Database Info

GetDeviceData output from a S100 wanted

Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.

...at least the Operator for QTEK...
C'mon guys... help me.

Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.

Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...

Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...

The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.

GENERAL COUNTRY ID ERROR WORKAROUND: IT WORKS ALL DEVICES!!!

Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye

Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.

xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?

ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck

where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help

this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.

crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11

guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....

not working in Qtek S100 any idea????

it works on S100 / jam / mda c
i tried several images with several devices!
good job!

crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel

Some Please Help!

I tried to update my rom with a jester rom RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe i wasn't sure if i had g4 or g3 but its a newer qtek. The install finished 100 percent but my phone is stuck on 3 colour bars red green and blue, it says IPL 2.09 and SPL 2.20.001 when i plug the USB it detects it and displays USB at the bottom
CAN SOMEONE HELP!

jester rom
just reflash using an old shipped qtek rom from the ftp watch out for a 2.20 rom

Still No Luck
I just tried to flash with this rom ROM_QTEK_S200_2.20.7.34_2.47.21_2.20.7.114_WWE.zip
using this thread as a guide to repair my phone
http://forum.xda-developers.com/showthread.php?t=283245
and during the update i get a red bar at 80% and it tells me that i have the wrong nk.nbf
What else can i do?! can someone suggest another rom or something else

try this
ftp://xda:[email protected]_220734_2207114_024721_QtekWWE_Ship.exe
please tr this rom and report

Thanks for the help man! okay heres the scoop, i just tried a really old rom that used to work on my qtek s200 if you guys remember its this one: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip
The result of that was it got to 80% the bar turned red and then on the computer it told me that i had the wrong NBF file
What scares me is that this one actually used to work!
I just left the house for a while and i will try the above rom and then report back...
Does anyone have an idea why it keeps giving a red bar then saying i have the wrong NBF?...

I just tried the rom you suggested....i get a vendor id error. My qtek doesn't even know its a qtek anymore whats going on here, when i tried the above jester rom the installation completed is it possible it thinks its something else still?! please help
Also is there away to charge the phone while in the bootloader...it doesn't charge anymore and once my battery is done im stuck!

vendor is the person who sold it to you...
just get a no vendor id update tool on the ftp site under tool and replace the update tool from any rom you wanna try

turkishhusla said:
I tried to update my rom with a jester rom RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe i wasn't sure if i had g4 or g3 but its a newer qtek. The install finished 100 percent but my phone is stuck on 3 colour bars red green and blue, it says IPL 2.09 and SPL 2.20.001 when i plug the USB it detects it and displays USB at the bottom
CAN SOMEONE HELP!
Click to expand...
Click to collapse
Hi,
however im also new to upgrading etc but heve got some exprnc from forum, so what im going to suggest u may help.
Whatever u mentioned in ur first post, conclude that u had G3 prophet before flashing to Jester's -r1 for G4( it was ur unlucky mistake). Because Jesterz-r1 for G4 do not include ipl,( if u extract it using typho5.exe u find spl file with other OS,GSM,Splash etc but not ipl) thats y ur ipl remains unchanged after flashing, and ur spl changed. so for recovery first u get Jesterz -r1 for G3 from ftp and then try 2 alternative.
1)Extract Jesterz-r1-G3 using typho5 and get only OS, GSM, ExtRom portions
and dont select it ipl or spl files. After that make a fresh nk.nbf file using
nb2nbf_tornado.exe with OS,GSM and ExtRom files.(be cautious to use
nb2nbf_tornado.exe, if ur not aware of its correct use for prophet).
then flash ur device with newly created nk.nbf and Prophets RUU.
2)Just flash ur devce with Jesterz-r1-G3.
Im sure with first alternative, u wont damage ur device further, but i cant say about outcome of second alternative.
thanx
nandlal

Can someone confirm if my prophet was a g3 or g4 prior to flash? and if flashing with a g3 rom will damage my prophet further.

Your IPL/SPL ends in .001 so that means you have a G4 prophet. I have no clue if flashing with a G3 ROM will be bad.. I'm assuming it will. But I'm just a fellow newb...

turkishhusla said:
Can someone confirm if my prophet was a g3 or g4 prior to flash? and if flashing with a g3 rom will damage my prophet further.
Click to expand...
Click to collapse
Dont confuse, U had G3 Prophet before upgrade and it will remain so. For ur other question, i'v PMed u answer.
Reply as u proceed.
thanx
nandlal

problem with with 5._Underground_edition_Crossbow_ROM.exe

hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.

u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition

but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.

You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).

thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.

Attention Masters : problem when upgrading WM5 to WM6 with O2 XDA Neo [G4]

when i upgrade [loading rom] WM6 version "FantasticMobiz_v1.1i" my battery crash down.....
then i charge battery .... and start o2
i got to bootloader with screening ....
RUU
IPL 2.15.001
SPL 2.20.001
USB
... then i decided to load original ROM "RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship"
at 80% of loading it will stop at 1 minute with red strip then continue to 95% and then again stopped with error : Invalid Command : this rom is not for this pda
this type of error usually not occurs.......
this error code have solution....
go to customer service center and get new flash rom code....
but i don't know that what is new code rom.....
Can anyone help me.....
email : [email protected]

test with a nvid rom

checked..,.
i checked with NVID ROM
still have same problem....

you gotta remove the IPL/SPL for NVID,as the rom has the IPL/SPL installer itself..
the solution is:
recook the NVID ROM.
how? :
visit www.molski.biz
then look for "cook your own ROM".
the instructions are out there.

there is nothing but Radio Rom Problem.... solved
hi guy,
i solved this problem....
so thread is close...d.
thanks for suggestion.

Hi snggwt
How did you solved, could you explain us, I am having the same problem.
thnx