stack at qtek home screen with the 4 red info lines - JAMin, XDA Neo, S200 Software Upgrading

i tried to reset me g4 from bootload menu via the restore tool from the wiki and i have a screen stuck in this mode with nothing more help
ipl2.10.001
spl2.20.001
gsm02.4721
os2.20.7.34

1. try softreset or
2. try to go to bootloader mode then reset or
3. try to hardreset
if nothing helps and you can enter bootloader flash NVID ROM

well as i am upset a white screen appear after the setup and nothing more

what you mean white screen?
please read on wiki or on this forum how to upgrade official ROM..ask if you need help

well it updated and after the restart the blue screen fade to a white one and stays like that
i forget to mention that my device is cid locked

download and flash Qtek NVID WM 5.0 ROM or PVTemp ROM.
http://forum.xda-developers.com/showthread.php?t=376561
read this also
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery

well it is an issue of battery maybe it is not working well and has no power to properly boot up ,just a thought but i will search for a new battery

Related

i think i have brick my dopod 818pro.. Please help

i think i have brick my dopod 818pro
have follow the step 1 and install without any error.
then installed the Cert_SPCS.cab and EnableRapi.cab.
then installed the Prophet_4.0.0.0.1_PV rom by running Upgrade_ROM.bat from the computer.
after that restat the device.
AND the phone boot after the HTC Innovation screen and stay at the loader screen.
NOw my screen only showing :
IPL 2.15.0001
spl 2.15.0001
gsm 02.69.21
os 4.0.0.0
and wouldn't boot in ???
anyone here please help
tq
finnally manage to boot in.
redo the step 1 in boot loader mode.
then installed the pdaviet 4.0.0.0.1 from pc
and it is done.
very nice screen
will try it out n c .
tq very much
Hi, how did you manage to solve the issue?
My situation is a little different.
-Load Step 1... ok Successful
-Load Upgrade_Rom.bat... completed
But when I reboot the PDA I just get this screen!!!
Nothing is responding.
PC cant detect the device.
Hard reset also get back to the same screen.
Please help
reboot your device into the bios screen (reset while holding camera button)
at that point i usually just put on the default WM5 comming from QTEK to reestablish operations.
i am using the prophet touch series from gullum and for that i do the following steps after having reestablished the WM5.
Put on PDAViet_TEMP
wait until phone restarts and shows 'Touch to get started'
Put on the Prohvet Touch (VIII or IX Beta)
Hard Reset (Com and Cam button, wait for the message asking to confirm afetr you release the reset button but hold on to com and cam buttons until message pops up) Confirm Hard Reset
So far i repeated this process about 6 times and it works every time
best of luck
need explanation
im planning to buy a dead prophet.....as the seller states...when he posted the pic, it still enters bootloader mode...but it shows
IPL: 1.00
SPL: 2.20.0001
Can this still be repaired? and is this possible? how can i repair it...it is being sold at a very cheap price
I've had similar issues and by just putting the original rom or the WM5 if you can enter bootloader mode thenit comes back to live. Once WM5 which is very stable is loaded, you can upgrade to the WM6 roms. Has always worked for me but it is a bit nerve racking to see the thing frozen. The key when upgrading is to use than WM5 rom and upgrade from there.

Help! My SDA won't boot after flashing radio rom!

I had the Iphone rom and romupdated it with the 8310 raio only rom. Now it only flashes the splashscreen and it turns off. I can't even activesync it to reflash the rom. What can I do??? Please help.
jacknjill said:
I had the Iphone rom and romupdated it with the 8310 raio only rom. Now it only flashes the splashscreen and it turns off. I can't even activesync it to reflash the rom. What can I do??? Please help.
Click to expand...
Click to collapse
can you still get to bootloader?
No more bootloader screen, just a blank white screen.
I had the bootloader screen b4 and tried to reflash it, even though flash was successful, it still turns off after splash screen. So I tried one of the Qtech bootloader roms and flash that, now it's worse than before. I only get a blank white screen when I load the bootloader.
jacknjill said:
No more bootloader screen, just a blank white screen.
I had the bootloader screen b4 and tried to reflash it, even though flash was successful, it still turns off after splash screen. So I tried one of the Qtech bootloader roms and flash that, now it's worse than before. I only get a blank white screen when I load the bootloader.
Click to expand...
Click to collapse
i also got the problem with my sda, it also happened while flashing, do u already found a solution
Guys, are you speek about one subj? Bootloader mode is activated when you start your device with camera button pressed. There is NO white screen - in bootloader mode OS is NOT loading at all! But - you can start re-flashing process as usual
If it works, I recommend you to flash back your native ROM and then check the device. If everything is fine - you know what to do If not - let's continue thread...
And one more thing - are you sure, that your SDA is based on Tornado platform? AFFAIN SDA has two reincarnations - one of them is based on Typhoon platform, other one - on Tornado one. There are a LOT of cases, when people flased Tornado ROM to the first one and had a dead device after it Be VERY carefull!!! And read this thread http://forum.xda-developers.com/showthread.php?t=288498
ZlydenGL said:
Guys, are you speek about one subj? Bootloader mode is activated when you start your device with camera button pressed. There is NO white screen - in bootloader mode OS is NOT loading at all! But - you can start re-flashing process as usual
If it works, I recommend you to flash back your native ROM and then check the device. If everything is fine - you know what to do If not - let's continue thread...
And one more thing - are you sure, that your SDA is based on Tornado platform? AFFAIN SDA has two reincarnations - one of them is based on Typhoon platform, other one - on Tornado one. There are a LOT of cases, when people flased Tornado ROM to the first one and had a dead device after it Be VERY carefull!!! And read this thread http://forum.xda-developers.com/showthread.php?t=288498
Click to expand...
Click to collapse
so in this case, it seems like it's mine, just got a white screen and no bootloader mode
I would be lucky if I can still get into bootloader mode which means there is life left. Now, all I get is a white screen on the Tornado( it's a T-mobile SDA-silver color with bump). I am looking to see if the dealer would be able to revive it. I got a MDA now
About get into bootloader there's enough hints from peoples above. Simply hold camera button while you press the power button, and soon you will see a three color stripped screen, without normal booting splash like "DOPOD". Then you'll be able to flash as you like with RUU of MTTY.
I'm just guessing you've been flashed a Radio version over 02.00.09. As I know, you have to upgrade your IPL version to 2.00 as well as a SPL upgrade to version 2.00.00, for the new RADIO to work. Just a hint you may not noticed.
there's nothing you can do. I had similar experience, went to bunch of services, no one could fix it.
Some one can repair it by "change the code lib", I don't know how to say it in english. But apparantly someone in my city can do it without touch your phone.
ccl13 said:
Some one can repair it by "change the code lib", I don't know how to say it in english. But apparantly someone in my city can do it without touch your phone.
Click to expand...
Click to collapse
That means I have to wait till next year when I head to Guangzhou to do it then.

Fatal error on HTC 710

HI,
I have a fatal error on my HTC S710. After switching the phone on I get 3 horizontal bars on top a red bar with VOX ONBL 1.34.000 in the middle a green bar with SPL 1.34.000 and the a blue bar with CPLD -04
I have tried to upgrade to 1.34 but no success
After about 30 hard reboots I can get the phone working for 5min and then it hangs again and the 3 bars pop up.
So I think I need to completely reinstall WM 6 but can't find the file on this site?
And what tool to use the flash the rom??
Thx,
Go to the HTC site and download the official ROM! http://www.htc.com/support/support.htm it's in the e-club section and is only for HTC devices (not SPV's etc).
BTW google "S710 rom" reveals a lot of results. You could try that first.
Tho,
thanks for your reply. Have Downloaded and upgraded the ROM from HTC E-club. However now the phone hangs completely can't if get it to start up normally. Tried Hard reboots soft reboots even pressing the menu buttons above the 1 and 3 key and then pressing the power button.
Where does it hang when booting? If you're able to get to at least the black HTC screen, then the ROM was written however might have bad blocks in memory.
Try a hard reset with SIM and SD out of the device, hold the two soft keys and press power, hit the Green call start button when it prompts you - leave the phone for at least 15 minutes to be on the safe side. Then flash this; ftp://xda:[email protected]_Vox_ARA_1.27.415.4_4.1.13.47_02.98.90.exe
and let us know what happens.
thx for the info h4waii.
However a hard reset does work. Acourding to the HTC technical helpdesk the boot loader is stuck, so it cant read the operating system files to boot the phone in to windows.
Also the Active Sync doens't reconises the phone any more.
H4waii,
I can get into the bootloader. I read on an other post that you said "If the ROM is corrupt, this is your best way of "recovering" your phone, if the ROM was flashed properly, after getting into the bootloader, run ruurun 0 and ResetDevice to boot it back into OS."
But how do run that ruurun. Still can't sync it with my laptop??
You need a terminal emulator, you can use MTTY. It's attached in the Vox USPL sticky and I will get you the link for the boot loader recognized commands.
EDIT: Here is a link to the USPL sticky that has MTTY attached: http://forum.xda-developers.com/showthread.php?t=330909
and here is a link to the the Wiki for Hermes boot loader, many of the commands will work on the Vox: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
There is also a tool for the Universal that resets the DoC instructions, you might want to either give that a try or look at the command 'task 28 55aa'.
You do this at your own risk also, just wanted to throw that out there.

stuck with tri color after trying to sim unlock, help please

hi
i tryed to unlock the tytn 2 orange uk.
tryed to hard spl, and end up with white screen, so i tryed to use the 1.56 jump spl, and then i run the patched radio, it went to 95 % and then stoped, since then i stuck only in tri color mode, recovery dosent bring it back.
what i think is that if i had the original orange rom with the radio, i could save the device , any one have a link to the rom ?
thanks.
another idea is, i have another new unit, same one, which i didnt try to unlocked yet, is there a tool that i can take the rom from that device ?
thanks.
Stuck in Tri Color Screen
I have the same problem as yours. i tryed to unlock the AT&T Tilt to Vodafone.
I used the Kaiser Unlock tool from his website and then, it went to 95 % and then stoped, since then i stuck only in tri color mode, recovery dosent bring it back. How can i get it running? is the phone dead.
Need your help
This has been answered and asked a few times. Whilst you seem to have searched and found a similar thread, I suggest you try here http://forum.xda-developers.com/showthread.php?t=399569&highlight=tri-color
Ta
Dave
Do not use SoftSPL to load any radio or ROM, it is only to change the SPL
You should use it to load a hardSPL and then flash any ROM or radio you like.
Now you need to use MTTY to send commands to the phone.. search a little and try no to do things without reading.
http://forum.xda-developers.com/showthread.php?t=369282
http://forum.xda-developers.com/showthread.php?t=354061

HELP!!!

ok, i have problems and as a very noob i supose this is the best place to get help.
i've tried to upgrade my Qtek S200 with ROMUpdateUtility_NV_G4.exe .i made exactly the steps was written ther. after the procces was complet... my phone don't want to start anymore. is just showing the screen with the O2 after that the one in 3 colurs where you can see IPL 2.20.0001 and one down SPL 2.15.0001
... and that is!
any idea what i can do next?
thx in advance
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Perhaps you´ll have to restart the hole process
Good luck,
try to do the steps from the recovery, but no way to go to the bootloader mode. pressing the comm and the rest will not do nothing except the return to the 3 colurs screen
i've maneged to do the hard reset.pushed the green button. "formated"...but then restarting and everything the same.
except now the o2 screen is flashing up like 1 second, then the three coulours one and again , over and over
nobody? come on people...
dunadanul said:
try to do the steps from the recovery, but no way to go to the bootloader mode. pressing the comm and the rest will not do nothing except the return to the 3 colurs screen
i've maneged to do the hard reset.pushed the green button. "formated"...but then restarting and everything the same.
except now the o2 screen is flashing up like 1 second, then the three coulours one and again , over and over
Click to expand...
Click to collapse
The three colors screen is the bootloader.

Categories

Resources