OK guys, need your help on this one. I have a Qtek S200 and I wold like to change my ROM to a newer one. I have only one problem. After ROM flashing is done you are supposed to do a hard reset. Only problem is, my 'send' button doesn't work (previous owner wasn't very careful with the device). My question is, can I change one of the hardware button's function in the registry (or somewhere else) and do a hard reset after flashing a new ROM?
Thanks in advance,
moederfietser
I don't think such reg hack exists. Even IF it works, the hardresetting procedure does not go through the register, so whatever you might do that might work while in operation mode (eg normal mode, in WM5), it WILL not perform the same when you are hardresetting. You can only do a hardware fix (eg send to a store or DIY).
Related
Hi,
I tried to search the forum, I googled around, but I seem to be the only one with this problem:
sometimes (I can't specify it anymore, there is not routine in this problem!) when I open my camera the screen stays black, as if the camara was covered with something (which it isn't, of course!)
I already hard resetted my Crouise, problem was fixed for like 2 weeks, but today, problem turned up again.
Soft reset does not help... any ideas except throwing it at some hard wall?
Edit: Phone is really slow when this problem come up and the only way to leave camera mode is to press the red phone button or do a soft reset
Sounds quite bad, may be a hardware fault...
One hard reset temporarily solved the problem, if you did the hard reset again would it again solve the problem (for a while?). Backup all your files and give it a try.
If not then it may be a hardware problem, in that case I would recommend you send it back to HTC or O2.
If it temporarily solves the problem then it is probably a software issue - I would recommend you try flashing a new ROM, or flash the original ROM.
Just a suggestion...
I did a hard reset again today, backing up my Files via Spite Backup, but after reseting, Camera still isn't working...
Recovering the backuped files didn't help either...
F**k, I really don't want to sent the phone in, because I only have this one, and I sure it's gonna take some weeks to get a replacement...
Is there any way of reinstalling the camera...*hoping for hope*
I have exactly the same problem and i haven't find annything to fix this.
Need some help please
I've got the same problem, I have only find (for my case) some situations...
If you turn on the pda, it works.
if you wait for a while, it works again.
if you wait for some hours, it stop working...
then, if you regular turn off and on the pda, is not secure that it works.
If you soft-reset, it works.
If you keep the pda connected via usb or ac cable, it works everytime (I'm testing it now and it's from this morning that the cam works perfectly).
So I think is a only software problem, exactly I think is apmd error.
Power saving shut down cam device, and when you click camera.exe, the os is not so quickly to return on the device...
I ask to the experts (not me, obviously) if it can be a possibility...
Also can I set, only for cam device, the power saving disabled? So I can test my consideration better?
Thanks
Ok I should have my new unlocked Kaiser tomorrow, I've worked with a 8125 then my current 8525 and now I'm going to the 8925, I've been able to flash all my previous models without ever having any issues, but I have a question abuot the Kaiser...
Is it this different with this flashing procedure?
Flashing Via ActiveSync
1. Sync phone with computer and run the KaiserCustomRUU.exe from the Roms' Folder.
2. Once phone finishes flashing and gets to the screen where it configures the stylus, HARD RESET (press left and right softkey buttons on the front and hold in reset with stylus until message appears).
3. When prompted, Press "Send Button" (Green Call Button on Front) to Clear Data.
4. When prompted, Press "Send Button" (Green Call Button on Front) to Restart Phone.
5. Follow onscreen instructions to set up your New Rom.
Click to expand...
Click to collapse
All of my other phones never needed a "hard reset" after I would send a rom to it.
I only want to check and see if this is a required step so I can start to remember to do it ever rom upload
I've seen a "hard reset" screen but what info does this replace with manufacturers defaults? Connection stuff or is it more than that?
My other question is about the Radio's they seem to be more sensitive to roms on the 8925 than the 8525, I've had my 1.47.30.10 radio on my 8525 through multiple roms, and only had it replaced when I had to reflash the unit with the factory AT&T WM5 rom. Will all the roms on here either have a radio suggestion? OR one included with it?
I'll be reading up on the radio thread today and that may answer some of my questions on that.
BerettaFreak said:
Ok I should have my new unlocked Kaiser tomorrow, I've worked with a 8125 then my current 8525 and now I'm going to the 8925, I've been able to flash all my previous models without ever having any issues, but I have a question abuot the Kaiser...
Is it this different with this flashing procedure?
All of my other phones never needed a "hard reset" after I would send a rom to it.
I only want to check and see if this is a required step so I can start to remember to do it ever rom upload
I've seen a "hard reset" screen but what info does this replace with manufacturers defaults? Connection stuff or is it more than that?
My other question is about the Radio's they seem to be more sensitive to roms on the 8925 than the 8525, I've had my 1.47.30.10 radio on my 8525 through multiple roms, and only had it replaced when I had to reflash the unit with the factory AT&T WM5 rom. Will all the roms on here either have a radio suggestion? OR one included with it?
I'll be reading up on the radio thread today and that may answer some of my questions on that.
Click to expand...
Click to collapse
Use the search. This has been already answered.....................
Thanks for the classic "newb" answer.
Closed.....
Asked & Answered, you've found the info, why start a new thread to confirm what you've already harvested from other threads.
Posted this over at PPCGeeks, but since there is a bigger GSM following over here, thought I might try and see what you guys think.
As the title states, something bizzare happened yesterday and everytime i open the physical keyboard it freezes my device andd i have to soft reset. only thing i can do is use the soft keyboard which defeats the purpose of having this device. i must have hard reset a dozen times and i even loaded the stock ROM again thinking i had a corrupt file system. fuunny thing is before and after hard a hard reset and I load the stock ROM and the device starts it to load the customization bloatwares it hangs on the ozim .cab instal and i am forced to soft reset to get it going. i am baffled. i called at&t and they are mailing me a new Fuze, but in the meantime i would like to to troubleshoot the device and get it working because i have no idea when i will get my new device. i am tempted to load a custom rom but i am convinced its a hardware issue. so any ideas, advice, they are all welcome, and if someone can extract the keyboard driver into a cab maybe i can give that a try. thanks in advance.
Flashed to RSW's 1.5 Fuze ROM and I still have the same issues. Could my system be corrupt, is there something in the registry I might look for?
Hi I have looked through all the forums for my issue but I cannot seem to find my solution. I love the vibration on connect feature but I have not been able to get it to work. I have it checked in the advanced phone settings, and have looked in the registry "HKLM\Software\HTC\PHONE\PhoneExtendSetting\ConnetingVibration" and the value is set to 1, but it still never seems to work for me. I was wondering if someone could help out with that, I would highly appreciate it.
Thanks a lot ,
Mikel
assuming that you have already performed a soft reset in this case, I think you should try to change the registery value back to 0 and then try to "activate" it via the actual menu on the settings option. and do another soft reset.
I hope that helps. otherwise, if all else fails and nothing is helping, a hard reset should solve the problem.
good luck
Vibration on Connect still not working
I tried all those things and still have no luck! Do you have any other ideas?
you even tried the hard reset? That usually clears everything back to factory settings.
If that's the case then it might be the rom that you are using.
At this point, i think you are beyond my scope of knowledge (which isn't much in technical details). Hopefully one of the more experienced members here will provide you a better answer than me.
Vibration on connect
Yes Im using the chrome rom and that could be the issue. If there is anyone who could help me with this that would be greatly appreciated!
which dialer does it use? is it the standard htc dialer that came with your phone? or is it the newer tachi dialer? google or youtube these if you don't know the difference between them. I suspect that you have the newer tachi dialer, which doesn't actually work with vibrate on connect with the fuze . If it's the older dialer (ie on a stock rom) then i would recommend hard resetting to get it back. good luck!
ps make a signature with your rom and radio etc or put it in your question so others know what you're running
Hello guys,
As everyone, my added words from xt9, disapear after a soft reset, wich is quite annonying.
I know it's a bug from HTC, but I wanted to know if somenone had a solution either for the words not disapear, either to make a simple backup and recover them automatically after soft reset?
Check here for possible solution
Thanks for the reply but those guys are talking from hard reset and several methods are using a soft reset (which, in my, and probably your case, clear all the added words).
My question was more clearly, does it happen to other users too? (Is it ROM dependant)
And does it exist a method or a cab (which will, for exemple, make a regular copy of the eXt9.exe and copy it again just after a soft reset)...
juju66 said:
Thanks for the reply but those guys are talking from hard reset and several methods are using a soft reset (which, in my, and probably your case, clear all the added words).
My question was more clearly, does it happen to other users too? (Is it ROM dependant)
And does it exist a method or a cab (which will, for exemple, make a regular copy of the eXt9.exe and copy it again just after a soft reset)...
Click to expand...
Click to collapse
AFAIK, it is a common issue with WM6.5 as I have seen many threads regarding this issue.
I know of no automatic way to backup and restore the eXt9 files on soft reset, but whether a soft reset or hard reset, the manual results would be the same.
Sorry...
Found this, it may help, but still not automaitc