Related
I resolved problem from my last topic, but now I have the new one. Every soft or hard reset the phone turns it in to bootloader mode. If i want to quit from bootloader i must remove the battery cover, put it back and plug the charger - this is only way to turn on the device.
I can't upgrade the software, because after device turns in bootloader mode everything hangs up, flash software can't do the job. Also upgrade from SD card dosn't work, MDA can't read it.
I have a warranty, but with changed software it is uselessness
What should I do?
EDIT: I found soft-reset, i can make ib by removing the cover of the battery, as you know cover is connecter with hardware-button which turns device off. I suspect, that in my device soft-reset button and combination for hard-reset (power + soft-reset) have been mapped to bootloader mode. And I must only change this mapping to it's old valutes.
Does anybody know how to do that?
PS. Magician is fully functional, i even restored backup (from ActiveSync)
I have the same problem. Does anybody know how to fix it?
reflashing to the new wm6 lookalike rom worked for me... you can probably try flashing back to the standard 1.13 after that.
Bootloader
The bootloader is damaged and msuffering the same fate. i cannot upgrade or re flash as the computer won't recognise the device, i have a copy of the bootloader file i have downloaded off a website, but don't know how to replace the damaged one with this one.
I may just replace the phone and retire it.
help please
hello everybody, i have a VPA compact vodafone, when i was trying to upgrad it, it switched off, and now there's only usb v1.02 on screen, what can i do, help please
thank u
Hi, help please...
I have Wizard G3 with TNT 5 Touch Flow and tried to update radio T-mobile UK 2.19 Radio Only. update went OK but now on loading I see HTC boot screen then it moves to TNT 5.0 screen and then fades in two minutes and starts back with HTC boot screen. It then circulates like that for ever without passing to the Today screen. On connection with PC for new update with any rom it shows: Error (260) update error. What can be done?
denflorida said:
Hi, help please...
I have Wizard G3 with TNT 5 Touch Flow and tried to update radio T-mobile UK 2.19 Radio Only. update went OK but now on loading I see HTC boot screen then it moves to TNT 5.0 screen and then fades in two minutes and starts back with HTC boot screen. It then circulates like that for ever without passing to the Today screen. On connection with PC for new update with any rom it shows: Error (260) update error. What can be done?
Click to expand...
Click to collapse
it's a case of bad flash,did anything during flash happened like lose usb connectivity,pc crashed,battery discharged or something like unusual ?
Try to soft reset and see if it works,otherwise you'll have to reflash to official carrier's rom in boodloader mode,
1. Disconnect your phone from the usb cable,shut down any firewall,disable any Anti virus,Reboot your PC.
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. On your PC Open windows Task Manager...>Tab Processes...>wescomm.exe...>End process
4. Power off the phone completely (Not stand-by,shut off completely),or you may take the battery out for few seconds
5. Make sure your phone is not Connected to the PC via USB cable and remove the dummy Sdcard or mini-Sd card
6. Get your phone into Bootloader mode (Multicolor screen) by pressing camera button + Power on button
7. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Be sure that your battery is charged over 70%)
8. "USB"will appear on the bottom of the screen of the Bootloader (Multicolor screen)
9. Run the Upgrade again and it will work fine without any problems.
10.Never use Bluetooth sync for the Upgrade
While upgrading, the ActiveSync program will not go on, however the upgrade is running.Please be patient when you're flashing your device, even if 98%. It can wait a little bit, 5 ~ 7 minutes.
Don't cancell the flash or get the phone off the usb cable till it confirms "Congratulations" or stops with an Error!!!
Hope it'll work, Good luck
Hi, this is the first time i saw a Paki guy on this web. I know there is alot of talent in IT profession in Pakistan. Anyway its good to see u here and i got a relief that with the help of a senior member like you i can get my phone work again.
To cut the chase, I have X01HT by Softbank Japan. It is Herms200 by HTC Japanese WM5 ROM. I have installed Asukal's English MUI and it was working fine for me. Now i'm planning to visit Pakistan this month so i though to unlock the sim and i used Prof v3a to unlock. I've successfully unlocked the sim and i guess CID also. When i use some other carrier's sim, i can receive the calls but cant make the calls out coz Softbank rom has a security which comes at screen and ask for password and dont let me do anything on the PDA. After studying alot on this forum i figured that i need to change the rom to get rid of that password message. i used the Olipro's Hard SPL and got bootloader 2.10 Olipro. I checked the other necessary stuff and when satisfied i started rom update. I end up with the same message of Error 260. Now my phone has no OS and it starts at bootloader. i tried everything possible like i make sure to remove all firewalls on my PC, used all the versions of Activesync and everything possible that i could. I trust that there is nothing wrong with the ROM etc but it is with connection.
Now if i update to the original ROM, i'm afraid that it will also upgrade my Bootloader and could never be able to flash english rom. I'm really depressed for the last three days and loosing sleep as well. I trust that you or any other senior member can help me with this.
Thanks in advance and looking forward anxiously.
Farrukh, wrong forum.
You know you have a Hermes, then you should know to post your questions in Hermes related forum, not wizard.
denflorida:
Try to update other Radio-only ROMs in xda's FTP server.
Sorry Brother, i know i have herms but i couldn't find some related topic in herms and i figured that Activesync problem is the same in all devices.
Anyway, thanks for the prompt reply. I'll try to find some from Herms.
Thanks
8125 rom update
i have tried to do a rom update on my 8125 g4. i recently purchased it off ebay and i have two problems. the reason i want to update it is because when i try to enable the wifi my device freezes. the other problem is that i can not seem to get the phone into boot loader mode. i have tried :
-turning the phone off and holding the camera button as i turn it on.
-holding the camera button and pluging it in to a usb port.
- using wizard service tool to enter boot loader mode.
after each of these different attempts i had to either remove the battery for 3 secs or hold the reset button for a few seconds before i can turn it back on. the phone still turns and just i can not use the wifi
Yes!!! Thank you! your instructions worked for me and got me past the Error [260] with my 8125 .
zabardast_1 said:
it's a case of bad flash,did anything during flash happened like lose usb connectivity,pc crashed,battery discharged or something like unusual ?
Try to soft reset and see if it works,otherwise you'll have to reflash to official carrier's rom in boodloader mode,
Click to expand...
Click to collapse
Thanks! Worked for Topaz and latest radio update.
so yea, iono what happened to my mda. i cant seem to turn it on. when i press the reset and camera buttons, it worked before and brought me into bootloader. and that was actually all i could do. now, i cant even get it on, iono whats happened to it. im trying and atempting rigorously to charge it so i can try to fix it. but the charge light dusnt even come on... i dont know what happend. please help me analyzed. i really want to fix this back ._.''
You may need to use the factory charger to charge your device. I keep hearing the problem people experience when trying to charge a completely dead battery with a usb charger. the factory charger is 1amp while usb is half that. that may be why it wouldnt charge.
also, when the phone is in bootloader (tricollor bars) the power does not turn off.
you may need to charge your device completely before turning it on; then flash the original rom to it.
anothor thing about flashing while in bootloader:
If you connect the usb and XP does not recognize it, you have to unplug it, reset the device, then connect the usb again. as soon as you hear the found hardware noise, open the rom upgrade utility. flash. should work.
when posting a question such as this, it helps to provide as much information about the device and the circumstances under which it failed. this being an electronic forum, it is difficult to play detective to find out what you did wrong to mess up the machene.
also remember that it is a machene. it can not ousmart you, but you can outsmart it.
Which is your device,what were you doing when this happened,were you trying to flash a rom ?
bricked Cing. 8125
my device just bricked on my while updating also. not sure why, i use a Cingular 8125. i flashed it to the t-mobile 1.2 rom (like i always do) and then tried flashing it to a new rom and about halfway through it bricked up. now activesync wont even recognize it. how can i fix this?
Bricked up is an over used word on these forums. If it does nothing no lights no charge when you put a fully charged battery in it, then its a brick.
Anyway here is me repeating myself yet again. A Wizard WONT CHARGE A BATTERY without windows mobile running. So charge the battery in another wizard or orbit or buy an external desktop charger /cradle with a spare battery slot or a new battery because it wont charge it
Not really...
Wizard can charge without powered on (when not bricked). It just can't charge if the battery is too flat.
starkwong said:
Not really...
Wizard can charge without powered on (when not bricked). It just can't charge if the battery is too flat.
Click to expand...
Click to collapse
It will charge a completely "flat" or dead battery with the original factory charger. the one that has the output of 1amp, not the usb, which is .5amp
so yea, sorry about this confusing post. sop what i was trying to do was changing my wizard love rom to XM6r5...but i dont know how
what i did was use shelltool and pooped it. but now iono how to really fix it. im still confused now cuz i cant boot up at all. i can get into the bootloader r/g/b screen
but iono how to fix it from there
sound to me like you may not have unlocked your device?
maybe.
try this: reset your phone with the reset button;
put it in bootloader (tricolorscreen) reset holding the camera button while untill it is in bootloader;
plug in the usb;
run the update utility.
as it updates, it will seem to freeze at 100%. do not unplug it.
I recomend you flash the love rom first.
but it says it cant even connect when i pplug my usb to the pc and device
th pc dun really "see" it
and the ruu, dont you need active sync on as well or sumthin? nothin shows up
m1k0e said:
but it says it cant even connect when i pplug my usb to the pc and device
th pc dun really "see" it
and the ruu, dont you need active sync on as well or sumthin? nothin shows up
Click to expand...
Click to collapse
try reseting it. then put it into bootloader; then plug it in; then run the flasher.
if you unplug it while it is in bootloader, then plug it in again it will not read.
exit everything (meaning flashing utility unplug usb; reset phone)
then try it again.
just a side note, dus it matter which ruu im using to do this? or should i use the wizard love first?
okayt so i have tried it, but curiously, how do i know if its actually working when i do that? cuz everytime im in bootloader and open ruu, it goes at first, but the status dusnt move past 0% and then an error message comes up. does it matter ifi supposedly have other programs open in the b/g?
I think it matters which ruu you are using depending on if you have a G4 or G3.
If you have a g4 then use the ruu for a g4.
the guy who designed the wizard service tool would know.
I would flash to the factory rom though to fix any issues first.
what is your IPL SPL? G3 or G4?
well, at least we know that your phone is not bricked. It will get fixed under the right circumstances.
It could be that your battery is not charged all the way.
remove the battery, then put it back in. charge it fully (overnight) and try to flash it to the factory rom.
well i upgraded my rom to wizard love previously, so apparently its a g4 now. i want to upgrade to the XM6r5 ruu but im not too sure.
maybe u could help locate me a few stable and nice roms for g4?
but thanks so far
when i run the RUU, i keep getting an errormessage 260, saying it cant connect my phone to the pc.,..
have you gotten it unbricked yet?
need more infoon your phone and it's current state.
everytime you post a message (it seems) you do not give enough information.
ipl spl current rom ...
I dont know any of these things. untill I do, I can't help you.
If you search the G4 forum you will find information on flashing your phone if it is a G4. (you may need to soft spl or hard spl your phone) look to the G4 forum for information for that.
just because it had the love rom does not mean that it is a g4. all roms that have OS ONLY can be flashed to a G4. If it has SPL/IPL (bootloader) Or extended roms can not be flashed to a G4
oh. haha sorry. now it just boots straight into the bootloader with "ruu" on the upper right hand corner.
ipl is 2.26.0001
spl is 2.26.0001
m1k0e said:
oh. haha sorry. now it just boots straight into the bootloader with "ruu" on the upper right hand corner.
ipl is 2.26.0001
spl is 2.26.0001
Click to expand...
Click to collapse
Its a G4,you can only upgrade through either SoftSPL or HardSPL,read about this in the G4 sub-forum posted as stickies.
but how would i use hardSPL thru only bootloadeR?
update: everytime i restart my phone, it keeps booting up into the bootloader screen with "RU" on the upper right of the screen
m1k0e said:
but how would i use hardSPL thru only bootloadeR?
update: everytime i restart my phone, it keeps booting up into the bootloader screen with "RU" on the upper right of the screen
Click to expand...
Click to collapse
ok,download official carrier's rom, get into Bootloaders,hook up the phone with pc via usb,Now Check,if small usb appears at the bottom of the Bootloader screen,if its there than Run the Ruu in the rom to flash it,but if it doesn't appear,its not establishing connection with pc and phone.There might be a connectivity problem,it cud be usb cable,mini usb port of the phone or usb input of pc.
Yes! you can only do HardSPL if its working normal,you can even try to flash wizard_love rom and if it flashes,then go for HardSPL.but official carrier's rom will be more appropriate and recommended,it will also remove any Extended_Rom corruption,if any.
So,i upgraded my i-mate jamin whit touchflow 3d lookII,and before the upgrade is finish i got a message: update error!!!!!!!!!! And now my pda is dead,no flashing the led when i connecting the pc,and if i want to run the original rom back the program say:connection error! I can't do hard reset because my pda don't want switch on!
Please if somebody can,help me.
play007 said:
So,i upgraded my i-mate jamin whit touchflow 3d lookII,and before the upgrade is finish i got a message: update error!!!!!!!!!! And now my pda is dead,no flashing the led when i connecting the pc,and if i want to run the original rom back the program say:connection error! I can't do hard reset because my pda don't want switch on!
Please if somebody can,help me.
Click to expand...
Click to collapse
wait we need more Details id you try leaving the phone charging then take battry out and put it back in? also does the Device power on? I mean do you see the qtex screen you know the boot screen? also try putting it in bootloader mode then flash
__________________
Thank you very much for your help.I tried everything, which you wrote, already. I cannot switch the device on. If I put it on a charger then sometimes automatically onto 2-3 seconds the bootloader appears,afterwards turns off.
He responds to nothing without a charger.Sorry for my bad english.
play007 said:
Thank you very much for your help.I tried everything, which you wrote, already. I cannot switch the device on. If I put it on a charger then sometimes automatically onto 2-3 seconds the bootloader appears,afterwards turns off.
He responds to nothing without a charger.Sorry for my bad english.
Click to expand...
Click to collapse
My Prophet has same symptom as yours. After 2 nights of charing, it now turns to charging light on all the time, no bootloader screen. After charging 1 day, it still on charging lamp. still cannot turn on, still cannot connect with PC.
what happens
Hey guys looks like a bricked my 2 week old Sprint Touch Pro 2. I can't get pass the touch pro 2 logo screen now and I'm very upset with myself. Is there a way to possible unbrick the phone. I tried to sync it with my PC no response. Also i did back it up with " Microsoft My Phone " earlier in the day and its backed up on WMDManager too. I will try to take it to sprint for warranty and see what the will do. HAPPY NEW YEAR people!!
clariceave said:
Hey guys looks like a bricked my 2 week old Sprint Touch Pro 2. I can't get pass the touch pro 2 logo screen now and I'm very upset with myself. Is there a way to possible unbrick the phone. I tried to sync it with my PC no response. Also i did back it up with " Microsoft My Phone " earlier in the day and its backed up on WMDManager too. I will try to take it to sprint for warranty and see what the will do. HAPPY NEW YEAR people!!
Click to expand...
Click to collapse
Depending on what happened, it's a yes/no situation. What did you do?
Try this:
get into bootloader mode (tri-color screen): Take out the battery for one minute. Put it back in. Getting into bootloader mode is done by holding the Volume down button while you do a press/release of the Reset button. OR hold the Volume down button while you do a press/release of the Power button.
That should get you to bootloader mode. Now, plug in your USB to the PC. Flash a CDMA ROM from there by running the .exe. If you cannot do that, transfer the .nbh file (rename it to "RHODIMG.nbh" [no quotes]) and follow these instructions.
Good luck, and happy new year!
*The majority of the CDMA ROMs can be found at PPCGeeks*
PLEASE HELP ME UNBRICK MY TOUCH PRO 2 (tmobile)
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
foxxyroxy5 said:
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
Click to expand...
Click to collapse
Well, this forum is for CDMA TP2s, but I'll help.
So you took out the battery for at least one minute? Then you put it back in. Get into bootloader mode (T-Mobile version: phone is off, hold the Volume Down button while you press/release the Power Button. Keep holding the Volume Down button until the colorful screen shows up).
When you're in bootloader, plug in your TP2 to your PC. Now run the .exe of a GSM ROM and follow the steps, as if your phone is synced to the PC. (aka flash as you would usually do).
To flash via the Storage Card: On your PC, go to Start > My Computer > Removable Disk drive (something like that; make sure this is your phone's Storage Card). Drag the .nbh of a GSM ROM there. Rename the .nbh "RHODIMG.nbh" (no quotes). Unplug your Phone. Take out the battery again for one minute. Now, go back into bootloader (hold Volume Down button and press/release Power button [keep holding the Volume Down button]). Follow the steps to flash the phone.
Good luck.
RE:LEASE HELP ME UNBRICK MY TOUCH PRO 2 (tmobile)
Thank you very much for helping me with my TP2 problem! You were my last resort and i was going to give up. It works perfectly fine! I really really appreciate it! THANK YOU AGAIN
Should work
foxxyroxy5 said:
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
Click to expand...
Click to collapse
You did exactly the reverse of what I did, and the instructions already given are how I resolved it: put it in bootloader and flash a compatible ROM. I flashed a stock ROM just to be sure, but that's probably not needed.
foxxyroxy5 said:
Thank you very much for helping me with my TP2 problem! You were my last resort and i was going to give up. It works perfectly fine! I really really appreciate it! THANK YOU AGAIN
Click to expand...
Click to collapse
No problem. Enjoy your unbricked TP2 this new year!
Bricked my Sprint Touch Pro 2
i downloaded a hotfix for internal gps from htc website for Sprint touch pro 2. after i tried to install it the phone went off and now it won't even power on or go to boot loader.. any suggestions on how i can fix this i was using Mighty Rom 6.5 with htc sense 2.1
[email protected] said:
i downloaded a hotfix for internal gps from htc website for Sprint touch pro 2. after i tried to install it the phone went off and now it won't even power on or go to boot loader.. any suggestions on how i can fix this i was using Mighty Rom 6.5 with htc sense 2.1
Click to expand...
Click to collapse
See if you can do a hard-reset right now. While phone is off (which it is), press and hold Talk/Send, End, and Power button at the same time. Wait for a screen to pop-up. Follow steps to hard reset. That will bring it back to factory defaults.
If it doesn't work, maybe you could post your question on PPCGeeks, where a lot of CDMA people go. They might be able to help you.
Can you Unbrick a Touch Pro 2
Hi to all,
I'm a new here and a little desperate . I flashed my rom by using a raphael update instead of Rhodium. My phone got bricked. My phone is a Sprint HTC touch pro 2.
At the moment, it will not boot, when I plug it to my computer and it was looking for qualcomm cdma MSM drivers.
I tried sof and hardware reset including the boot loader. Nothing works. I also tried using different RUUs. Nothing works. I hope somebody can help me.
Fixed the problem...bought an android...ha,ha...
smileyzst said:
The same exact thing happened to my tp2.Accidently flashed touch pro(RAPHEL)rom and now nothing!!It won't power on or anything,can someone help me too...Is my phone bricked???? Help please!!!
Click to expand...
Click to collapse
Well if you can power it on, and go to bootloader, then your phone is just fine. Just flash a Rhodium ROM.
I suggest take battery out, and put it back in after few seconds, to see if it powers on. If not, leave it in the charger, and see if it powers on.
After installing the HardSPL, I decided to flash my US Cellular CDMA phone with a GSM rom and of course it bricked it. The phone would only boot to bootloader, so I was going to have it repaired for $70. But if I was willing to flash my device, then I'm sure as willing to look for a DIY solution somewhere. Goodthing I searched this forum, because the answers where right here!
Just format your microSD to FAT32, install an extracted stock ROM kit to the root of the SD insuring you rename the .nbh to RHODMIG.nbh and place the other extracted files on the SD as well. Place the microSD in your HTC Touch Pro2 and boot to bootloader. You may have to take steps to get to the bootloader, mine booted to bootloader automatically anyway at that point. Follow onscreen instructions, and your Touch will be as good as new!
thanks a million for helping me unbrick my tp2
wow man thanks a million, i followed the instru and it worked but was slow so i did task 29 and flashed the rom i wanted and it works great, i really appreciate your help on this
How did you get to the bootloader menu. I am using CDMA HTC Pro 2 by Sprint. Thanks
goldenu said:
You did exactly the reverse of what I did, and the instructions already given are how I resolved it: put it in bootloader and flash a compatible ROM. I flashed a stock ROM just to be sure, but that's probably not needed.
Click to expand...
Click to collapse
@rocco24
Did everything go alright? If not, just post here or send me a PM.
Hi i have a different issue I accidentally flashed the wrong nv items 01192 and now its rebooting. if someone can dump their tp2 sprint 6.5 nv items please help. I am cut off from the world of cell phones at the time. I read that i also would need the radio dump which in my case is the same one on the 6.5 ruu windows version. any feed back or advice is welcome. please help guys.
Oscar
sumflipnol said:
Well, this forum is for CDMA TP2s, but I'll help.
So you took out the battery for at least one minute? Then you put it back in. Get into bootloader mode (T-Mobile version: phone is off, hold the Volume Down button while you press/release the Power Button. Keep holding the Volume Down button until the colorful screen shows up).
When you're in bootloader, plug in your TP2 to your PC. Now run the .exe of a GSM ROM and follow the steps, as if your phone is synced to the PC. (aka flash as you would usually do).
To flash via the Storage Card: On your PC, go to Start > My Computer > Removable Disk drive (something like that; make sure this is your phone's Storage Card). Drag the .nbh of a GSM ROM there. Rename the .nbh "RHODIMG.nbh" (no quotes). Unplug your Phone. Take out the battery again for one minute. Now, go back into bootloader (hold Volume Down button and press/release Power button [keep holding the Volume Down button]). Follow the steps to flash the phone.
Good luck.
Click to expand...
Click to collapse
I wonder if you can help me; i have a sprint hybrid cdma/gsm and it has black screen no lights at all but the qualcomm cpu is easily recognized by pc-have tried all known methods to get in bootloader but i get no lights at all??-have fully charged batt from another tp2=any experience w this problem?-thanks
keeps rebooting?
Hello, I'm wondering if anyone has experienced the problem I'm facing:
I have the latest Energy rom, with Android 2.3 on SD card. Android proved to be quite unstable and requires soft resets every now and then. Most of the time I would let it boot into WinMo and then run Haret again to get into Android.
Yesterday I left in running in Android all day, and in the evening I noticed the phone had died. Thinking it was just out of battery, I just plugged it in, let it charge for a few hours, then tried to boot it up. But it just kept rebooting, never getting pass the Touch Pro 2 boot screen.
Did hard resets twice, same thing. Re-flash the rom, same thing. Took out SD card, flashed again, same thing. Everything I tried, it would not get pass the initial boot screen, and just cycles the reboot again. Oh by the way, the hard resets and re-flashes are all successful with no errors.
Anyone have a solution to this? Thanks!
velo25 said:
Hello, I'm wondering if anyone has experienced the problem I'm facing:
I have the latest Energy rom, with Android 2.3 on SD card. Android proved to be quite unstable and requires soft resets every now and then. Most of the time I would let it boot into WinMo and then run Haret again to get into Android.
Yesterday I left in running in Android all day, and in the evening I noticed the phone had died. Thinking it was just out of battery, I just plugged it in, let it charge for a few hours, then tried to boot it up. But it just kept rebooting, never getting pass the Touch Pro 2 boot screen.
Did hard resets twice, same thing. Re-flash the rom, same thing. Took out SD card, flashed again, same thing. Everything I tried, it would not get pass the initial boot screen, and just cycles the reboot again. Oh by the way, the hard resets and re-flashes are all successful with no errors.
Anyone have a solution to this? Thanks!
Click to expand...
Click to collapse
Try flashing another ROM or try putting in another battery and see if the bootloop issue goes away. Kindly update the status of your post if you fixed the issue or are still having problems.