Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Hello everyone,
i'm trying to update my universal(T-mobile MDA Pro version) to WM6. I've tried every guide I found here, read the whole wiki and googled hours and hours for error 222. No solution...
I'm stuck at the first step when I'm installing Button 1.05 ROM. Every time I run it I get error 222 (Device is not responding).
The phone was already SIM unlocked when I got it and bootloader ver. says 1.01. SIM and memory cards are not in the phone.
I've provided more info below. Also tried with few difrent cables on difrent computers... Always error 222.
I would very much appreciate every help you can provide...
Thx
------------------------------------------
Some info from WST
Wizard Service Tool v4.2.2
05/09/08 15:58:23
CPU Manuf. FAILED
IMEI:
=> Bootloaders:
IPL: (G3 device)
SPL date unknown
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 0.0
Registry AKU: .2.0.0
Radio values FAILED
=>Extended_ROM:
Version: UNLOCKED
Name: Extended_ROM
Status: visible
=> Drives and partitions:
|--Handle--|---Size---|
33ef0c1a - 1.89G (0x79120e00)
d3d6540a - 9.99M (0x9fd800)
33e2010e - 44.43M (0x2c6dc00)
f3e71212 - 56.75M (0x38c0000)
13e71026 - 3.19M (0x330000)
f3e71002 - 3.06M (0x30fc00)
=> DOC chip unique ID:
0000000084180102153903ee0e0605d0
Key Index: 26
All Done.
------------------------------------------------
Info from Device Information:
ROM version: 1.30.115 WWE
ROM date: 4.17.06
Radio version:1.10.03
Protocol version 42.44.P8
ExtROM version: UNLOCKED
-----------------------------------------------
No ideas?
I have yet another question. Since this is a T-mobile, after a hard reset it installs a bunch of custom programs. Is there a way to stop it from doing this? Clear out ext rom?
EDIT : Don't bother. Maneged to solve it.
d3v123 said:
No ideas?
I have yet another question. Since this is a T-mobile, after a hard reset it installs a bunch of custom programs. Is there a way to stop it from doing this? Clear out ext rom?
EDIT : Don't bother. Maneged to solve it.
Click to expand...
Click to collapse
Use an extended rom unlocker first and then hard reset. After that you will have access to the extended rom. Delete whatever and agian hard reset...
For your first problem try to unlock your phone completely.
thx 4 second...
As for first, that's what I'm trying... I can't CID unlock it with WST (it says that my DOC chip is locked). In various wiki guides i'm suppoused to flash the button 1.05 rom first, but i can't do it because of error 222.
I've found this link with some tools to unlock the device. Which tool should I use to CID unlock it?
In topic about tomal's new memory card flashing there was a suggestion to CID unlock with this. I thought it was only for SIM unlocking. Can I use it to CID unlock as well?
Aplogies for the re-post (I imagine it will be) but trawling through the search results of nearly 900 pages would 've taken a while LOL.
I have no phone service on my Orange SPV M1500.
I cannot get the phone to work. I am using an ORANGE PAYG sim. No progs relating to the phone work either.
Phone boot info is
R = 20000
G NONE
D 1.11.00 WWE
Full device Info
Op ver = 3.11.1.167
ROM ver = 1.11.00 WWE
ROM date = 01/27/05
Radio ver = 20000
Protocol ver = NONE
ExtROM ver = 1.11.167 WWE
Identity model number = PH10D
Is there any way of getting the phone to work?
Please help,
Scott
I flashed the firmware LG G2X 2x-v10b-1300166062-NVFLASH!
Now I do not know how to restore the original firmware!
Who can help me or give ROM under NVFLASH?
ILUHA_89 said:
I have sewed LG G2X an firmware 2x-v10b-1300166062-nvflash!
Now I don't know how to recover an initial firmware!
Who can help me, or will give ROM under NVFlash
Click to expand...
Click to collapse
Its a little hard to understand what you're asking but if I'm understanding correctly then you're saying you flashed the 2x-v10b-13...... firmware to your phone. Am I correct? If so then you've definitely screwed up your G2X because that firmware appears to be for the O2X(P990) and not the G2X (P999) which would mean you have altered your partitions and flashed a baseband that's incompatible with your phone. Even if you recreate your partitions correctly, I'm not aware of any straightforward way of replacing the baseband with the proper one. I haven't seen any flashable basebands for the G2X.
Someone else wanna chime in here?
Does your phone even boot?
Yes, you understood correctly!
Phone is loaded but not running a network and not see the battery!
I even made a CWM and put CM7
But exactly the same result no network and not see the battery
Did you wipe correctly? Boot into ClockworkMod, and select Mounts and Storage.
Here's what I do.
-Format System
-Format Cache
-Format Data
Then wipe Dalvik Cache...
After that, flash any ROM you'd like... Boot into the ROM, and perform a Factory Reset.
And another question why he does not want sewn through SmartFlash!
Throws:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:22.1 Sec :Timeout error is occured
00:22.1 Sec :error!
I install [ROM] Stock NANDROID Restore Froyo 2.22 Rooted LG-P999-V10f 4-23-2011
Phone does not boot (boot animation and restart)
I think I have a way you can fix it. Check out the thread about fixing a soft-bricked phone. Use the KDZ program to flash the new GB rom for the G2X. When the KDZ program starts DO NOT click detect device. Instead just click to immediately start the update. This should flash your phone with the current firmware and the new baseband. Make sure you have the latest LG T-Mobile USB drivers installed on your computer.
http://forum.xda-developers.com/showthread.php?t=1180331
Thank you!
I will try restoring!
ILUHA_89 said:
Yes, you understood correctly!
Phone is loaded but not running a network and not see the battery!
I even made a CWM and put CM7
But exactly the same result no network and not see the battery
Click to expand...
Click to collapse
Sorry I missed the replies here. So the phone was booting up but with no network or battery detected. And looks like you tried flashing cm7 and performing a nandroid restore of the stock 2.2.2 firmware and now won't boot but gets stuck in a boot loop. Is that all correct?
I'm almost certain that your original issue is that you flashed a rom designed for the Optimus O2X (P990) and not the G2X (P999). If that's the case then a simple nandroid restore or flashing any rom won't work to fix your phone as far as I know. You might have some luck with the kdz flasher but I don't know.
If you CAN boot into your phone then go to Settings > About phone and tell us what it says there in regards to Model number and Baseband.
The KDZ method is a full flash like an OTA. If it works, and I think it will, the correct baseband will be flashed.
Sent from my LG-P999 using Tapatalk
jboxer said:
I think I have a way you can fix it. Check out the thread about fixing a soft-bricked phone. Use the KDZ program to flash the new GB rom for the G2X. When the KDZ program starts DO NOT click detect device. Instead just click to immediately start the update. This should flash your phone with the current firmware and the new baseband. Make sure you have the latest LG T-Mobile USB drivers installed on your computer.
http://forum.xda-developers.com/showthread.php?t=1180331
Click to expand...
Click to collapse
Not it is got!
KDZ log:
[R&D Test Tools Log File]
14:48:44 : Launching SW update
14:48:44 : Unpacking KDZ
14:48:53 : KDZ file extraced
14:48:58 : Files were extracted.
14:48:58 : LGMobileDL Load.
14:49:09 : Port = 0
14:49:20 : Connecting to phone
14:49:31 : Check Phone mode = 2
14:50:09 : Phone type check.......
14:50:11 : _DetachDLL Call
14:50:11 : _DetachDLL Call End
14:50:11 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
14:50:11 : Param : moduleDir =
14:50:11 : Param : waitTime = 0
14:50:11 : Param : UsbHighSpeed = 1
14:50:11 : Param : PhoneMode = 2
14:50:11 : Param : BinVersion = V21E_00
14:50:11 : Param : AuthMark = 0
14:50:11 : Call fn_StartUpgrade
14:50:33 : CDMA: wParam = 2007, lParam = 0
14:50:33 : Model Dll Msg Not Found(2007, 0)
14:50:33 : CDMA: wParam = 2008, lParam = 8
14:50:33 : Model Dll Msg Not Found(2008, 8)
14:50:33 : CDMA: wParam = 2005, lParam = 0
14:50:33 : Model Dll Msg Not Found(2005, 0)
14:50:33 : CDMA: wParam = 2003, lParam = 16
14:50:33 : Model Dll Msg Not Found(2003, 16)
14:50:33 : CDMA: wParam = 2005, lParam = 1
14:50:33 : Model Dll Msg Not Found(2005, 1)
14:50:33 : CDMA: wParam = 2009, lParam = 1
14:50:33 : Model Dll Msg Not Found(2009, 1)
14:50:33 : CDMA: wParam = 2005, lParam = 5
14:50:33 : Model Dll Msg Not Found(2005, 5)
14:51:06 : CDMA: wParam = 2010, lParam = 3015
14:51:06 : Model Dll Msg Not Found(2010, 3015)
14:51:06 : CDMA: wParam = 2010, lParam = 3015
14:51:06 : Model Dll Msg Not Found(2010, 3015)
FatalityBoyZahy said:
Did you wipe correctly? Boot into ClockworkMod, and select Mounts and Storage.
Here's what I do.
-Format System
-Format Cache
-Format Data
Then wipe Dalvik Cache...
After that, flash any ROM you'd like... Boot into the ROM, and perform a Factory Reset.
Click to expand...
Click to collapse
All have done as You have said!
But smartphone does not want be loaded!
phburks said:
Sorry I missed the replies here. So the phone was booting up but with no network or battery detected. And looks like you tried flashing cm7 and performing a nandroid restore of the stock 2.2.2 firmware and now won't boot but gets stuck in a boot loop. Is that all correct?
I'm almost certain that your original issue is that you flashed a rom designed for the Optimus O2X (P990) and not the G2X (P999). If that's the case then a simple nandroid restore or flashing any rom won't work to fix your phone as far as I know. You might have some luck with the kdz flasher but I don't know.
If you CAN boot into your phone then go to Settings > About phone and tell us what it says there in regards to Model number and Baseband.
Click to expand...
Click to collapse
There "unknown radio module" is written
jboxer said:
The KDZ method is a full flash like an OTA. If it works, and I think it will, the correct baseband will be flashed.
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
OneClickRecoveryFlasher gives such picture!
Then you killed it by flashing wrong firmware. No other way to flash the correct baseband.
Sent from my LG-P999 using Tapatalk
I solved my problem myself!
I made a firmware for NVFlasher and sent it directly to your phone!
ROM G2X to lay out and who may later come in handy!
ILUHA_89 said:
I solved my problem myself!
I made a firmware for NVFlasher and sent it directly to your phone!
ROM G2X to lay out and who may later come in handy!
Click to expand...
Click to collapse
I and many others would like to know how you set up firmware for NVFlasher for the 999 and the commands to use it.
My phone was bricked by LGupdater, and could not update/restore it with KDZ -(repeatedly indicated fatal error). Out of desperation, I used a script tool from modeco.com that flashed 990 firmware. I then had a 990 device - lol.
I then tried Smartflash to restore the stock 999 firmware (CP.bin and AP.bin), but it would not do the CP.bin file It did flash the AP.bin file, which is the ROM, but did not restore the partitions and baseband with the CP.bin file. So I put stock recovery back on it and got a replacement. It looked like stock in settings, but baseband was "unknown".
I spent days on this and looked and inquired everywhere - but there was NOTHING in XDA nor modeco.com about how to restore a 999.
So please respond and detail your procedure.
Lay out in the evening a description and a link to the firmware!
ILUHA_89 said:
Lay out in the evening a description and a link to the firmware!
Click to expand...
Click to collapse
Looking forward to it.
The following is my Touch Firmware Version:
ic_fw_identifier = PLG208 - 1
ic_fw_version = E067
img_fw_product_id = PLG208
img_fw_version = E067
ic_chip_rev = 2
bootloader_fw_ver = 0
lcd_panel_type(boot) = 0
lcd_panel type(current) = 0
Those of you with a black, tmobile G2, can you tell me if you're on the same touch firmware (via the hidden menu). -> 3845#*801#
My touchscreen is completely non functional after the latest knock-code update from Tmobile. I suspect that its my touch firmware (perhaps being old, and not upgrading?). I have rooted, reflashed multiple versions images, and returned it to completely stock via the flash tool using a few KDZ files. Nothing is working.
Would like to compare what other's touch firmware version is, and if possible, do a manual upgrade of my touch firmware.