ok, i have problems and as a very noob i supose this is the best place to get help.
i've tried to upgrade my Qtek S200 with ROMUpdateUtility_NV_G4.exe .i made exactly the steps was written ther. after the procces was complet... my phone don't want to start anymore. is just showing the screen with the O2 after that the one in 3 colurs where you can see IPL 2.20.0001 and one down SPL 2.15.0001
... and that is!
any idea what i can do next?
thx in advance
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Perhaps you´ll have to restart the hole process
Good luck,
try to do the steps from the recovery, but no way to go to the bootloader mode. pressing the comm and the rest will not do nothing except the return to the 3 colurs screen
i've maneged to do the hard reset.pushed the green button. "formated"...but then restarting and everything the same.
except now the o2 screen is flashing up like 1 second, then the three coulours one and again , over and over
nobody? come on people...
dunadanul said:
try to do the steps from the recovery, but no way to go to the bootloader mode. pressing the comm and the rest will not do nothing except the return to the 3 colurs screen
i've maneged to do the hard reset.pushed the green button. "formated"...but then restarting and everything the same.
except now the o2 screen is flashing up like 1 second, then the three coulours one and again , over and over
Click to expand...
Click to collapse
The three colors screen is the bootloader.
Related
I did upgrade in my O2 Neo, but after upgrade rom i´ts don´t turn on
What i cam do ?
O2 Neo is not a Magician, it is a Prophet (I think)
Anyway, we need more infor. What you do use to upgrade, where did you get it from, how do you perform your upgrade, any error message during upgrade, what's the sign now, all dark, hang on a particular screen, etc.
My Pocket is PM300 HTC
I did upgrade, and this show 100% and reset the pocket after upgrade, by this dont work, the screen splash blink only and turn off.
The led Red and Blue is blinks.
I used RomUpdateUtility HTC and the rom image i used Xda_Minis_Upgrade_v2.21.4.101
You used the ROM of a XDA-miniS (aka `Wizard`) to upgrade your `Prophet`. You are seriously screwed. You may have made yourself the most expensive paper weight you ever had.
Anyway, try see if you can boot into bootloader mode (3 colour screen). If you can do that, there are still hope.
My Pocket is PM300 HTC died
This show
IPL 2.21.0001
SPL 2.21.0001
and turn off i can´t update the rom.
What can i do ?
gmarcel said:
This show
IPL 2.21.0001
SPL 2.21.0001
and turn off i can´t update the rom.
What can i do ?
Click to expand...
Click to collapse
I need more details. That do you mean by `This show`? Where is these information shown? in the bootloader (3 colour screen) or the initial screen where your phone freeze. If you were able to get into the bootloader, you might able to get your Prophet ROM into it. Just start on bootloader mode, and plug in the USB. Activesync will not tell you anything, but you ought to able to still upgrade/refresh a Prophet ROM into it (eg running those ROM with EXE).
Can someone confirm if the ROM he used has IPL/SPL in or not?
Mod, can you move this to Prophet section.
More detail
These information shown in the bootloader (3 colour screen)
the initial screen show only O2.
i cant get bootloader, the Prophet only flashes.
The Activesync not tell anything.
I need move this for Prophet ?
gmarcel said:
These information shown in the bootloader (3 colour screen)
the initial screen show only O2.
i cant get bootloader, the Prophet only flashes.
The Activesync not tell anything.
I need move this for Prophet ?
Click to expand...
Click to collapse
Your statements are contradicting. You said you get these information from bootloader screen but you said you can get bootloader?
Anyway, if can get the bootloader screen. Just stay there. Connect it to your PC. And choose a *Prophet* ROM with EXE extension to run on your PC. It works most of the time. For step by step instruction, do a search here. I bet there are lots of similiar cases.
I can´t get bootloader
The screen with three coulours show about 3 seconds and this turn off.
I hope I'm wrong, but if your bootloader is gone, you device is gone. Hope others can help.
I tried to install the faria wm6 update with the shelltool. everything was going as per the directions when about 3 or 5 mins in the the install process it gave me an error on the phone saying something about the reprog.exe or someting... anyways, the computer said done and to reboot... so I did and now it goes as far as the white TMOBILE screen with the following 4 lines of code
IPL 2.26.0001
SPL 2.26.0001
GSM 02.25.11
OS 2.18.0.0
and it freezes there... it wont turn off either.
Tries removing the battery and reinserting it. Well the same thing happens upon powering on the device. Tried hitting the little hard reset button on the side with the stylus... the screen flashes off and then it attempts to reboot again and the phone freezes at the same spot. Please help. I did everything according to the directions. PLEASE TELL ME I DIDNT BRICK MY PHONE. :'(
Can you get into bootloader mode? If so then its not a brick. Try to go to bootloader mode by holding down camera and voice commander button while powering on. Then reflash your carriers rom or wizard love.
edit:stop double posting your problems there is no need.
Read and follow this:
http://forum.xda-developers.com/showthread.php?t=298613
bwesty said:
Can you get into bootloader mode? If so then its not a brick. Try to go to bootloader mode by holding down camera and voice commander button while powering on. Then reflash your carriers rom or wizard love.
edit:stop double posting your problems there is no need.
Click to expand...
Click to collapse
sorry, I was in a panic and I couldnt search and find a solution fast enough so I posted the question here and in wizard fourm... thanks though. Got my old rom back... now time to try it again.
i think i have brick my dopod 818pro
have follow the step 1 and install without any error.
then installed the Cert_SPCS.cab and EnableRapi.cab.
then installed the Prophet_4.0.0.0.1_PV rom by running Upgrade_ROM.bat from the computer.
after that restat the device.
AND the phone boot after the HTC Innovation screen and stay at the loader screen.
NOw my screen only showing :
IPL 2.15.0001
spl 2.15.0001
gsm 02.69.21
os 4.0.0.0
and wouldn't boot in ???
anyone here please help
tq
finnally manage to boot in.
redo the step 1 in boot loader mode.
then installed the pdaviet 4.0.0.0.1 from pc
and it is done.
very nice screen
will try it out n c .
tq very much
Hi, how did you manage to solve the issue?
My situation is a little different.
-Load Step 1... ok Successful
-Load Upgrade_Rom.bat... completed
But when I reboot the PDA I just get this screen!!!
Nothing is responding.
PC cant detect the device.
Hard reset also get back to the same screen.
Please help
reboot your device into the bios screen (reset while holding camera button)
at that point i usually just put on the default WM5 comming from QTEK to reestablish operations.
i am using the prophet touch series from gullum and for that i do the following steps after having reestablished the WM5.
Put on PDAViet_TEMP
wait until phone restarts and shows 'Touch to get started'
Put on the Prohvet Touch (VIII or IX Beta)
Hard Reset (Com and Cam button, wait for the message asking to confirm afetr you release the reset button but hold on to com and cam buttons until message pops up) Confirm Hard Reset
So far i repeated this process about 6 times and it works every time
best of luck
need explanation
im planning to buy a dead prophet.....as the seller states...when he posted the pic, it still enters bootloader mode...but it shows
IPL: 1.00
SPL: 2.20.0001
Can this still be repaired? and is this possible? how can i repair it...it is being sold at a very cheap price
I've had similar issues and by just putting the original rom or the WM5 if you can enter bootloader mode thenit comes back to live. Once WM5 which is very stable is loaded, you can upgrade to the WM6 roms. Has always worked for me but it is a bit nerve racking to see the thing frozen. The key when upgrading is to use than WM5 rom and upgrade from there.
Guys,
3 days after my first attempt to flash a rom (beside the beatiful palms very long ago).
My first attempt stuck at 19%. After that I stuck in the three color screen. I thought it was a brick now. After searching the forum I could give my kaiser a second live through mtty and 2 commands. yeeh.
But after that every new attempt to flash the three color screen did not appear. When I forced a three color screen (through the camera button) I of course got a connection error.
I'm sure that I'm do something wrong, but I can't live (as a meaning, not for real )with the Idea I cannot put another rom on my kaiser.
I also tried jumpSPL.156, but that won't start on my device (complaining about certificates and or missing components, but in dutch language)
device information
vario iii
rom 1.56.114.4
date 9/1/07
radio 1.27.12.11
bootloader
KAIS130
SPL-3.03.0000
CPLD-8
Hope someone can tell me the right direction.
Regards
Chris Gradussen
These
from the jumpspl 1.56 thread:
jockyw2001 said:
Notes:
1. if when running a JumpSPL an error is shown try to application unlock your device first with SDA_ApplicationUnlock (you must run this on PC with an activesync connection via USB cable). If you still get errors you need to hard reset your device (power off, keep both left and right navigation keys pressed and power on)
Click to expand...
Click to collapse
I hope u'll find a solution in this link:
http://forum.xda-developers.com/showthread.php?t=354061
Thanks,
The hard reset solved evertything!
Okay. I tried to install one of Dutty's ROM's that can be found here: http://forum.xda-developers.com/showthread.php?t=398271.
I read through all the stickys and FAQ's first. I read Dutty's wiki, the Kaiser wiki, and the flashing new ROM wiki. I followed all of the directions and followed Dutty's instructions to the T.
After installing the HardSPL found here(http://forum.xda-developers.com/showthread.php?t=334679), I backed up all my personal info/data.
Then used the Custom RUU Dutty supplied and proceed through the ROM flashing process. Everything went fine and I got no error messages. But when my phone booted up I got a black screen. I waited but my phone stayed on the black screen. So I pressed the standby button on and off a few times and eventually I wound up with a black screen that had about a million multi-colored speckled dots all over it. And I have been stuck on this screen since. I've tried soft-reseting and hard resetting but nothing is working.
I am Using an ATT Tilt BTW.
Please Help me. My phone is my life so right now I'm feeling like Dionne Farris.....Hopeless....
ahh that sounds like a nightmare... wish i could help
klrob33 said:
Okay. I tried to install one of Dutty's ROM's that can be found here: http://forum.xda-developers.com/showthread.php?t=398271.
I read through all the stickys and FAQ's first. I read Dutty's wiki, the Kaiser wiki, and the flashing new ROM wiki. I followed all of the directions and followed Dutty's instructions to the T.
After installing the HardSPL found here(http://forum.xda-developers.com/showthread.php?t=334679), I backed up all my personal info/data.
Then used the Custom RUU Dutty supplied and proceed through the ROM flashing process. Everything went fine and I got no error messages. But when my phone booted up I got a black screen. I waited but my phone stayed on the black screen. So I pressed the standby button on and off a few times and eventually I wound up with a black screen that had about a million multi-colored speckled dots all over it. And I have been stuck on this screen since. I've tried soft-reseting and hard resetting but nothing is working.
I am Using an ATT Tilt BTW.
Please Help me. My phone is my life so right now I'm feeling like Dionne Farris.....Hopeless....
Click to expand...
Click to collapse
can you get into bootloader mode?
hold down power and camera button while inserting stylus it should introduce you to the tri color screen. Please tell us what it states. You may have just experienced a bad flash or you have the radio from hell installed on your device
redbandana said:
can you get into bootloader mode?
hold down power and camera button while inserting stylus it should introduce you to the tri color screen. Please tell us what it states. You may have just experienced a bad flash or you have the radio from hell installed on your device
Click to expand...
Click to collapse
Yes I can get to Bootloader mode.
In the red bar it says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
And Serial at the bottom in the white bar where USB normaly would be.
klrob33 said:
Yes I can get to Bootloader mode.
In the red bar it says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
And Serial at the bottom in the white bar where USB normaly would be.
Click to expand...
Click to collapse
ok soft reset your phone and when it starts up does something like this appear in red text?
r 1.65.20.29
g 25.88.40.04w
d 3.29.xx.xx
please tell me what it says after R
R- 1.58.25.17
klrob33 said:
R- 1.58.25.17
Click to expand...
Click to collapse
well it appears to be a bad flash. unplug your device from the usb cable, restart your computer, and flash again.
Hopefully after your computer restarts it will recognize the device as being connected. If it doesn't just double click on your windows mobile device center icon and it should connect. After connecting just reflash the rom
edit
I had the same problem, what i did was read all through the thread of the ROM or while inside the thread i use the search function and type in the keywords like "blank screen" it happened to me exactly, but i didnt bother to post since i found the answer, 1 user said flash it to WM 6.1 i did exactly that and it helped! some said not necessary, but i didnt see that instruction so i flashed the 6.1 blindly and fortunately it worked...
here is the thread
http://forum.xda-developers.com/showthread.php?t=375583&page=30
on the search function type black screen and you should get and idea what you need to do...
redbandana said:
well it appears to be a bad flash. unplug your device from the usb cable, restart your computer, and flash again.
Hopefully after your computer restarts it will recognize the device as being connected. If it doesn't just double click on your windows mobile device center icon and it should connect. After connecting just reflash the rom
edit
Click to expand...
Click to collapse
I tried that and It different work. I'm trying a whole new ROM now and I hope it works.
Problem solved.
Thanks to everybody for their help.
I just used a different ROM and everything worked perfectly. I guess that ROM just didn't want to work with my phone. But it's okay. The ROM I'm using now is perfect.