machine - the universal...
Any suggestions and advises are wellcome and will be apretiated...
P.S. - Sorry 4 my language I need more practice

certomaz, I suggest you to read the wiki first! beside this is also helpful http://forum.xda-developers.com/showthread.php?t=290234
anyhow short summarize of the new ROM flashing:
1.0 put your device in to boot loader mode with pressing > power button + hardware button for the back light + push the reset button until you see on the screen become dark and it says "serial" mode.
2.0 connect your device to your computer.
2.11 open your folder in which you have your ROM file (nk.nbf) in this folder you will also find the upgrading utility (UpgradeUt_noID.exe) However the new ROM does not have the radio file included. if you wan to upgrade as well your Radio file then you need to get it from the FTP side. it seams most of the guys here happy with the radio version of 1.15 but I think it is up to your location.
3.0 Start the exe file and follow the screen.
4.0 after some 10-15 minutes the upgrade will be completed. then you disconnect your device from your computer.
5.0 press both hardware soft buttons + with your stylus push the reset button until you see the message on the screen > press 0 to restore factory default< which you will follow.
6.0 let the device boot up and follow the screen.
well I hope it is helpful. good luck
certomaz said:
Hello guys, it's great forum... one of my favorites
So now i need help. recently i've bought a MDA (PRO?) or HTC Universal
So i need advise - which one is the best ROM that i download and flash on my beloved device... and how to do it ?
PLS HELP ME, i am new in this, i have flashed successfully my previous HTC P3300 with the black&whyte v3 WM6, but now i don't know what must be done with this big machine - the universal...
Any suggestions and advises are wellcome and will be apretiated...
P.S. - Sorry 4 my language I need more practice
Click to expand...
Click to collapse

Related

Xda mini Now DEad!!! Somebody Pls Help here

Hi All
I have received a Mini O2 XDA for language change from German to English. Going through the Forums I finally got downloded English Rom.After updating the Phone started to vibrate continously.Now the phone refuses to switch on.When I connect the USB cable ,only red light is seen on the earphone part. I cannot flash also with any other version as the USB does not detects the Phone.
Pls somebody give me a detailed explanation on how to revive the Phone.
Best Regards
Supremegsm
Try to get it into Bootloader: press power & camera & softreset all together & wait till the screen reads 'serial v1.xx'. No backlight so hard to read. If this works, connect usb & flash again with an exe file.
Doesn't sound any good that red led, did you charge it fully?
M
Thank you for your early reply.
I can now get into Boot mode and can read USB V1.02.But sir can you pls tell me where can I download the compatible ROM version .
Battery is fully Charged.
http://www.t-mobile.nl/zakelijk/htdocs/page/service/mda_compact_upgrade.asp
or visit the wiki, link on top of the page, & go to the magician section.
Succes, M
Ok.will try and post results here.
Thks & Rgds
No prob, no fun at all killing your device. Or worse from a bloke who's much taller.
Thank you very much for your solution.Now I can switch on the phone and everything seems to be working perfect. Only one thing when that I have loaded phone rom with i-mate.IS there a way I can load O2 Rom or pls give link where I can download O2 XDA II mini ROM.
Thanks & Rgds
Supremegsm
Take a look overhere ftp://xda:[email protected]/Magician/Extended_Roms/ it contains several O2 branding ext-roms in different languages. Just put the desired cab-files on your storage card & execute them to install. Might be that you want to hard-reset first & skip the I-mate ext-rom from executing by a soft-reset just after the initialization ended (press screen to begin using your device).
Cheers, M

My Prophet (Jamin) Upgrading Problem

yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
araheels said:
yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
Click to expand...
Click to collapse
Try flashing it with the last WWE (non-arabic) version available for download from i-mate site.
thanks bro, i did try to flash but its not connecting, becaz its not on, when i press power button it just blink and not turned on, i am so worried, flash is done when active sync is working and the jamin is turned on, its not on
Most likely the file corrupted.
I dont know how to put Prophet in bootloader mode but can be found in forums.
Try to put the device in bootloader mode; and try to flash afterwards.
Cheers
I have the same problem after flashing with a corrupt rom. Only if i connect the JAMin to the power supply and then press and hold continuously at the camera button and press the power button once the device go to the 'boot loader mode'. But this don't help me because i have no connecting to the PC over USB.
read the forum it's written how you can put it on boot loader mode or you can try to hard reset
I don't find this post .
I try the hard reset but they dont't help.
I don't come in the boot loader mode, only if i connect the device to the power supply it works but now i haven't a connecting to the PC.
If i not connected to the power suppley and press now and hold continuously at the camera button and press the power button once there is now boot loader i see only for one moment
a white screen and also for one moment the blue light in the speaker
can i do not install the rom from my sd-cart ???
have anybody the image from JAMin ??
I have the same problem
Did you find solution ?
Forget about power button.
Press camera button. While holding it use the stylus to softreset. Take the stylus out but hold the camera button pressed. In less than 5 seconds, you will enter bootloader screen.
Hope it works.
You must put your device on to bootloader mode, how? Press the camera and the coomon manager (at the same time) put your stylus into the whole (as you made a normal soft reset) put your stylus out of the device but not the camera and the common manager botton, just a couple seconds after.
Don't be affraid is your device creen become with three colors, is normal nad the typical signal is on to bootloader mode. Now is time to find a JAMin ROM in the club imate web (if you are a member) or here in a ftp.
Tell us if you can fixed the problem.
jamin no boot
dear freind
try to connect the power supply to the cabel to enter to the bootmode and try to do software (i have same problem after flashin the jamin by kjam rom )
SAME PROBLEM AFTER DOWNGRADE CAN SOME ONE POSTE NEW ROM FOR THE IMATE JAMIN
probleme solved who want to know how to solve problem pm me
Any idea?
Do you have the solution???
Thanks
hi im having the same problem can u please inform me how u solved it, as im loosing the bootloader screen when ever i unplug it from the power.
buying a cradle will do the job
Jamin flash error
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Try this
Take a look at this thread - I think you are having the same problem as PianoSam
http://forum.xda-developers.com/showthread.php?t=300356
lordlinus said:
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Click to expand...
Click to collapse
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
lordlinus said:
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
Click to expand...
Click to collapse
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
No
It's in the link - just download it from there!!!!!!
lordlinus said:
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia
Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!
Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......
The same problem, the 2.03TX WWE is a nightmare for me.
I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini
you should flash from bootloader.
I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?
hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..
I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful
Hello
I was sucessfull.
There is a 2 step flash!!!
P-O
I try to use this too but nothing no flash ....
Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...
ok this img of error the image 1 when start exe the other when stat update noid
jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723
I use xp ...
well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.
I try more and more but notuhing
Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

"catch-22" Phone don't want let me flash a new ROM, PLEASE HELP!

Hi,
I'm almost broken down :'(
since days I'm trying everything to update the rom of my smartphone with the following operation system "XP and Vista".
I've got a Xda Touch diamond, but Vista says I've got a Touch Diamond P3700. Now let me tell you the catch-22:
I'm connecting the phone via usb cable to the pc(any usb-hub on the back of the pc)
Vista and Xp says "connected". Now I'm running RomUpdateUtility.exe. In the same folder
is the new rom called "DIAMIMG.NBH"
Now I'M clicking "Next" and again "Next". Now he says"verifing the information on your PDA Phone.. Please wait..
After that he says Current Information about you PDA Phone: Image version: 1.93.407.1
So now I'm clicking "update" the new Image version is 1.00.000.0
(If I use another Update Utility he says to Image Version 2.03.207.2)
Clicking "Next" and then again "Next" My Phone turns black and then the phone displays the three-color mode
and below the "serial" change to "usb" and a few
seconds later the phone shows a bar of 0% and on WinXP the bar also shows 0%.
Suddenly the connection is off. And a few minutes later the update Utility(PC) says EROOR(262) UPDATE ERROR.
I even disbaled the standby and hibernation modes on the PC. And I even tried flashing from Internal Storage!
ABsolutly futile! The three-color mode displays DIAM300, SPL-1.30.OliNex, MicroP-Diam (Led) v11,
Psoc_Diam STAGE_PVT v=x32
Is may Phone locked for new roms?
Please HELP ME before I'm going sick ´:__(
Best regards
Colbad
Welcome to forums
Hope this link helps
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Good luck,
nothing helps. I give it up!
I'll get me a new phone.
slow down lol,
dont rush out and get a new phone just yet.... all flashing problems are actually quite simple, you just need to be methodical and patient
Firstly, i always flash with XP, call me old fashioned but its what ive always done lol.
in the past when ive had 262 errors (whilst flashing my touch cruise RIP) the radio i had installed at the time prevented further flashes.
What you havent said is what your current rom is and what rom you are trying to flash.
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
colbad said:
Hi again
I bought me a new one!
my new htc touch diamond makes me also sick.
If I download from the HTC page the new software rom
there's no problem updating my Smartphone to 100%.
But if I try to use any foreign rom for updating he freezes by 0%.
What is that?
I can't use any foreign rom from other peoples,
I'm absolutly helpless to this issue.
Please help me anybody :=)
Best regards
COLbad
Click to expand...
Click to collapse
Colbad,
Please tell me you have read the wiki or at least the stickys on how to flash with either hardspl or uspl etc??
If not ur gonna end up with a fancy looking brick.... what have you tried so far and from where?
sorry for bothering you.
I solved the issue finally
Now everythings fine.

[HELP] Acer s200 update rom fail

I have try to flash the unofficial rom. However, the phone rebooted during the update process. Now, my Acer s200 only can display the splash screen and cannot go into windows...
Anyways can flash the rom again?? I tried to use Acer_EUU.exe, but it need to detect the phone by Activesync. Anyways can flash the rom bypass activesync?
Some problem....
Hi!
I tried to flash from original EN ROM version on RU version and had the same problem - the device displayed Windows splash screen and then just reboot. So, I was confused but I didn't stop this process and after half an hour Windows loaded...(during this time I removed he battery and pushed soft-reset button a lotof times).
So, my only advice is to try to wait with re-booting device till the Windows boot and then to flash the original ROM (if you'll find it).
For me - after I loaded RU version of Windows I just flashed for custom EN ROM and it was OK (without this issue).
Good Luck!
It solves your problem..
DimICE said:
Hacked ACER_EUU.exe
Link: http://www.mediafire.com/?wy2yynnjz2z
ActiveSync connection is not needed!
Also is not needed to edit version.txt..
Just replace original ACER_EUU.exe with this file, execute it. Press next,next,ok,ok.. Message "Waiting for download mode coming" appear..
Power your Acer s200 with Power+Camera buttons pressed and connect to computer.
Tested on 2 acer s200 phones
Sorry for my English)))
Click to expand...
Click to collapse
link not working ( http://www.mediafire.com/?wy2yynnjz2z )
http://dimice.ru/ACER_EUU.exe
Rom update can be computer's fault
DimIce's program works perfectly. I've thought I bricked my phone many times, but always have been able to recover. This is what I recently discovered. In the middle of a flash, my computer said "write error". 'Thought my phone would stay dead. Finally, I switched to another computer and flashed the phone with no problem. So if you suffer a bad flash, simply change computers. If none is available, reboot your computer to clear the memory, etc. (by the way I'm using Windows 7 x64) and try again - sometimes even changing the USB port might help. The phone excels in it's ability to be re-flashed -even if you suffer disaster in the middle of a procedure.
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
orb3000 said:
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
Click to expand...
Click to collapse
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
rafyvitto said:
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
Click to expand...
Click to collapse
If you have any problem please take it to the council.
my only intention is to let new members know that this is an HTC forum only!
So they don't waste their time
If that bothers you, shame...
XDA has never meant to be HTC only.
Just open your eyes, dear sir.
I have a problem with the installation romu message pops up to me(sorry acer usb host driver must be installed in windows xp sp2 or later version please update os version to windows sp2)
stuck on clean boot screen
Hi, i was updating from EUU_Acer_S200_3.003b.00_EN_03.03.08_3.003.01_20100119 to EUU_Acer_S200_3.003c.00_ES_03.03.08_3.003c.00_20100201 but accidentally closed the acer's application, so the phone is stuck on "clean boot" screen? what should i do?, thank you!

Categories

Resources