error: Data Crashes. Please contact your service center.
Please help....
Hi,
have you unlocked your phone by imei-check.co.uk ?
Then run the unlocker again, might help.
Newchurch
imei is corrupt show me an imei incorrect
00440000350111200
deleted the area gsmdata and area CID and serial number
cesar said:
deleted the area gsmdata and area CID and serial number
Click to expand...
Click to collapse
How did you do that? With Wizard it's a clear indication of gsmdata corrupted.
Did you make any backup before that happening?
with mtty, i dont know, and no backup
please help
mestrini said:
How did you do that? With Wizard it's a clear indication of gsmdata corrupted.
Did you make any backup before that happening?
Click to expand...
Click to collapse
when i use mtty 1.42 and run the command "DOCTEST" when this finish reboot my cel and automatic run the bootloader and reinstall the rom and say "data crashes" my cid is corrupt and my IMEI, please help
cesar said:
when i use mtty 1.42 and run the command "DOCTEST" when this finish reboot my cel and automatic run the bootloader and reinstall the rom and say "data crashes" my cid is corrupt and my IMEI, please help
Click to expand...
Click to collapse
HOHO
DOCTEST is a NO NO operation on a Wizard/Typhoon/Prophet/etc... it screws the gsm_data area; just as i mentioned above!
If you have a G4 then i guess it's the end of the road for it. If it's a G3 then you can save it (i think)
Related
HI all
i have a qtek_S200(HTC Prophet) which is :
IPL 2.09.0001
SPL 2.15.0001
OS 2.15.13.24
GSM 02.17.21
now,i have experienced a big problem like this:
i wanted to change the ROM of my phone to English..then i download a shiped Rom to flash it...
the shiped Rom i used was RUU_Prophet_1001321_100013102_11320_DopodAsia_shiped.exe....
But everytime i tried to Flash, the program said "ERROR(300):invalid update tool..this update utility cannot be used for your PDA phone.please get newer update utillity" when the phone proceeded to a reseting and turned to three colour mode....
So, that is way? someone plz help me..
ThX
jimmy
2nd problem
the qtek S200 is CHT now, coz it ought to be ENG originallly, so it must be CID unlocked sometime ago...
unfortunlly, when i try to backup its Rom to SD card using MTTY by the code" r2sd all", like backing up a wizard' rom....but it said "you don't get the proper security level to download a specific image"..
Then i use the MachinaGod' lokiwizi and RapiUnlocker trying to unlock the CID, but it displays error and seems fail ..
so, guys plz help me ..
THX
jimmy
UP
Guys please help me
another: HOw to dump a ROM of Qtek s200(prophet)?
Hi,guys..
HOw to dump a ROM of Qtek s200(prophet)?
i tried to dump it's Rom using a MTTY, the code i input was " r2sd all", but it said that
Code:
r2sd all
*****user area size=0x77E0000 Bytes
R2SDBackup0-Download type=5
usTotalBlock=1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
So it is fail......
i want to backup it's Rom, then flash it onto other Prophet ...
Anyone pLz teach me how to do...
THX
jimmy
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
thefamous said:
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
Click to expand...
Click to collapse
i have tried but it is no use..
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Rymez2K said:
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Click to expand...
Click to collapse
hi ..thx for your help.
but..how to downgrade to JAMin_WWE_1000925_10009114_11420_ship.exe ? and what a hacked version of the rom update utility i can use? i mean expect JMFWM(the one need money.i don't like it).
can you please show me the detail steps...thank you very much.!
jimmy
jimmy80,
Have you try as discussed in this thread: http://forum.xda-developers.com/viewtopic.php?t=49298
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
After flashing to a new ROM - WM6 the phone didn't boot the WM6 installation. Instead the old Orange logo appeared and entered in bootloader mode. I tried restoring the ROM from the original WM5 ROM (Orange RO) but it said Not Allowed. Ok... I flashed then a Cingular WM5 ROM and it worked. The initial logo changed and the OS booted. Immidiatly after the Windows Mobile splash I got a message "Data Crashes. Contact service center". If I remove the SIM card the message dissapears. I think something got screwed during the first flash since it didn't go through. I mention that I used the same ROM to flash another C600 phone and it works perfectly.
So... now I can boot up Cingular WM5 and play around with applications, but as soon as I insert my SIM card the Data Crashes message appears. It is my guess that some vital information such as the IMEI got screwed or a checksum somewhere is not checking.
Do you have any ideea how can I fix this?
You didn't superCID did you?
Sounds like you screwed over your GSM section, check with the SPV Services client if it can read your CID/SIM-Lock status
Phil
It was probably that... but to my knowledge I ran lokiwiz.bat.
No, SPV Services can't read the info from my phone - Illegal readZone attempt - RAPI init failed
stargatesg1 said:
It was probably that... but to my knowledge I ran lokiwiz.bat.
No, SPV Services can't read the info from my phone - Illegal readZone attempt - RAPI init failed
Click to expand...
Click to collapse
this means your phone was not application unlocked properly..
Right! Now spv-services works.
When clicking on the SIMLock Tools I get phone unlocked 00000000000000.
When clicking on the CID Tool I get:
Current CID: 0800313131313131313100000000000000000000000000000000000000000000
Technical details:
Now: 160 = 87554b2c510d9ed5da3c2b29dc9068653ce2b67d2065595e3ce2b67d2065595e, 160 = 4d0c1bd5d17f2fc4
Chg: 160 = 87554b2c510d9ed5da3c2b29dc9068653ce2b67d2065595e3ce2b67d2065595e, 160 = 4d0c1bd5d17f2fc4
cool. Enjoy!
Ok, now try flashing WM6GSMUPDATE and then a WM6 ROM and it SHOULD work
Phil
I flashed the WM6GSMUPDATE and then the WM6 ROM and it still doesn't work. After flashing the WM6 ROM I get returned to the old ROM's bitmap with Cingular logo and then the bootloader appears. Any ideeas? Can you give me a direct link to the latest WM6 ROM? Perhaps mine is somehow damaged although I succesfully flashed another C600.
Thanks.
Any ideas? Please?
Is there any way to fix the "Data crashes. Please contact your service center." problem using a HTC Tornado?
Htc Sda T-mobile Is Dead
MY PHONE IS DEAD WHEN POWER UP ONLY SEE T-MOBILE AND DEAD, THE PROBLEN I HAVE WHEN I try flash a WM6 ROM AND MY COMPUTER SHUT DOWN, NOW IS IMPOSIBILE TO ME TO MAKE A RESET OF THE PHONE YOU KNOW WHAT I NEED TO DO, THANK YOU AND I WAIT YOUR ANSWER
Can you get to the bootloader? If yes, then try flashing again.
Hello to all:
Only after try searching in forum and google i decided to wirte in this fantastic forum. Sorry for my poor english....
I have a ebay-purchased Artemis (P3300) and, using Opera mobile it freeze and I swithched off. It never change Windows Mobile more....
It only reachs the bootloader mode and if I try to charge another ROM but I can't because it give an ID error. The device is not CID unlocked....
I try to unlock it:
- Kaiser unlocker: not posible, requires ActiveSync
- SuperCID: the same above
- Blackstone Cid unlocker: Is my solution....but doesn't work!!
Changing the Vista-driver and in Xp I get the same promp:
Device no response (or similar)
I can use RUU with mtty without problem.
The posibles solutions the I can understand throught this forum are:
- Technical Service: No posible, the ebay-vendor removed the IMEI - without IMEI they don't repare without a legal IMEI (and in garantee...)
- Hard Reset: doesn't work, the device format his internal device, start windows installation and it freeze completely.
- CID unlock: Only posible in bootloader mode and in doesn't work with blackStone
- Original ROM: If i could find the original ROM, the device will complete the actualization and (with lots of luck...) restart the device OK
There is another solution?? a tecnical service without IMEI requirement??
Thank you very much, I'm waiting hopefully answer....
thanks!!
hewelpakar said:
Hello to all:
Only after try searching in forum and google i decided to wirte in this fantastic forum. Sorry for my poor english....
I have a ebay-purchased Artemis (P3300) and, using Opera mobile it freeze and I swithched off. It never change Windows Mobile more....
It only reachs the bootloader mode and if I try to charge another ROM but I can't because it give an ID error. The device is not CID unlocked....
I try to unlock it:
- Kaiser unlocker: not posible, requires ActiveSync
- SuperCID: the same above
- Blackstone Cid unlocker: Is my solution....but doesn't work!!
Changing the Vista-driver and in Xp I get the same promp:
Device no response (or similar)
I can use RUU with mtty without problem.
The posibles solutions the I can understand throught this forum are:
- Technical Service: No posible, the ebay-vendor removed the IMEI - without IMEI they don't repare without a legal IMEI (and in garantee...)
- Hard Reset: doesn't work, the device format his internal device, start windows installation and it freeze completely.
- CID unlock: Only posible in bootloader mode and in doesn't work with blackStone
- Original ROM: If i could find the original ROM, the device will complete the actualization and (with lots of luck...) restart the device OK
There is another solution?? a tecnical service without IMEI requirement??
Thank you very much, I'm waiting hopefully answer....
thanks!!
Click to expand...
Click to collapse
Hi,
Without IMEI your device is useless. Send it back to the vendor.
Dirk
I know....
I know but without IMEI is not useful, but I purchased it three months ago and now i can't ask anything to the vendor....
Then, do you think that it is a hardware problem or a software prolem??
Thank a lot!
hewelpakar said:
I know but without IMEI is not useful, but I purchased it three months ago and now i can't ask anything to the vendor....
Then, do you think that it is a hardware problem or a software prolem??
Thank a lot!
Click to expand...
Click to collapse
It's both... the SW needs the IMEI (hardcoded in the HW) to check if the device is accessible. IMEI is like an ID-card for humans... without ID you don't exist, just like a phone without IMEI doesn't exist.
Will look nice as paperweight though
Dirk
No IMEI stick
The device has an IMEI and was functionally for two months without any problems... but the IMEI stick is not attached into the battery hole.
Then, in real the device has an IMEI and can work as a telephone, but I have no way to know it....
His use as paperweight is the last choice...i hope!!, In this case....it will be an very beautiful one....
Then, If i could restore the ROM on the device, maybe it would work properly...
Any idea to restore it??
thank a lot!!
hewelpakar said:
The device has an IMEI and was functionally for two months without any problems... but the IMEI stick is not attached into the battery hole.
Then, in real the device has an IMEI and can work as a telephone, but I have no way to know it....
His use as paperweight is the last choice...i hope!!, In this case....it will be an very beautiful one....
Then, If i could restore the ROM on the device, maybe it would work properly...
Any idea to restore it??
thank a lot!!
Click to expand...
Click to collapse
Did you look around in the Artemis fora ?
Dirk
some body help me, my AT&T 8925 stuck at bootloader
here is the information
KAIS***
SPL-3.56.0000
CPLD-8
Have a look at this thread : http://forum.xda-developers.com/showthread.php?t=423486
Ta,
Dave
i've tried but it isn't work. when type the command 'boot' it said command error!!! why's that?
datduong_1995 said:
i've tried but it isn't work. when type the command 'boot' it said command error!!! why's that?
Click to expand...
Click to collapse
boot rarely works.
If you don't have RUUNBH, your best bet is finding the Official ROM for your device and re-flashing it.
Dave
but i don't remember it. My AT&T 8925 use window mobile 6.1 professional, can u find the ship for me, please. I'm a vietnamese so my english is bad
datduong_1995 said:
but i don't remember it. My AT&T 8925 use window mobile 6.1 professional, can u find the ship for me, please. I'm a vietnamese so my english is bad
Click to expand...
Click to collapse
All the known ROMs for the Kaiser are here : http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Try figuring out from the Make of the Handset, or by following the instructions in the guide for performing an "info 2" command using MTTY.
This gives you the CID, that you can use to help find the correct ROM.
Dave
thanks bro
dude, i type command info 2 but it's not work
try again.
It will not fix the problem, it will print out the CID of the device.
Dave
the result is same
What's the result?