Related
i have XDA trion and apart of the problem i have with teh alignment of the screen which i find out that is practically unsolvable, i have another problem which is as much annoying as the alignment one:
when i tap on an area somewhere in the center of the screen it closes my window in portrait mode and opens start menu in landscape mode (obviously when i tap there it actually taps on the upper right corner where the X button is when in portrait and the start menu when in landscape )
that does happen only when i tap in a little area right at the center of the screen and seems to be different from the usual misallignment that i have (and many others )
can anyone help me please
thanks
welcome to the forum,
I recommend using the hardware buttons to go to start/settings/system/screen/align
and if that doesn't help, hard reset
bbobeckyj said:
welcome to the forum,
I recommend using the hardware buttons to go to start/settings/system/screen/align
and if that doesn't help, hard reset
Click to expand...
Click to collapse
thanks...
i already installed a new ROM but still doesnt fix it ...
mabe i will have to end up spending 100 EU for new screen
any otehr suggestions?
sorry, I assumed you were new due to join date and first post, hence my first reply.
give us a couple more details when you post please, such as did you buy it brand new/second hand? if it's not new how long have you had it? has it just started doing this recently after behaving like a good pda for ages? or has it always done this? which rom are you running? and is it the official one?
anyway, you could try removing the casing and clean around the edges of the screen, I've read of dirt/grime getting built up and stuck, which can cause this problem. if you don't know how to remove the case (I don't either)-Google
good luck
Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!
guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.
Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??
go search for remotecalibration.exe
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
Hello,
I have a very strange problem with my HTC Touch Pro phone.
I'll explain my problem:
When you turn on your phone and you are on the "Home page" (the page where the time is displayed) there is a bar at the bottom of the display.
This bar says Phone and Programs.
When i access my volume control by using the 2 buttons on the left side of the phone a black screen appears with some bars on it to indicate the volume. Note that the black bar with the Phone and Programs buttons is gone!
But the problem is that i can slightly see the Phone and Programs text trough the black screen of the volume control...
The first time i turned on my phone it was clearly visible, but after hard-resetting my phone 3 times it seems to be all gone now.
What could have caused this problem? Are these texts burned into my screen or is my screen sensetive to white letters?
I really dont know what to think about it because it seems very strange to me that it is now gone after 3 hard-resets...
Does anyone know what may have caused this problem?
edit
When i still had the problem i checked out if the text that was visible on the volume screen was the actual text that should stand in the black bar on the bottom, but when i accessed the volume control from the Programs tab (notice that the menu bar then displays "All programs" and "Remove"), but the volume controll still displayed Phone and Programs, so it isn't the actual text that is visible, so it cant be something like a shine-trough or something like that.
Really dont know what to think, at this time 3x hard-resetting the phone helped and the texts aren't visible anymore, but i'm still worried that my screen is over-sensitive or maybe broken or something =\
edit
The text is getting visible again after having my phone on "stand by" for 10 minutes.
Does anyone has a solution or does anyone knows what the problem can be? i would like a awnser today because i could go the the store tomorrow, i may be able to switch it for a new one if the screen is really broken.
Hope someone knows more!
edit
Maybe some of you dont see it on your one Touch pro, but you will if you REALLY look close at the bottom left and right corner in your volume control screen.
Could it have something to do with lazy pixels or something?
edit
It seems to get worse when i have the phone and programs texts on my screen for 10 minutes, and then switch to volume management. Are my pixels lazy or something?
The longer the screen stays on with the Phone and Programs texts on and the icons of the menu etc, the more you see when you turn on volume control.
it just looks like it burns into my screen.
Take care! Maybe it burned into your eyes!
No, serious it cannot burn into your screen.
Only CRT screens can burn it, not TFT.
Hmm ok thats true haha,
But what else can cause such a problem... it is only visible if the phone is off stand by for a few minutes.
I had my phone on stand by the rest of this evening and just turned it on and now it is all gone again. But if i put my phone on the home screen for a few minutes, so with the texts, then its visible again on the volume controll screen
Had the phone on standby the whole night and now the texts are gone again.
They seem to get "burned" in somehow if the phone is off standby for a few minutes, but then when its on standby for a while they are gone again.
Just wanna know if more people have the same problem, or else i could send back my phone to HTC for a repair
johanromijn said:
Take care! Maybe it burned into your eyes!
No, serious it cannot burn into your screen.
Only CRT screens can burn it, not TFT.
Click to expand...
Click to collapse
http://compreviews.about.com/od/monitors/a/LCDBurnIn.htm
Well that seems to be the problem over here...
But when i turned on the phone for the first time there was much more "image burning" on the screen, and at this moment it is all gone ...
Could it be that the screen had to "warm up" or something because the phone is just 2 days old. The longer i used the phone the less the image burning is now.
Do these screens have to warm up or something when you turn on the phone the first time?
They shouldn't... Especially if you bought it locally, I'd take the safe road and return it. I'm not sure if it's exactly what that source describes, but I don't like taking chances with phones as expensive as this.
Hmm ok, thats wierd because the more i used it the less burned in texts are visible.
at this point there is nothing visible on my screen anymore ..
isnt there ANYONE else here that has the same problem or that wants to try it out and leave the phone off standby for some time ?
Someone that has the same problem, or someone who wants to check their phone for the same problem?
I dont know if i should return my phone for a repair..
Problem is getting visibl again,
Have used my phone some time today, but i didnt have it off standby for longer than 1 minute, and still there is a white bar slightly visible on the volume controll screen.
This is definately a problem with the screen right? something like Lazy pixels or something..
Anyone that can help?
btw, its seems that only the white colors get burned in
edit
It only seems to get "Burned" in when i'm in a window with white bars or spaces, and it fades when i have the phone on a black screen for a while..
And it only happens with the HTC Volume app?
no, but its good visible on that screen, its also slightly visible on the home screen etc..
It doesn't only burn in when the phone is off standby, but it also seems to get worse when the phone is ON standby... what i mean is that it doesn't fade away right away when the phone is on standby...
Just went back to the store to get a new phone.
I checked right away if the new phone also has the same problem, and it does...
texts also seem to get burned in for a while on this new phone, but also dissapear when the phone is unused for a while...
Could you guys check your phone's if you have the same problem?
Just use it for a while and check the volume control window if there are images still slightly visible on the screen.
Hope someone can do that for me!
edit.
Could i be SO unlucky that i have had 2 phone's of 1 wrong production serie?
Can anyone please check out their phone for the same problem?
I would like to know if there are more people experiencing this problem so that i dont have to return my phone for the 4th time =)
also i have spotted this problem. but it happened just a few times when the phone was hot (using gps).
Mmm ok, and you had the problem the exact same as me ? visible on the volume control screen etc?
More people having this problem?
Would appriciate it if some more of you could check it out for me
It never happened on my Fuze, I think it might be a bad batch that your store got in. That could be why when you returned it you're seeing the same things, a lot of people with yellow spots in their screen returned theirs and got the same thing in the next one.
All,
Im having some trouble trying to get the touchscreen to work properly..
I though it was a random bug with phone's the lock system [as i've never configured it nor used it before].. Several minutes after booting the touch screen would stop working, but all the bottons would work perfectly and respond on time..So i decided to flash the room..
Before flashing I did a hard reset [got hardspl], everything went ok until the calibration screen came up.. The first thing it asks you to do is tap it.. I have to tap it several tens of times and wait minutes [5-10] for it to respond.. I get to the white screen where the calibration cross appears, I tap it several times and wait some minutes but I guess the system thinks Im not taping in the right zone and just starts the process all over again..
I have no idea that's going on with the touch screen.. Can't use the phone at all..
Restore your handset to Stock SPL and Stock ROM
Return your device to HTC/Carrier for a replacement
unless of course the fault is your own, they shouldnt have too much of an issue with that
I live in Costa Rica.. They don't even sell HTC here, neverless a replacement and its oow anyways..
I think its related to the digitizer, i applied some pressure on the lower left side and it's working now, will most likely fail again though..