some days back i made a hard reset on my 02 xda mini. After that i am not able to allign its secreen.I tap the secreen on its + sign,it moves to all corners and finally stops in the centre of secreen.It doesnt move at all from centre.So i am held up there.Any solutions please? thanks
Related
My XDA ran out of battery and so I lost everything on it so I have to re-synchronise with my PC.
However, I cannot get past the "Align Screen". I an constantly tapping the four corners but once this is done and the cursor goes back to the centre of the screen, the screen doesn't change and I am unable to get to my XDA.
Urgent help please!
make sure you tap the cross in the middle of the crosshares
Yes, so I have found out after a lot of hard work!
Thanks!
I some how convinced my cousin for a Windows based devices and from somewhere he has got XDA IIs..
But...the screen alignment has to be done 3-4 times till the "Next" option is displayed..then it works fine till the whole ext ROM is installed...But agsain the problem starts....I mean If I tap on "Start" the VOlume Indicator Pops up...like this...
So I align the screen once again...and after say 1/2 hr or so.... same problem... I know there is something wrong either the Touch Panel or the Display or the mother board...
I request if some xpert can inform which one is to be attacked so that I can visit O2 service center...as I trust this more than any one...
Pls help me out
I have just done a hard reset on my XDA. However, I am unable to get past the Align Screen mode as I align the screen but it won't go any further.
How can I get past this so that I can get into my XDA and synchronise it?
Thank you
Why isn't it getting past screen alignment? Is it not responding to taps?
V
My XDA responded to virtually nothing - I tapped the screen and it took 5 minutes to respond to every tap instead of instantly. I was advised to do a hard reset, but when I do the screen taps to align the screen, the cursor goes to the middle of the screen and nothing else happens so I am unable to progress.
Any help would be appreciated.
Ive this problem as you do,
Anyone can help?
please
Gill said:
My XDA responded to virtually nothing - I tapped the screen and it took 5 minutes to respond to every tap instead of instantly. I was advised to do a hard reset, but when I do the screen taps to align the screen, the cursor goes to the middle of the screen and nothing else happens so I am unable to progress.
Any help would be appreciated.
Click to expand...
Click to collapse
Weird...
Are you using a screen protector? If so, take it off before alignment; it's possible that there's some crud stuck underneath it that's registering a tap, or something.
I can't think of anything else, besides a faulty touchscreen, or some dirt in one of the edges of the screen. Sorry.
Try reflashing the rom. If that doen't work then looks like you've got hardware failure.
kindly redirect me on how to flash the rom?
im very new
Thank you
Use the search please...
http://forum.xda-developers.com/search.php
and type what you want on the form...
Does anyone know how to reset a Samsung Omnia?
Mine's stuck at bootup and i cun press anything.
I need to know if there's a series of button presses b4 poking
with the stylus to hard reset the phone to factory settings.
Thx in advance.
Did you do anything to the phone, in terms of modification? I was really interested in that thing, but having to do a hard reset on a brand new phone is a little disconcerting...
I tried installed everything that i had on my touch cruise
and everything was working superb.
Then this morning i installed HTC Home Plugin v2.1
and that hung my phone after i restart.
Now i've got no way on getting pass bootup screen.
A google search of "hard reset omnia" yielded this.
http://asia.cnet.com/reviews/handhelds/0,3800005395,39470096-43574745p,00.htm
26th June 2008: Was advised by the customer service rep (CSR) on the phone that the only way to solve my hanging issue is to bring to your Customer Service Center for a firmware software reinstallation.
Click to expand...
Click to collapse
Sorry to be the bearer of bad news
edit: http://forums.hardwarezone.com.sg/showpost.php?p=31024391&postcount=59 Try the method here.
when was onmia out ???? can you post some pics of the device ??? thanks i needreal shots not the ones that are online!
outphase said:
A google search of "hard reset omnia" yielded this.
http://asia.cnet.com/reviews/handhelds/0,3800005395,39470096-43574745p,00.htm
Sorry to be the bearer of bad news
edit: http://forums.hardwarezone.com.sg/showpost.php?p=31024391&postcount=59 Try the method here.
Click to expand...
Click to collapse
How awfully true..
Just got back from the service centre at Plaza Singapura.
Yup. Upgrade of software was the way to go.
The lady did say that the hard reset was the same as HTC,
pressing of the call and end button thingy but mine couldn't work.
Anyway, it was silly of me to go install the HTC Home Plugin.
Thx anyway bros for all replies..
Omnia Rocks!!
C J said:
Does anyone know how to reset a Samsung Omnia?
Mine's stuck at bootup and i cun press anything.
I need to know if there's a series of button presses b4 poking
with the stylus to hard reset the phone to factory settings.
Thx in advance.
Click to expand...
Click to collapse
tap the soft reset button on top of the device using a thick stylus, you will get back the boot screen.
follow this
do the soft reset and immediately press the two green and red buttons(send and end keys)
you will get a hard reset menu on scree
Hello
Isn't posible reset the Omnia?
My wifi don't work
C J said:
Does anyone know how to reset a Samsung Omnia?
Mine's stuck at bootup and i cun press anything.
I need to know if there's a series of button presses b4 poking
with the stylus to hard reset the phone to factory settings.
Thx in advance.
Click to expand...
Click to collapse
turn your phone off, than press red and green buttons and after press phone on, you will get 2 options, 1 format: press phone on, 2 cancel: press phone off, in italy omnia this procedure is working.
It works man!!
Eureka!
Yes it does 2 x's now and one after a firmware update to version i900DXHK3/DXHK3 (Singapore). Which I did earlier today.
I had some how managed to put a pass I could not get right (how who knows).
After several attempts and finally an 8 min. mandatory wait. I did it. My final solution was that I had to wait and keep device awake for time to pass. 8 long agonizing minutes~!
1. Wait till reset timer is elapsed and devices is awake.
2. press both call and end button (ie green and red) I didn't press too light or hard just normal.
3. Push stylus on soft reset and within 5-8 secs eureka format screen.
4. hit call button.
This may not help every one but those with pass problems mab.
Hi, guys!
I 've just got a HTC Touch pro (O2 Xda diamond pro) from O2. I was not really satisfied with the branded Touch Flo 3d interface wherefore I tried to use the Diamond 3d Config Tool touchflo to put my device back to original HTC settings. But since these original UI was much slower than the O2 one(personal impression) I decided again to reset my device to use the stabdard O" branded Touch Flo 3d interface. Unfortunatelly when I change to keyboard mode I still see a HTC screen instead of the O2 screen.
Can you please help me on this?
I have also tried to hard reset my device, but foudn out that when I restart the device and press the VOLUME DONW and the ENTER key (on teh keyboard) the only thing that happens is that I see four color bars on the screen with some yellow numbers and text. THats all.
Please can you help me at least by telling me (maybe with photos) which buttons to use to hard reset and how the screen should look like? I have ofcourse checked the user guide, but I do not see the screen asking me whether I really want to do a hard reset (as described in the user guide).
Please help me on this!!!
Many thanks in advance!
Regards,
BBMG
Some would say RTFM or the Wiki before you post but I've been helped so many times here when I didn't deserve it I'll say volume down + enter + reset
Hi!
Yes, thanks for the tip, but I have ofcourse tried that and as I said there are just some color bars appear on the screen. BUt before they appear I see a message "No Image File!". SHould that mean, I cannot hard reset my devicè anyway?
Regards,
BBMG
Had same problem
Hi,
I had the same the same problem with my O2 xda diamond pro.
But I've solved it.
- turn on xda and wait ~ 2 min until all services run.
- press volume down
- press with a pencil with a soft tip on enter (round Button in center)
- hold everthing pressed (tricky)
- press reset button and wait until konfig screen aproache
- Follow messages
- Done
hold pencil with my mouth. Looks like circus act...
BBMG said:
I have also tried to hard reset my device, but foudn out that when I restart the device and press the VOLUME DONW and the ENTER key (on teh keyboard) the only thing that happens is that I see four color bars on the screen with some yellow numbers and text. THats all.
Click to expand...
Click to collapse
The enter key is the circular button under the screen, not the one on the keyboard
Still does not work
Many thanks for the tip. Yeah, it really looks like a circus act, but still does not work at all. First fo all I see a white screen (I assume that is the boot loader) saying "Loading ..." and short time after that I see a message "No Image File!". After that, I only see the following screen. Sorry for bad image quality. Took it with my old Nokia 6230i device.
Any tips?
Maybe there is someone who knows either from where to get an original O2 xda Diamond Pro image or how to setup the vertical screen that appears when the keyboard is open?
Text on the screen:
RAPH120
SPL-1.90.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
Serial
Many thanks in advance!
Regards
BBMG
Is there really noone who can help me out?
Hi,again!
Does anybody noticed the same problem as I have described above?
Please help me out guys!
Thanks in advance!
Regards
BBMG
You did read that the "enter" button is the round button on the front and not the "enter" button on the keyboard?
you entered bootloader, that mean you didnt hold the "enter" button (circular looking, when plugged in you see lights around it) at front of the phone, while holding vol down and press the reset button
BIG BIG Thanks
Hi, again!
You, were totally right. I was too stupid to recognize the round button as the enter button, although it was mentioned already before.
Now, my device is restored correctly.
Thank You!
hmmm
i kinda got the same problem but i pressed the Circle Button + Volume Down + Soft Reset
.. always if i do so it hangs at the T-Mobile screen
the bootloader with Volume Down + Soft Reset works fine
... any tips what i do wrong or what i could do now ?
and btw dont install Nydiot Virtual Desktop on your raph