I did upgrade in my O2 Neo, but after upgrade rom i´ts don´t turn on
What i cam do ?
O2 Neo is not a Magician, it is a Prophet (I think)
Anyway, we need more infor. What you do use to upgrade, where did you get it from, how do you perform your upgrade, any error message during upgrade, what's the sign now, all dark, hang on a particular screen, etc.
My Pocket is PM300 HTC
I did upgrade, and this show 100% and reset the pocket after upgrade, by this dont work, the screen splash blink only and turn off.
The led Red and Blue is blinks.
I used RomUpdateUtility HTC and the rom image i used Xda_Minis_Upgrade_v2.21.4.101
You used the ROM of a XDA-miniS (aka `Wizard`) to upgrade your `Prophet`. You are seriously screwed. You may have made yourself the most expensive paper weight you ever had.
Anyway, try see if you can boot into bootloader mode (3 colour screen). If you can do that, there are still hope.
My Pocket is PM300 HTC died
This show
IPL 2.21.0001
SPL 2.21.0001
and turn off i can´t update the rom.
What can i do ?
gmarcel said:
This show
IPL 2.21.0001
SPL 2.21.0001
and turn off i can´t update the rom.
What can i do ?
Click to expand...
Click to collapse
I need more details. That do you mean by `This show`? Where is these information shown? in the bootloader (3 colour screen) or the initial screen where your phone freeze. If you were able to get into the bootloader, you might able to get your Prophet ROM into it. Just start on bootloader mode, and plug in the USB. Activesync will not tell you anything, but you ought to able to still upgrade/refresh a Prophet ROM into it (eg running those ROM with EXE).
Can someone confirm if the ROM he used has IPL/SPL in or not?
Mod, can you move this to Prophet section.
More detail
These information shown in the bootloader (3 colour screen)
the initial screen show only O2.
i cant get bootloader, the Prophet only flashes.
The Activesync not tell anything.
I need move this for Prophet ?
gmarcel said:
These information shown in the bootloader (3 colour screen)
the initial screen show only O2.
i cant get bootloader, the Prophet only flashes.
The Activesync not tell anything.
I need move this for Prophet ?
Click to expand...
Click to collapse
Your statements are contradicting. You said you get these information from bootloader screen but you said you can get bootloader?
Anyway, if can get the bootloader screen. Just stay there. Connect it to your PC. And choose a *Prophet* ROM with EXE extension to run on your PC. It works most of the time. For step by step instruction, do a search here. I bet there are lots of similiar cases.
I can´t get bootloader
The screen with three coulours show about 3 seconds and this turn off.
I hope I'm wrong, but if your bootloader is gone, you device is gone. Hope others can help.
Related
i think i have brick my dopod 818pro
have follow the step 1 and install without any error.
then installed the Cert_SPCS.cab and EnableRapi.cab.
then installed the Prophet_4.0.0.0.1_PV rom by running Upgrade_ROM.bat from the computer.
after that restat the device.
AND the phone boot after the HTC Innovation screen and stay at the loader screen.
NOw my screen only showing :
IPL 2.15.0001
spl 2.15.0001
gsm 02.69.21
os 4.0.0.0
and wouldn't boot in ???
anyone here please help
tq
finnally manage to boot in.
redo the step 1 in boot loader mode.
then installed the pdaviet 4.0.0.0.1 from pc
and it is done.
very nice screen
will try it out n c .
tq very much
Hi, how did you manage to solve the issue?
My situation is a little different.
-Load Step 1... ok Successful
-Load Upgrade_Rom.bat... completed
But when I reboot the PDA I just get this screen!!!
Nothing is responding.
PC cant detect the device.
Hard reset also get back to the same screen.
Please help
reboot your device into the bios screen (reset while holding camera button)
at that point i usually just put on the default WM5 comming from QTEK to reestablish operations.
i am using the prophet touch series from gullum and for that i do the following steps after having reestablished the WM5.
Put on PDAViet_TEMP
wait until phone restarts and shows 'Touch to get started'
Put on the Prohvet Touch (VIII or IX Beta)
Hard Reset (Com and Cam button, wait for the message asking to confirm afetr you release the reset button but hold on to com and cam buttons until message pops up) Confirm Hard Reset
So far i repeated this process about 6 times and it works every time
best of luck
need explanation
im planning to buy a dead prophet.....as the seller states...when he posted the pic, it still enters bootloader mode...but it shows
IPL: 1.00
SPL: 2.20.0001
Can this still be repaired? and is this possible? how can i repair it...it is being sold at a very cheap price
I've had similar issues and by just putting the original rom or the WM5 if you can enter bootloader mode thenit comes back to live. Once WM5 which is very stable is loaded, you can upgrade to the WM6 roms. Has always worked for me but it is a bit nerve racking to see the thing frozen. The key when upgrading is to use than WM5 rom and upgrade from there.
I had the Iphone rom and romupdated it with the 8310 raio only rom. Now it only flashes the splashscreen and it turns off. I can't even activesync it to reflash the rom. What can I do??? Please help.
jacknjill said:
I had the Iphone rom and romupdated it with the 8310 raio only rom. Now it only flashes the splashscreen and it turns off. I can't even activesync it to reflash the rom. What can I do??? Please help.
Click to expand...
Click to collapse
can you still get to bootloader?
No more bootloader screen, just a blank white screen.
I had the bootloader screen b4 and tried to reflash it, even though flash was successful, it still turns off after splash screen. So I tried one of the Qtech bootloader roms and flash that, now it's worse than before. I only get a blank white screen when I load the bootloader.
jacknjill said:
No more bootloader screen, just a blank white screen.
I had the bootloader screen b4 and tried to reflash it, even though flash was successful, it still turns off after splash screen. So I tried one of the Qtech bootloader roms and flash that, now it's worse than before. I only get a blank white screen when I load the bootloader.
Click to expand...
Click to collapse
i also got the problem with my sda, it also happened while flashing, do u already found a solution
Guys, are you speek about one subj? Bootloader mode is activated when you start your device with camera button pressed. There is NO white screen - in bootloader mode OS is NOT loading at all! But - you can start re-flashing process as usual
If it works, I recommend you to flash back your native ROM and then check the device. If everything is fine - you know what to do If not - let's continue thread...
And one more thing - are you sure, that your SDA is based on Tornado platform? AFFAIN SDA has two reincarnations - one of them is based on Typhoon platform, other one - on Tornado one. There are a LOT of cases, when people flased Tornado ROM to the first one and had a dead device after it Be VERY carefull!!! And read this thread http://forum.xda-developers.com/showthread.php?t=288498
ZlydenGL said:
Guys, are you speek about one subj? Bootloader mode is activated when you start your device with camera button pressed. There is NO white screen - in bootloader mode OS is NOT loading at all! But - you can start re-flashing process as usual
If it works, I recommend you to flash back your native ROM and then check the device. If everything is fine - you know what to do If not - let's continue thread...
And one more thing - are you sure, that your SDA is based on Tornado platform? AFFAIN SDA has two reincarnations - one of them is based on Typhoon platform, other one - on Tornado one. There are a LOT of cases, when people flased Tornado ROM to the first one and had a dead device after it Be VERY carefull!!! And read this thread http://forum.xda-developers.com/showthread.php?t=288498
Click to expand...
Click to collapse
so in this case, it seems like it's mine, just got a white screen and no bootloader mode
I would be lucky if I can still get into bootloader mode which means there is life left. Now, all I get is a white screen on the Tornado( it's a T-mobile SDA-silver color with bump). I am looking to see if the dealer would be able to revive it. I got a MDA now
About get into bootloader there's enough hints from peoples above. Simply hold camera button while you press the power button, and soon you will see a three color stripped screen, without normal booting splash like "DOPOD". Then you'll be able to flash as you like with RUU of MTTY.
I'm just guessing you've been flashed a Radio version over 02.00.09. As I know, you have to upgrade your IPL version to 2.00 as well as a SPL upgrade to version 2.00.00, for the new RADIO to work. Just a hint you may not noticed.
there's nothing you can do. I had similar experience, went to bunch of services, no one could fix it.
Some one can repair it by "change the code lib", I don't know how to say it in english. But apparantly someone in my city can do it without touch your phone.
ccl13 said:
Some one can repair it by "change the code lib", I don't know how to say it in english. But apparantly someone in my city can do it without touch your phone.
Click to expand...
Click to collapse
That means I have to wait till next year when I head to Guangzhou to do it then.
I have a situation with m600 when powering on theres a green screen like the bootscreen but all green and it only shows ipl spl and os. the operator logo has gone it wont connect to active sync from OS i can get usb bootloader have tried everything apart from the microwave.
Electronburn said:
I have a situation with m600 when powering on theres a green screen like the bootscreen but all green and it only shows ipl spl and os. the operator logo has gone it wont connect to active sync from OS i can get usb bootloader have tried everything apart from the microwave.
Click to expand...
Click to collapse
Why do you put a M600 post in the Prophet forum? (edit: sorry just confused with the device ETEN M600 from Hong Kong here )
1. Anyway, what had you done to your device? .....(edit: message deleted)
Why do you put a M600 post in the Prophet forum?
Click to expand...
Click to collapse
They're the same device damnit!
I have a situation with m600 when powering on theres a green screen like the bootscreen but all green and it only shows ipl spl and os. the operator logo has gone it wont connect to active sync from OS i can get usb bootloader have tried everything apart from the microwave.
Click to expand...
Click to collapse
If you disable connect through USB in activesync, then plugin the device, and then run a WM5 (AKU2.2) No Vendor ROM (Check the Wiki or the FTP server). You should be able to recover your device.
It does sound like a failed upgrade, but it should be fixable.
Electronburn said:
I have a situation with m600 when powering on theres a green screen like the bootscreen but all green and it only shows ipl spl and os. the operator logo has gone it wont connect to active sync from OS i can get usb bootloader have tried everything apart from the microwave.
Click to expand...
Click to collapse
OK,
if your device can fall into the bootloader mode, you can save it easily.
1. force device to bootloader mode manually (please see howto in the link within my signature),
2. ooops, before that, you should had prepared(downloaded) the PVtemp or NVID to flash your device to WM5. (also provided in my thread),
YOU CAN DO IT !!
Electronburn said:
I have a situation with m600 when powering on theres a green screen like the bootscreen but all green and it only shows ipl spl and os. the operator logo has gone it wont connect to active sync from OS i can get usb bootloader have tried everything apart from the microwave.
Click to expand...
Click to collapse
this is very simple
soft reset and press and hold camera button
and upgrade. enjoy it.
Guys,
3 days after my first attempt to flash a rom (beside the beatiful palms very long ago).
My first attempt stuck at 19%. After that I stuck in the three color screen. I thought it was a brick now. After searching the forum I could give my kaiser a second live through mtty and 2 commands. yeeh.
But after that every new attempt to flash the three color screen did not appear. When I forced a three color screen (through the camera button) I of course got a connection error.
I'm sure that I'm do something wrong, but I can't live (as a meaning, not for real )with the Idea I cannot put another rom on my kaiser.
I also tried jumpSPL.156, but that won't start on my device (complaining about certificates and or missing components, but in dutch language)
device information
vario iii
rom 1.56.114.4
date 9/1/07
radio 1.27.12.11
bootloader
KAIS130
SPL-3.03.0000
CPLD-8
Hope someone can tell me the right direction.
Regards
Chris Gradussen
These
from the jumpspl 1.56 thread:
jockyw2001 said:
Notes:
1. if when running a JumpSPL an error is shown try to application unlock your device first with SDA_ApplicationUnlock (you must run this on PC with an activesync connection via USB cable). If you still get errors you need to hard reset your device (power off, keep both left and right navigation keys pressed and power on)
Click to expand...
Click to collapse
I hope u'll find a solution in this link:
http://forum.xda-developers.com/showthread.php?t=354061
Thanks,
The hard reset solved evertything!
Hi,
I have a Qtec S200. G3
Now the problem is that I cannot flash it:
a) Using Softspl: the device screen sometimes turns bright white as it should, but when I start a RomUpdateUtility_NV_G3 it does not find my PDA
It tells to check my USB connections, which are ok.
b) Using Hardspl G3 found here, also at first produced the White screen, and when it came to the rom updating part, next, next, update-> the PDA screen turned black and eventually it could not connect to the PDA, displayed the same USB connection error.
c) Prophet Tools 2.8.3
Hardspl & Softspl are practically unusable, the same thing happens as above, softspl shows promise by entering into the "Bright white screen" state, but even then, when trying to "put" or "update" a rom to the pda in that bright white screen state, it still turns the screen black and does nothing, same connection error as before.
What could be the cause of this?
Any help would be appreciated
Details:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.7.24
Help, anyone?
Help.. i have the same exact type of phone and the same error.. Can't get into SoftSPL and HardSPL doesnt work either. Really tired of WM5, nomatter how good it is
Today i tried to upgrade the IPL from 2.09 to 2.10 but still nothing. When i start the upgrade the phone turns off and wont start again until i pull the batter...
Any if all help would be welcome!
After a year i'm still stuck with this old ROM and the same problem as before.
Bump... Really could use some help on this
Same problem here
My S200 has the same issues.
But today when i tried to upgrade the IPL/SPL to 2.20 it worked and i was even able to hard spl .
I think the problem might be with the battery.Have you guys checked that out?
As for me,i am able to start flashing roms but the phone gets disconnected automatically in between.
I am going to try a whole night recharging and then flashing.
lets see if battery is the villain
my qtek s200 is mad
i tried to upgrade my rom from w to w6,and because i don't know how to do?my s200 has become unusable without charger,when hard reset it doesn't complete install process and it blocked,restarting it works unproperly,bud comands no sound no ...unpluging charger it turns off,battery is full "i'm sure ",but it indicate it empty 0% ???,
how can i syncronise it to pc and it is off
ipl 1.01
spl 2.20.0000
gsm 01.12.10
os 1.5.4.2
pleeeeeeeeeeeeeaaaaaaaaaaase heeeeeeeeeeeeeelp
Tomorrow i will try with my new battery..
Sofar, i know it boots into the 3 colour stripe menu when using RUU program and that's it, program crashes and phone stays the same..
Really hope battery is the solution..
BAttery change didnt do anything, still the same old ... cant upgrade.. anyone know if there is some upgrade block on some models?
BUmp.. the only phone i have been unable to flash is the S200.. ANY advice left in anybody?