Model Id problem qtek s200 - JAMin, XDA Neo, S200 Software Upgrading

hello...i'm having problem entering in windows live messenger...cannot enter without model id in device information...I reeinstall fantastic mobiz 1.1 and dissapear model id.
Can anyone help? tanks!!

Related

Rom upgrade problems, HELP Please.

I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.

GetDeviceData output from a S100 wanted

Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.
...at least the Operator for QTEK...
C'mon guys... help me.
Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.
Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...
Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...
The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.

Not allow update! MDAc damaged :-(

Hi.
I damage MDAc with testing of flashing Now only what I can is start MDAc to BootLoader (version 0.2), nothing else. All updates, what I testing are "Country ID error" and dont help me changing operator too. I have other device, but it is I-Mate JAM. From JAM (BootLoader version 1.0) I download ROM to SD card (via USB terminal), but when I insert card in MDAc, only, what I seee is "Not allow update!". When insetr SD to JAM, all is OK and flashing is allowed. I dont have SD card reader. What can I do?
Thank!
V okamžiku kdy spustíš nový upgrade, a napíše ti to "country ID error", hned zmen operatora u toho updatu na jiny, cihlu ponechej připojenou, a upgrade spusť znovu. Opakuj dokud nevystřídáš všechny čtyři operátory. Vůbec mezitím neodpojuj cihlu od PC. Pokud se to nerozjede ani s jednim operátorem, zkus hned jiný upgrade, a postupuj stejně.. Takhle jsem kdysi probudil jednu totálně mrtvou MDA II.. I´m busy, so I don´t have a time write it in english.. SORRY
And which four Country ID codes you mean? :wink:
T-mobile, CDL, Qtek, O2. Test upgrade with this all operator, and let the Compact connected to PC during this testing..
And ID's ?
I don´t know it.. But I think, every operator has his own upgrade, so find them and test them.. Someone must work!!!
"Country ID error" is diferent between this upgrade..
I dont know why, but now my MDAc can boot to system (but without GSM). I run GetDeviceData.exe and this is DeviceData.txt. As you can see, some informations are missing. I test start upgrading on JAM and after verify I connect MDAc, but this dont work too.
Give me your phone number. I want to speak with you.. It will be quicker.
I'am not on phone now, go to ICQ :lol:
Where can I find Divice ID in update files? Now I have Error 100 message
Where are you come from?
Czech Republic. Why?
I still need help
Try this:
http://forum.xda-developers.com/viewtopic.php?t=14553
It allowed me to flash an english Rom (and later an Italian one) over a German device. I suppose that if you find right international codes of your rom you can flash the new one.
Good luck! :wink:
thanks, but this dont work too, still wrong country ID

2125 -> QTek ROM -> ERROR [296]: UPGRADE ONLY

I own a SPV C600 (Dutch). Because of the tight security of the latest Dutch ROM for the C600 I flashed it with the latest QTek 8310.
Now I've tried the latest Cingular ROM for the 2125.
Because the Cingular ROM only supports the English language I want to change it back to the QTek ROM again.
But no matter what I do it keeps saying :
---
ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your Smartphone. Please get newer NBF file.
---
I did raise the number on the image version, removed the Operator field. Also tried to make al the fields exactly like it shows on the "update screen" before flashing.
Anybody able to help me out here?
Common, where are al those smart people
Posted this als on SPV-Developers, seems like I'm the only one with this problem Now I'm stuck with an English C600
i had a similar problem with an englsh c600 spent ages sorting it, what i did is sent the header with a matching operator id. then i changed every number up by one in both version numbers. this didnt work but then when i only changed the second digit in the first version number by one again the rom loaded.
ie
11.1.1.5 > 12.2.2.6 > 12.3.2.6
i suggest just persist with it. otherwise use spv services to unlock your cid then you can load what you want on your phone.
Thanks for your reply!
I'm using the latest Qtek 8300 ROM now. I don't know if it's the best. But at least it's unlocked

Qtek s100 upgrade fails

Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx
No one for help ?
Okey...thankx any way.
Darkmdex said:
Hello,
I was in WM 2003 in my Qtek s100 (radio 1.11.0) then i changed rom to cotulla 3.06 WWE (last version), it's works but now i want to have original rom, the english or the french one, i downloaded from trusted site, like Shipped-rom, etc...but everytime i flash it tells me that there is a problem.
The english one tells me "Country ID ERROR" the french one tells me the same, and the other french one tells me General Error, and it does not work when i use MaUpgradeUt_noID.exe, i really need to flash to the last original version of my Qtek s100 !!
Please help me !
Windows xp SP3 (32 bits) with ActiveSync installed, tried with disabled too.
Thankx
Click to expand...
Click to collapse
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?
d-two said:
have you put the device into bootloader mode and use the MaUpgradeUt_noID.exe?
Click to expand...
Click to collapse
Yes i did ! it says upgrade from (nothing, it's blank) to (nothing, it's blank) then it says succesfull but when i boot the phone it's the same !
Do you have a solution please ?
Thankx

Categories

Resources