I flash my XV6700 and damaged the radio, when boot, it saids radio: No. So i want to recover the radio part via MTTY. But anybody please tell me the RADIO ROM OFFSET and size in Mtty.
radio fix
I know this is an old post but I'll update anyway.
it's possible you may have blown the radio on the upgrade.
However I would make an attempt to install a current radio rom.
those can be found at ppcgeeks.com
I'm running the radio 1.41 and am on Verizon.
If you are using Sprint try the 1.27
Another question
I am having the same problem with my xv6700(verizon). Everythingon my phone works fine. PC connection and wifi,etc.. My raido NONE.. When i try to download any program i get the error 120. Frome sprint,verizion,apache,utstarcom,etc.. Same thing everytime. I am at a lost for words any opitions. Any ideas or is it dead?? Thanks from a newbie Chris
Related
Hi!
I asked this question first on another board, but XDA-Dev is for me the best board when it come to hard question.
So here's the problem : I think I messed up my device while trying to flash it with a french rom.
I edited the rom and swaped the headers with Hexedit from the english roms to the french roms in :
RadioFS.nbf
RadioOS.nbf
CEOS.nbf
EXTROM.nbf
But here's the problem... while flashing the device, the RadioOS is stuck at 0.1%.
If I remove the RadioOS.nbf & RadioFS.nbf from the hpRUU.ini then it flash the unit, and everything is ok except that I cannot active the Radio (cell phone), it lookup the device.
Here's what I see from the Asset Viewer:
Radio Present : Yes
Radio Firmware Version :
Radio Protocol Stack Version :
Radio Bootloader Version :
Radio File System Version :
Default Radio GDFS Version :
I've tried to reflash the device with bigrom, but no luck, it just flash CEOS.nbf & EXTROM.nbf.
Finally, if I try to flash de device from windows with the ROM12132Beta (with activesync disabled) I get an Error 514 message : device failed verification. So I hacked the rom to get it to flash (with hexedit I replaced the 3 letter language with blank space) but it get stuck at 1.0%.
So do you know if there's is a way to force the flashing of the RadioOS.nbf & RadioFS.nbf? (maybe directly from the SD card?)
Thank you very much in advance!!
Please anybody has a little idea?
Because since this is a US device and I'm in Canada I'm not covered by the warranty, so I'm really screwed. I understand this is an HP device, but it is manufactured by HTC and I'm sure that if there's a place where there's people that know well the HTC devices, it's here.
I have the same problem. I'm going to use a sd card to reflash my HW6515. Did u solve the problem?
Not really... I sent it back for repair...
Not really great because this mean I'm 2 months without my PDA
You can also check this thread at BuzzDev :
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=28&id=23221#23221
Fuzy said :
PS.
When flashing sometime the process stop at1%. I hard reset and started flashing again. Finally after repeated trials, flashing was successefully. So, try to insist.
fuzy
Click to expand...
Click to collapse
Hi!
It's the first time I'm posting here, but after some days of search, I've found a lot about upgrading / downgrading, but nothing about my problem.
I've an MDAcompact / T-Mobile PM10A / Austria and tried to upgrade to BigStorage-Rom according this thread: " Magician to 1.13 + 1.13 Radio + BigStorage ALL-IN-ONE Guide ". I've backed up my original Rom, but after the flash, there was no radio-stack at all (booting device: "no GSM" on display).
I've tried to update the radio-stack again - error message: 114 - error upgrading radio-stack, the same with 1.12 and 1.13. I've tried to downgrade the rom to 1.12 - ok, but no radio-stack. I've tried to restore the original Rom via SD-card in bootloader-mode - device says: not allowed.
Can anyone help me?
Thanks in advance!
did u try to use an origional rom? i mean a non Bigstorage rom upgrade ? because that should fix the problem ( atleast i think it shoud)
Try Downloading the origional t-mobile1.13 rom and upgrade ur device using that install file . If i am not mistaken the first thing that is upgraded is ur radio stack then the extended rom and finally the operating sytem ( if u upgraded u would see that it does it in 3 steps).
I've tried that. As soon, as I upgraded to the original rom from T-Mobile, it stopped at the radiostack-upgrade. After that, I opened the "original".exe-file from T-Mobile with winrar and tried to upgrade again, but without the "radio.nbf"-file, what was no problem. After that, I tried to update with the "radio.nbf"-file (stand alone) again, but the "error 114"-statement came up again.
I got this error before, but only because I flashed my device with the wrong ROM.
(...I once misread "Universal" as a meaning and not as a device codename, and flashed the wrong Radio stack. Thing worked, but radio invalid, no phone capabilities. Fortunately, a reflash with the correct radio ROM found here saved me. And my $300 investment. -.-)
Either the radio part of the ROM's accidentially corrupted (download again), or the radio driver is incompatible with your device hardware. I'm not aware of Minis being avaliable in anything other than GSM tho...
I downloaded the original rom-version from the official T-Mobile website. Fact was: up/downgrade of the rom itself "ms_.nbf/nk.nbf" no problem (I've extracted the exe-file via winrar to a folder and made that several times to up/downgrade), but update of the radio-stack "radio_.nbf" not possible, ended in error 114. The point is: as soon as I start the update-utility, it shows the "Device CE Image version", "Device Extended Image Version" but no "Device Radio Image Version", it looks like no radio-stack is installed at all.
I got that exact same error through the aforementioned Universal ROM debacle (-.-). Radio failed to flash, no radio at all.
There should be a standalone radio stack somewhere in the FTP for magician. I know I saved mine with the 1.12.00 version. Try flashing with that, there's a file inside that allows you to bypass the version detection IIRC (which allows a from-scratch flash). Flashing a standalone radio stack will hard reset your system, but otherwise will not touch anything else.
hi, i have a g3 prophet with ipl ver. 1.00 and spl ver. 1.00.0000
i've just upgraded to pdaviet 4.0.0.4 PV and everything works flawlessly. however, due to wifi connections dropping i upgraded my phone's radio firmware from 1.13 to 2.19, the known version without bug with the pdaviet firmware.
installation is flawless but now my prophet can not boot , i just shows the dopod screen and resets continuosly. please help
i tried reupgrading with the newer radio version, but the installer said that it can not install, eventhough i have put my prophet in the three colour screen (bootloader) help me
You tried to restore old radio to phone , if not .
TOLD me ! i help u !
i dont have the old radio installer, it is 1.13 and can't find it anywhere.
also, i tried to upgrade to newer radioand reinstall rom, but the installer can not recognize my dopod, altough i have put it in the bootloader screen and connect it via usb.
it says error [300], invalid update tool. i have tried the 2.69 radio, 2.19 radio, and even the AKU 2.2 installer, and all of them return the same message.
please help
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
I am an Australian ADP1 user, I installed the radio update on JF's post. And as soon as I did this my could no longer get a data connection. I have been using my G1 data fine for over 3 months no problems. But as soon as the radio update went in, I could no longer get a data connection. The APN settings have remained the same.
The default settings for Telstra (http://telstramobile.custhelp.com/cgi-bin/telstramobile.cfg/php/enduser/std_adp.php?p_faqid=2855) which I had been using is telstra.internet.
However for some reason when I change the APN to the WAP settings
telstra.wap, a data connection can be established. I do not want to be charged the WAP prices, and have been trying to find the original radio image on the ADP1.
Can someone please link me to the original adp1 image?
Or help me able to connect to telstra.internet again?
Thanks for your time.
!edit! forgot to write in...what I really am looking for is the original adp radio.img file.
I'm in the same situation... Anyone have the original radio image to ADP1?
Unless the radio images are different between the tmobile version and the ADP, you can reflash the RC29 firmware with the .nbh file. Afterwards you could update your phones firmware as usual.
I'm not completely sure about this so maybe it would be best to get a second opinion. Can anyone confirm this?