I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.
Hi,
I had the same problem some time ago.
In ActiveSync\File\Connections I had to tick "This computer is connected to: The internet". Now it works.
xunkn0vvnx said:
I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.
Click to expand...
Click to collapse
Change "cellular line" to "cellular line GPRS" from the scroll down box.
The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.
xunkn0vvnx said:
The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.
Click to expand...
Click to collapse
Follow the screen shots in order 1-4. access point: wap.cingular(lower case) User: [email protected](all caps) Password: CINGULAR1 (all caps)
8125
2.25.11.1
Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."
xunkn0vvnx said:
Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."
Click to expand...
Click to collapse
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.
hotdog53 said:
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.
Click to expand...
Click to collapse
One more thing to try: go to your connections settings, tap on advanced (at bottom) select MediaNet from scroll box, tap "proxy" the box that says it uses a proxy to connect should be unchecked (empty) The top box should be checked. You haven't done any internet connection tweaks in the registry have you?
0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.
xunkn0vvnx said:
0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.
Click to expand...
Click to collapse
Sorry man, I don't have the cabs for this fix. I remember reading about someone having the same problems and a cab fix was requested. Can't remember where I read about it. I recommend a forum or google search for the cab fix...I'm pretty sure you'll find what you need.
Ok here is the weird thing... I am running SPB mobile, and when I sync my weather is able to update for New York, NY. Doesn't that mean it must be getting an internet connection through PIE? DOes SPB mobile mess with the registry?
Anybody? Lately I've been using WiFi to update my phone but Id rather have it work when it is cradled.
Is it possible to permanently affect my Wizard's internet connection by over flashing??
I'm having a problem connecting to the internet. It doesn't connect via WiFi whether on an open or WEP network (I'm testing it with 2 routers -- mine and my neighbors). It connects to GPRS just fine as long as I put the right ISP info. But when I try to load a page in IE it comes back with 1 of 2 error messages:
1)
Error 502 - Bad Request
The server could not resolve your request for uri:
2)
Cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.
I was running a custom made vanilla 1413 for the longest time. Then yesterday tried MFrazzz's 1913 and now ANTC's. Between one of those two I am not unable to connect to the internet. I even flashed back to the 2.24 official T-Mo ROM and even with the factory settings it still not working for either GPRS or WiFi. In the past hour I've tried T-Mob official, ANTC 2.0 and XM6R4...all the same problem.
So that virtually eliminates the possibility that it was either a bad radio, corrupted Ext ROM or a bad flash. It definately seems like my Wizard isn't being given an IP address. So that would be a software/ROM/registry problem, right? Well then why is it not working with 3 fresh ROM flashes??
Any suggestions??
If I connect it to my PC via usb/activesync and use the PC's internet connection then it will go ahead and load webpages.
As soon as I disconnect the USB cable then it'll load up the GPRS connection and try to load a webpage and timeout with one of the errors above.
One strange thing I noticed is that when it gives the 502 error it removes the domain from the uri. Example:
Target URI:
http://mobreader.com/proxy.aspx?s=http://test.com...
Response:
Error 502 - Bad Request
The server could not resolve your request for uri: /proxy.aspx?s=http%3A%2F%2Ftest%2Ecom...
seems your proxy is not functioning correctly
reflash with original rom and then this rom you would like
you can also try and delete all connections but i doubt it helps..
I'm on T-Mobile full internet plan, not T-Zones or anything, so no need to set a proxy. Just put in the access point as wap.voicestream.com and it should work.
I've input the data manually as well as tried with the t-mobile wap setting cabs. Doesn't make a difference. Also since these are freshly installed ROMs (including an official T-mobile ROM) there shouldn't be any proxy settings pre-set, right?
yes i am aware of that..
i need to explain myself more , sorry for that..
what i mean is the proxy inside the phone , not the one u setup with t-zones
or any related..
Ok a little update...
I was able to connect via Wifi this morning, it was either
A) Registry changes to HKLM>Comm>TNETWLN1>Params>HTCPreloadStatus to value of "1"
B) Registry change to HKLM>Comm>TNETWLN1>Params>HTCPreloadWifi to value of "1"
The router assigned me an IP address now and fully connected. I'm able to pull up websites now. Sometimes the above registry settings mysteriously change back to "0" value and if that happens then I won't be able to pull up a website. So I know what was causing the WiFi issues.
But still don't know what's the problem with GPRS. Still can't load a website via URL or even IP address. Is there a similiar registry edit that I can make that will restore GPRS connection ability?
Thanks in advance guys.
Hi all,
I was setting up voip to access our Asterisk voip server. Asterisk box is on a dynamic IP so we have setup a DNS redirection thing. The Asterisk box has therefore a 'username.dyndns.org' web address as its IP.
Hope you are all still with me!
Anyway, stuck in the address in the setup program and now get an error everytime I try to start it....so cannot even get to the stage where I can change it....
I've tried deleting and reinstalling but that does not help.
So, long winded question, where is the file that holds the voipsetup configuration data??
And if you can help, what would I type in as the service IP. normally you would simply stick in an IP number but in my case do I stick in http://username.dyndns.org or username.dyndns.org...?
Thanks
Anyone got any ideas...before I get lost in the soap of forum messages...
I have my brand spankin' new TC on Rogers here in canada. Ran the auto connection wizard, great! I have Internet! But I get the cannot connect error every time i send or receive email using outlook. I have tried everything I know, is there something you can suggest? It works fine over WIFI, and ActiveSync via USB. But over the 3G there is nothing!
OK, I figured it out.
For future reference.
When your setting up the email account, do it manually as opposed to allowing the auto set up to happen. And at the outgoing mail server screen select advanced options and make sure it connects to your carrier (In my case "Rogers Internet") internet connection.
Hi Guys,
I have a fair number of Orange E650's which connect to my Exchange server via GPRS/3G (Orange Internet).
Theyve been working fine for months until this week we moved our mail server to another site. Nothing at all has changed on the server, only its address.
Outlook Web Access works fine, which is what ActiveSync uses to sync with the server, but for some reason I now get this error.
I can use IE on the phones to access OWA with no problems, but when ActiveSync tries to connect it just gives me this error.
If I use the wrong username and password it comes back to me to verify them so it must be contacting the server to verify the credentials, therfore it can be a DNS or Cache problem.
I've just done a hard reset on one of the phones and get the same issue when I setup the email account.
Does anyone have any ideas?