Database Info

GENERAL COUNTRY ID ERROR WORKAROUND: IT WORKS ALL DEVICES!!!

Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye

Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.

xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?

ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck

where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help

this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.

crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11

guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....

not working in Qtek S100 any idea????

it works on S100 / jam / mda c
i tried several images with several devices!
good job!

crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel

problem with with 5._Underground_edition_Crossbow_ROM.exe

hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.

u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition

but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.

You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).

thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.

Can't upgrade OS BUT phone is unlocked!

So I been trying to upgrade my OS to the tnt 1437, however every time I try my old OS keeps popping up (OS: 5.1.xxx (Build 15671FARIA.3.5)) ... so for the last 3 days I been trying to search this site for any answers, however all I get is that only happens if the CID is locked, but my phone isn't 1) I unlocked it before to upgrade it in the first place to the above mentioned OS and 2) I checked its status with the Wizard Service Tool (which is AWESOME). So i'm at a lose here as to why every time I either upgrade or downgrade the ROM the same OS keeps showing up. BTW Everything else I can upgrade except the OS. Any help is appreciated. thanks!

Anyone? Anything?

Did you remember what version of IPL and SPL when you unlock your Wizard? It is only unlockable when IPL and SPL is 1.xx (i.e. Downgrade to Button's ROM first). You may post your WST log here for more chance to know what the problem is.

Here you go here is the log:
Wizard Service Tool v4.2.1
12/11/07 23:07:22
CPU Manuf. FAILED
MODEL: Wizard
=> Bootloaders:
IPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
Getting more info...
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio values FAILED
=>Extended_ROM:
Version: faria V4.0
Name: Extended_ROM
Status: hidden
Getting drives,disks and partitions info...
=> Drives and partitions:
|--Handle--|---Size---|
6e9d5352 - 9.99M (0x9fd800)
eea9813a - 48.23M (0x303c000)
2fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
cfb23fb6 - 3.06M (0x30fc00)
All Done.

Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?

kegobeer said:
Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?
Click to expand...
Click to collapse
Yes I tried both the button ROM and the love ROM with no change ... On another note I can change the IPL and the SPL with no trouble however the OS always stays the same.

Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?

kegobeer said:
Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?
Click to expand...
Click to collapse
I just tried what you mentioned however I got the following error when I was doing the ROM update .... fyi I got it from the tmobile site ... when I ran the rom update I got:
error [326]: invalid command
this nbf file cannot be used for your pda phone. please check your nbf file.

It looks like you originally skipped the 2.26 rom. I did the same thing the first time I flashed a rom. Try flashing back down to the Button rom, then to the 2.26, then the tnt 1437. It worked for me.

Am I doing something wrong here cause every time I try some downgrade its always the same OS that shows up ... 3.3.0.0 that NEVER changes, everything else does.

i have the same problem..

8125hacker said:
i have the same problem..
Click to expand...
Click to collapse
What OS does your phone boot with?

bad flash rom, you need junk the phone or donate to XDA-developers

first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys

da_jojo said:
first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys
Click to expand...
Click to collapse
Out of curiosity when I downgrade to any of these roms am I looking for the OS to downgrade or just the IPL/SPL?

cgigate said:
bad flash rom, you need junk the phone or donate to XDA-developers
Click to expand...
Click to collapse
how is it a bad flash rom if the IPL/SPL and GSM all change everytime i change roms. The only thing that doesn't is the OS.

Radio problem

After solving the NO GSM problem, unlocking the CID (whit HTC_Universal_Radio_for_SIMunlock_v0.00.00).
I have flashed the new rom and radio, everything was ok (making calls, internet, etc), until next morning!!!!
This is not the first time. After flashing everything is ok, next morning NO GSM.
Can someone help me on this problem?
Tanks,
Rui Rego

ruirego said:
After solving the NO GSM problem, unlocking the CID (whit HTC_Universal_Radio_for_SIMunlock_v0.00.00).
I have flashed the new rom and radio, everything was ok (making calls, internet, etc), until next morning!!!!
This is not the first time. After flashing everything is ok, next morning NO GSM.
Can someone help me on this problem?
Tanks,
Rui Rego
Click to expand...
Click to collapse
Perhaps flashing just radio to another version
In the Wiki are different radios and how to
Good luck,

orb3000 said:
Perhaps flashing just radio to another version
In the Wiki are different radios and how to
Good luck,
Click to expand...
Click to collapse
I just can't make an RADIO upgrade... It always fails???
I have tried in XP and VISTA, in diferent computers, etc.
Rui Rego

Radio test?? Help here please
My universal is crazy. Now, sometimes the radio appears on the splash screen and I have phone, sometimes is NO GSM and no phone.
Is there any way to test the RADIO, maybe whit MTTY. I need to know if it's broken for ever so I can quit solving this problem.
Thanks,
Rui Rego

Have you tried flashing to a different ROM and radio?

orb3000 said:
Have you tried flashing to a different ROM and radio?
Click to expand...
Click to collapse
Yes, I haver tried all RADIO version's. And a lot off different ROM's
Rui Rego

how about to cleaning your pin hardware, i mean the pin at the slot for sim card. and cleaning the surface of your sim card too. hope it work.

Have you tried a different SIM? (Just to make sure it is the UNI).

MTTY
Hi,
There are a few basic tests you can run for the radio stack in MTTY.
Details are in the Wiki, but I'll post them here for you too.
Code:
[B]
rtask command[/B]
rtask seems to accept either just a type, or a value. (two hex arguments)
type possible values description
0 ? Resets radio
1 ? tells you to use 3 or 4 instead
2 ? Turn radio off
3 ? Runs radio image
4 ? Runs radio bootloader
7 ? Allows you to debug AT commands.
a ? Talk to GSM bootloader.
b ? Radio AT Command Debug. Talk to GSM AT cmd interface.
I would also advise trying a DOC format and complete ReFlash, it may be that the DOC has become corrupted and thus fails to load the radio stack.
Cheers,
Beasty

indrastrid said:
how about to cleaning your pin hardware, i mean the pin at the slot for sim card. and cleaning the surface of your sim card too. hope it work.
Click to expand...
Click to collapse
Hello, I have already done that. Inclusive, I have cleaned all my universal with the cleaning spray.
Thanks Rui

JonMorgan said:
Have you tried a different SIM? (Just to make sure it is the UNI).
Click to expand...
Click to collapse
I didn´t did that but my SIM is new. Besides that, the problem is that on the splash screen it says NO GSM, with or without the SIM, so I think that it's not related to the SIM. When everything is ok, I had the RADIO version on the splash screen without the SIM.
Thanks
Rui
PS-maybe this is the end of my UNI...I think the next will be the iPhone

beast0898 said:
Hi,
There are a few basic tests you can run for the radio stack in MTTY.
Details are in the Wiki, but I'll post them here for you too.
Code:
[B]
rtask command[/B]
rtask seems to accept either just a type, or a value. (two hex arguments)
type possible values description
0 ? Resets radio
1 ? tells you to use 3 or 4 instead
2 ? Turn radio off
3 ? Runs radio image
4 ? Runs radio bootloader
7 ? Allows you to debug AT commands.
a ? Talk to GSM bootloader.
b ? Radio AT Command Debug. Talk to GSM AT cmd interface.
I would also advise trying a DOC format and complete ReFlash, it may be that the DOC has become corrupted and thus fails to load the radio stack.
Cheers,
Beasty
Click to expand...
Click to collapse
hello,
I have tryed the task b and had this information:
rtask b
Radio AT command debug with security check.
Read singal error D5
SD read fail!
Wait interpeter timeout
AUX_Process- FAIL, reason 2, dwRead=0, dwWritten=41
Can we know somwthing from here?
Is the DOC Format the command task 28 55aa? if it is Ia have already tryed whid no sucess???
Thanks for the help
Rui

ruirego said:
I didn´t did that but my SIM is new. Besides that, the problem is that on the splash screen it says NO GSM, with or without the SIM, so I think that it's not related to the SIM. When everything is ok, I had the RADIO version on the splash screen without the SIM.
Thanks
Rui
PS-maybe this is the end of my UNI...I think the next will be the iPhone
Click to expand...
Click to collapse
Dooon´t buy the Iphone! even if you Uni is dead....
I´m sure that the masters here could get you a solution before you consider dead one of the best devices ever!
Good luck,

I have the same problem
Did someone found a solution?

forb1dd3n said:
I have the same problem
Did someone found a solution?
Click to expand...
Click to collapse
Welcome to the forum
I assume that you already read the Wiki right?
Le us know what you already done

Hi.
Yes, I've read all about it, but I sill can't find a solution.
I've done pretty much everything.
I’ve tried to flash it with all kinds of radios. Same thing again – Progress 0%, Error 114. (I can flash it just with OS roms). So I’ve downloaded the service manual and I rip the unit apart, clean it and same thing happens again – No GSM.
MTTY - > D2S command works but shows Operation not allowed.
I’ve downloaded the Uni Sim Unlocker to remove the SuperCID but when I run it on the device nothing happens. And I think that I’ve already done that in the past.
Here is the log from the RUU. (I’m trying to flash just the radio)
12:35:03:739 [msg] : Version : [2.11].
12:35:03:755 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
12:35:03:864 [msg] : MSystemFile Not Exist !
12:35:03:864 [msg] : CEFile Not Exist !
12:35:06:921 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
12:35:10:993 [msg] : Disconnect ActiveSync .... [0]
12:35:10:993 [msg] : Start Get Connect Port.
12:35:11:180 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
12:35:37:107 [msg] : Device BL VER : [1.01 ] [].
12:35:37:107 [err] : Device CID Error.
12:35:37:107 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [1]
12:35:40:555 [msg] : Check Ac in BL mode. AC : [1]
12:35:42:068 [msg] : IsBL. BL : [1]
12:35:42:099 [msg] : =============================================
12:35:42:099 [msg] : START UpdateRadio !
12:35:51:116 [msg] : Check Radio Level 0 [704].
12:35:52:692 [msg] : RUpgrade 0 : 0 Start.
12:40:33:539 [err] : RWipe Data Error.
12:40:34:007 [err] : BL UpdateRadio Error.
12:40:34:007 [msg] : START UnInitialization !
12:40:34:023 [msg] : END UnInitialization !
12:40:34:023 [msg] : IsBL. BL : [1]
P.S.: Sorry for my English.

forb1dd3n said:
12:35:37:107 [err] : Device CID Error.
...
12:40:34:007 [err] : BL UpdateRadio Error.
...
Click to expand...
Click to collapse
It is clear that the device is CID locked.
1. Download SIM unlock tool
2. Flash the SIM unlocked Radio (v.0.00) using MaUpgradeUt_noID.exe
3. Hardreset your device
4. Copy the UNI_Unlock_v1.exe to your SD and run it...
regards

I've already tried that. I can’t flash radios, even RADIO v 0.00.00. The 114 error appears again when I try to flash it, so i can't CID unlock it that way. Any ideas?

I have the same damn problem!
I could use some help please!

In my case (Italy) the solution was to change network selection to manual.

[Q] Legend de-brand Firmware help please :-)

Hi, being an almost total novice i need a little help!
I seem to have hit a brick wall while attemping to de-brand my UK Vodaphone branded HTC Legend!
I just tried with two with different goldcards and three different ROM files (thats six seperate attempts)
each time it failed the same way: ERROR [140]: BOOTLOADER VERSION ERROR
If anyone can offer any advice I would be very gratefull - I really need to get rid of all the Vodaphone bloatware that doesnt even work properly.
BTW - I made a new Goldcard each time but can a goldcard be used more than once?
I created a goldcard using a 2gb MicroSD card made by Kingston and i followed the process at:
How To: Create a Goldcard | TheUnlockr
I downloaded file:
RUU_Legend_HTC_WWE_2.03.405.3_Radio_47.39.35.09_7. 08.35.21_release_130330_signed.exe from Index of /shipped/Legend/
I turned my phone on with the goldcard inserted and connected my phone to my PC with the USB cable and ran the RUU - Result =
ERROR [140]: BOOTLOADER VERSION ERROR
Here are all the numbers from my HTC Legend
Information from: Menu -> Settings -? About Phone -> Software Information
Firmware Version: 2.1 update 1
Baseband Version: 47.39.35.09u_7.08.35.21
Kernel Version: 2.6.29-5f084974 [email protected]#1
Build Number: 2.05.161.1 CL191838 release-keys
Software Number: 2.05.161.1
Browser version: Webkit 3.1
When I start the device by pressing vol down + power button I get the information below:
LEGEND UNKNOWN SHIP S-ON
HBOOT-0.43.0001
MICROP-0816
TOUCH PANEL-SYN07_0105
RADIO-7.08.35.21
Feb 18 2010,16:29:10
Any suggestions would be greatly appreciated.
So far I have tried to load the following RUU files - they all failed with the same error!
RUU_Legend_HTC_WWE_1.23.405.1_Radio_47.26.35.04_7. 05.35.26L_release_120393_signed.exe
RUU_Legend_HTC_WWE_1.31.405.4_R_Radio_47.26.35.04_ 7.05.35.26L_release_123853_signed.exe
RUU_Legend_HTC_WWE_1.31.405.5_R_Radio_47.26.35.04_ 7.05.35.26L_release_126592_signed.exe
RUU_Legend_HTC_WWE_2.03.405.3_Radio_47.39.35.09_7. 08.35.21_release_130330_signed.exe
:-((
I guess I am missing something, can anyone point me in the right direction?