I have HTC 3300 (Artemis).
Suddenly I can't connect via my USB connection. I connect the USB cable, and the charging light start working (so there is a connection), but ActiveSync doesn't respond. I tried to HR the device - but problem doesn't resolve. I tried connect through another computer - nothing.
It seems that the problem is in my PDA, doesn't it? But I can charge it with the USB cable, so there is a connection.
Can someone please help me???
Related
I don't know why, but ever since i got my USB keyboard.
when i plug my phone in to active sync my keyboard and mouse acts up.
it's like it turns it self on and off.
i type or move for 5 seconds then it stops.
it also seems like it seems to be moving between windows?
like and alt-tab kinda thing.
cuz the IE window would got active and unactive.
am i making any sense?
does anyone else have this problem?
thanks!
bump, please help.
Active synce used to work great on PC but now it's acting up.
I recently replaced my KVM switch with a USB one, so i can use my USB keyboard and wireless mouse.
but ever since I did this, when i plug my phone in to active sync my keyboard acts up.
it's like it turns it self on and off.
for example, I'm chatting with someone, i type for 5 seconds then it stops, and i have to click on the window again.
am i making any sense?
does anyone else have this problem?
the PCI usb port has 4 ports, on it, it has an external 4 port USB hub, 1 usb cable that i use to plug my phone in to sync or d/l pics from my camera, and one port for the KVM switch. could it be my USB port is overloaded?
So i decieded to plug my phone into a USB port on the motherboard. the same problem happens!
so does it rule out my PCI usb ports were over loaded?
I also tried just leaving in the KVM and plugging in the phone. the samething happens!
does anyone know what could be causing this? I installed and reinstalled active sync many times.
Please help me!
hmmm !strange behavior,I'm using both a usb Logitech wireless keyboard and a usb cordless Logitech MX 1000 Laser Mouse.I have also got a separate usb cable attached for my phone,which I use very regularly,but have never had any sort of problem.
Although, I have eight usb ports on my PC,I have plugged each to a separate usb port,well as there are some usb ports in your PC which are cable to work as usb2 while are cable only usb1 data transfer.Checkout and try to connect to ports with usb 2 data transfer capable,check if it works.
secondly,disable 'connection through usb' option in the Activesync and connect the phone with the pc via usb cable and check or there's another option in the Activesync to enable connection through network connectivity or something,as I don't have the Activesync installed in my PC at present ,I can't tell you about it at present.
thirdly,which windows are you using ? if you are using winxp than upgrade to sp2 ,it'll upgrade your usb drivers automatically or download usb update drivers from Microsft site and update your usb drivers,hope it'll solve this problem.
Cheers
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Ray_jai said:
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Click to expand...
Click to collapse
This option enable network connections or somthing is available in the settings option of the Activesync.Right click the small icon in the Task bar of Activesync near the clock icon and you'll get the settings option,check out if this helps,good luck
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Ray_jai said:
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Click to expand...
Click to collapse
Glade you got it worked out,no I'm not using Setpoint,
Cheers
My Fuze all of a sudden, when I plug it into my computer via USB, doesn't launch the USB to PC connection manager, and my computer doesn't recognize my device. My Fuze still draws power and charges through the USB cable, but I cannot Active sync it or put it into Disk drive mode. I've tried it on three seperate computers with the same result. Is something wrong with my Fuze? I've tried flashing several different ROMs with the same result. I've tried it through my headphone adapter and my TV out cable with the same result. Please Help, this is very frustrating.
Please can someone help. This is incredibly frustrating. Even if I can warranty exchange the phone, I can't flash back to standard SPL, because I can't sync to my computer to flash it.
hollywould said:
My Fuze all of a sudden, when I plug it into my computer via USB, doesn't launch the USB to PC connection manager, and my computer doesn't recognize my device. My Fuze still draws power and charges through the USB cable, but I cannot Active sync it or put it into Disk drive mode. I've tried it on three seperate computers with the same result. Is something wrong with my Fuze? I've tried flashing several different ROMs with the same result. I've tried it through my headphone adapter and my TV out cable with the same result. Please Help, this is very frustrating.
Click to expand...
Click to collapse
That is really strange. Have you tried looking at the setting in: Start - Settings - Connections tab - USB to PC?
Yeah, its all normal. I have it set to ActiveSync(Synce withOutlook)
I have Enable advanced Network checked(even unchecked it doesn't work)
and I have it to ask me about connection type when connected. The connection type never pops up when I plug in though.
Solved
The two USB cables I was using were broken or something, because now with a third USB cable I tried it works fine.
might be too simplistic, but i've made a similar mistake before...
are you checking the screen that appears on your fuze when you connect the usb cable? is the 'use as modem' option checked by accident?
EDIT: nevermind, didn't read your entire last post.
The weird part is that the USB cable that came with the Fuze no longer works. Maybe its the ROM I'm running?
Had the same problem. The fix for me was to open Active Sync on the phone and manually click sync. After that, all was good.
All of a sudden my laptop does not connect to my phone....I tried a numbe rof things...I reinstalled the drivers.....etc...
is there something I am missing?
WHen I connect....the battery charges.....but I do not get anything in the drop down notifications bar...I rebooted puter also...
this happened all of a sudden.....was able to connect before...
I did try other usb ports also
thanks in advance
What about a different cable?
what rom/kernel were you running when it happened? as asked before have you tried a different cable? is USB debugging mode checked under development settings? if it is uncheck it and try connecting then do vice versa... also can you try and connect to another pc if possible, that can help determine if the problem's with the phone or the pc
edit: also again if possible can you take the cable you were using and connect another smartphone or device to your pc, then to a second pc as well? this should rule out the cable if it works
Hi,
Thank you for the forum (first post).
Trying to get the S6 recognised by pc:
When the phone is connected to the laptops usb port via micro usb and cable (usb debugging on, samsung usb drivers downloaded, mtp:usb on) the computer makes the 'plugged in' audio sound but there is no 'permission to transfer files via usb' type message.
It does charge.
Does this maybe mean the charging port is broken/damaged, or the usb is broken?
Only other detail is that I once got the computer to say in a pop up that it was labelled as a 'samsung s6' rather than unknown device, which it normally does. This any symptom maybe its just a software issue?
Trying to get my computer to connect to the phone and have tried most if not all software solutions so far (including factory reset) and now looking if its hardware. Any tips to get it connected welcome.
Thank you,
David
david7632 said:
Hi,
Thank you for the forum (first post).
Trying to get the S6 recognised by pc:
When the phone is connected to the laptops usb port via micro usb and cable (usb debugging on, samsung usb drivers downloaded, mtp:usb on) the computer makes the 'plugged in' audio sound but there is no 'permission to transfer files via usb' type message.
It does charge.
Does this maybe mean the charging port is broken/damaged, or the usb is broken?
Only other detail is that I once got the computer to say in a pop up that it was labelled as a 'samsung s6' rather than unknown device, which it normally does. This any symptom maybe its just a software issue?
Trying to get my computer to connect to the phone and have tried most if not all software solutions so far (including factory reset) and now looking if its hardware. Any tips to get it connected welcome.
Thank you,
David
Click to expand...
Click to collapse
have you gone thru the usual suspects? (diff cable, usb port, diff computer altogether, blah blah blah)
Same happens here, it was fine after flashed Rom now it wont recognize it for some reason
When I connect my POCO X3 to a USB 2.0 port on laptop, the device keeps disconnecting and reconnecting to the extent that my laptop notifies that this USB device is not recognizable. on connecting the device to a USB 3.0 port nothing happens. The phone is not even detected. Used the same cable to connect my POCO M2 PRO to the same USB 2.0 port on the laptop and all is fine. There is no issue in charging the device. Anyone else facing this? Is this a software issue? I hope so .
Is there an alternative way to transfer files (faster) from PC to phone?
Mine works fine on usb 3.0 but disconnects on 2.0. I did have adb drivers installed when I connected the phone.
use share me through wifi
Hey, I think you should try different USB port or system first. Even after doing so, still your USB keeps disconnecting and reconnecting then must reformat your USB drive. Hope this will help you…!