i made a mistake and updated my imate jamin with the rom below
http://rs28.rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
now my jamin does not open red and blue lights blink very short and no other response i can not upload another rom because jamin does not start help please
my jamin does not enter bootloader mode and also i can not hard reset it screen blinks for a short time and it does not give any response
take a look at link
Related
Guys,
3 days after my first attempt to flash a rom (beside the beatiful palms very long ago).
My first attempt stuck at 19%. After that I stuck in the three color screen. I thought it was a brick now. After searching the forum I could give my kaiser a second live through mtty and 2 commands. yeeh.
But after that every new attempt to flash the three color screen did not appear. When I forced a three color screen (through the camera button) I of course got a connection error.
I'm sure that I'm do something wrong, but I can't live (as a meaning, not for real )with the Idea I cannot put another rom on my kaiser.
I also tried jumpSPL.156, but that won't start on my device (complaining about certificates and or missing components, but in dutch language)
device information
vario iii
rom 1.56.114.4
date 9/1/07
radio 1.27.12.11
bootloader
KAIS130
SPL-3.03.0000
CPLD-8
Hope someone can tell me the right direction.
Regards
Chris Gradussen
These
from the jumpspl 1.56 thread:
jockyw2001 said:
Notes:
1. if when running a JumpSPL an error is shown try to application unlock your device first with SDA_ApplicationUnlock (you must run this on PC with an activesync connection via USB cable). If you still get errors you need to hard reset your device (power off, keep both left and right navigation keys pressed and power on)
Click to expand...
Click to collapse
I hope u'll find a solution in this link:
http://forum.xda-developers.com/showthread.php?t=354061
Thanks,
The hard reset solved evertything!
i tried to reset me g4 from bootload menu via the restore tool from the wiki and i have a screen stuck in this mode with nothing more help
ipl2.10.001
spl2.20.001
gsm02.4721
os2.20.7.34
1. try softreset or
2. try to go to bootloader mode then reset or
3. try to hardreset
if nothing helps and you can enter bootloader flash NVID ROM
well as i am upset a white screen appear after the setup and nothing more
what you mean white screen?
please read on wiki or on this forum how to upgrade official ROM..ask if you need help
well it updated and after the restart the blue screen fade to a white one and stays like that
i forget to mention that my device is cid locked
download and flash Qtek NVID WM 5.0 ROM or PVTemp ROM.
http://forum.xda-developers.com/showthread.php?t=376561
read this also
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
well it is an issue of battery maybe it is not working well and has no power to properly boot up ,just a thought but i will search for a new battery
Here is the story, I have another palm treo 700w I accidentally update the ROM with flash with this rom
Alltel - WM5 OEM (Stock) ROM, the flashing was successfully then when i try to press the start buttom I didn't see the icon, so I reset the phone when i try to turn in on it won't turn on I though i was the battery I charge the phone but even the light won't light up now I have two treo on the same problem
any advise that will help me by the way cannot send the phone to verizon coz am here in the Pacific.
Thanks in advance
d1ulove is online now Report Post Edit/Delete Message
I dont think its bricked try getting it into bootloader and work from there http://Forum.xda-developers.com/showthread.php?t=256236 try a fully charged battery on it
So,i upgraded my i-mate jamin whit touchflow 3d lookII,and before the upgrade is finish i got a message: update error!!!!!!!!!! And now my pda is dead,no flashing the led when i connecting the pc,and if i want to run the original rom back the program say:connection error! I can't do hard reset because my pda don't want switch on!
Please if somebody can,help me.
play007 said:
So,i upgraded my i-mate jamin whit touchflow 3d lookII,and before the upgrade is finish i got a message: update error!!!!!!!!!! And now my pda is dead,no flashing the led when i connecting the pc,and if i want to run the original rom back the program say:connection error! I can't do hard reset because my pda don't want switch on!
Please if somebody can,help me.
Click to expand...
Click to collapse
wait we need more Details id you try leaving the phone charging then take battry out and put it back in? also does the Device power on? I mean do you see the qtex screen you know the boot screen? also try putting it in bootloader mode then flash
__________________
Thank you very much for your help.I tried everything, which you wrote, already. I cannot switch the device on. If I put it on a charger then sometimes automatically onto 2-3 seconds the bootloader appears,afterwards turns off.
He responds to nothing without a charger.Sorry for my bad english.
play007 said:
Thank you very much for your help.I tried everything, which you wrote, already. I cannot switch the device on. If I put it on a charger then sometimes automatically onto 2-3 seconds the bootloader appears,afterwards turns off.
He responds to nothing without a charger.Sorry for my bad english.
Click to expand...
Click to collapse
My Prophet has same symptom as yours. After 2 nights of charing, it now turns to charging light on all the time, no bootloader screen. After charging 1 day, it still on charging lamp. still cannot turn on, still cannot connect with PC.
what happens
i hope u answer my request !
i found u the smartest person in this forum !
i have jamin after upgrading from a k-jam rom
it cuts in the middle of the uprade!
when i turn it on the LCD flash for one second
and then turn off
also i cannt enter bootloader to flash another rom
now my jamin is completely dead
hope to help me i am only a starter
well 24 views and no reply
plz guys dont let me down
Is your battery is well charged when the screen was flashing and turning Off ?
100%100 yes my battary is comletely ful
Why on earth did you try to flash a Jamin with a K-jam rom?
Are you able to get into bootloader ie. hold down the COMM button and press the soft reset?
If you can get into the bootloader your phone can be saved, and I would advise you to have a deep read of the WIKI page.
Dixiesmu said:
Why on earth did you try to flash a Jamin with a K-jam rom?
Are you able to get into bootloader ie. hold down the COMM button and press the soft reset?
If you can get into the bootloader your phone can be saved, and I would advise you to have a deep read of the WIKI page.
Click to expand...
Click to collapse
Try Doing Hard Reset by Pressing camera, comm manager, power & soft reset button.
if successfull then try entering bootloader mode.
Thanks.
try removing the battery n hard reset ...... connect it to pc n sync(if device do not go to bootloader directly) download bikertibi's ROM
flash it......
REMEMBER use hard spl for ur version(g4 or g3) be4 flashing .....
if it directly goes to bootloader let me know
don't wry....... cheers!
Aju
the same problem with my prophet
i sent twice in the forum once in this topic
http://forum.xda-developers.com/showthread.php?t=319636&page=3
after going with the steps in it without any result
and once in a separate topic
http://forum.xda-developers.com/showthread.php?t=632446
without any response till now
i hope some one here in this topic can help?
Cutten USB works only for the g3 chipsets...
Well just connect to pc by USB and make it in bootloader