When I connect my POCO X3 to a USB 2.0 port on laptop, the device keeps disconnecting and reconnecting to the extent that my laptop notifies that this USB device is not recognizable. on connecting the device to a USB 3.0 port nothing happens. The phone is not even detected. Used the same cable to connect my POCO M2 PRO to the same USB 2.0 port on the laptop and all is fine. There is no issue in charging the device. Anyone else facing this? Is this a software issue? I hope so .
Is there an alternative way to transfer files (faster) from PC to phone?
Mine works fine on usb 3.0 but disconnects on 2.0. I did have adb drivers installed when I connected the phone.
use share me through wifi
Hey, I think you should try different USB port or system first. Even after doing so, still your USB keeps disconnecting and reconnecting then must reformat your USB drive. Hope this will help you…!
Related
I don't know why, but ever since i got my USB keyboard.
when i plug my phone in to active sync my keyboard and mouse acts up.
it's like it turns it self on and off.
i type or move for 5 seconds then it stops.
it also seems like it seems to be moving between windows?
like and alt-tab kinda thing.
cuz the IE window would got active and unactive.
am i making any sense?
does anyone else have this problem?
thanks!
bump, please help.
Active synce used to work great on PC but now it's acting up.
I recently replaced my KVM switch with a USB one, so i can use my USB keyboard and wireless mouse.
but ever since I did this, when i plug my phone in to active sync my keyboard acts up.
it's like it turns it self on and off.
for example, I'm chatting with someone, i type for 5 seconds then it stops, and i have to click on the window again.
am i making any sense?
does anyone else have this problem?
the PCI usb port has 4 ports, on it, it has an external 4 port USB hub, 1 usb cable that i use to plug my phone in to sync or d/l pics from my camera, and one port for the KVM switch. could it be my USB port is overloaded?
So i decieded to plug my phone into a USB port on the motherboard. the same problem happens!
so does it rule out my PCI usb ports were over loaded?
I also tried just leaving in the KVM and plugging in the phone. the samething happens!
does anyone know what could be causing this? I installed and reinstalled active sync many times.
Please help me!
hmmm !strange behavior,I'm using both a usb Logitech wireless keyboard and a usb cordless Logitech MX 1000 Laser Mouse.I have also got a separate usb cable attached for my phone,which I use very regularly,but have never had any sort of problem.
Although, I have eight usb ports on my PC,I have plugged each to a separate usb port,well as there are some usb ports in your PC which are cable to work as usb2 while are cable only usb1 data transfer.Checkout and try to connect to ports with usb 2 data transfer capable,check if it works.
secondly,disable 'connection through usb' option in the Activesync and connect the phone with the pc via usb cable and check or there's another option in the Activesync to enable connection through network connectivity or something,as I don't have the Activesync installed in my PC at present ,I can't tell you about it at present.
thirdly,which windows are you using ? if you are using winxp than upgrade to sp2 ,it'll upgrade your usb drivers automatically or download usb update drivers from Microsft site and update your usb drivers,hope it'll solve this problem.
Cheers
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Ray_jai said:
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Click to expand...
Click to collapse
This option enable network connections or somthing is available in the settings option of the Activesync.Right click the small icon in the Task bar of Activesync near the clock icon and you'll get the settings option,check out if this helps,good luck
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Ray_jai said:
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Click to expand...
Click to collapse
Glade you got it worked out,no I'm not using Setpoint,
Cheers
Something's wrong with my USB Port.
since about 1 week I installed new Custom ROM, so, from KOT49 to KVT49.
Sometimes it charges normally, sometimes I need to SHUTDOWN device so it charges normally again.
USB connection(USB DEBUGGING or Normal) it constantly connects and disconnects from PC.
What I just noticed is that when N% is connected to PC, kinda pull down Status/notification bar is laggy or it's not responsive.
Is it may usb port faulty?
regards
EDIT:
On FASTBOOT MODE it doesn't disconnect at all, so, don't know if it's USB PORT related
Hello everyone.
I am having issues with my Note being detected by my PC, I have installed Kies 3 and when the Note is connected the connection process starts but fails ( I tried using camera mode instead of MTP and Kies says It must be MTP so something is connecting), Also the device is detected in the device manager of the PC and the Note itself says its connected by USB 3.0.
I have updated, un-installed re-installed, all the drivers and Kies. I have also used a standar USB 2 cable and most of the ports on my PC.
Does anyone know what's going on? could it be a USB 3 issue with Windows?
Any help would be appreciated.
Cheers
Gav
I've been having consistent issues connecting with the tablet through adb, on both linux (2 separate installs), and windows 8.1. Sometimes it just will not detect it. It gets detected as mtp storage fine, but adb devices returns nothing. Ill triple check all the relevant settings, make sure the computer has been authorized by the tablet etc. It will literally work just fine, and then 10 minutes later without even disconnecting the cable to using the tablet, it will no longer be detectable by adb.
I'm hoping it's just bugs in the release firmware that haven't been ironed out yet, and will disappear with future upgrades or with the flashing of a custom rom.
I've also had it refuse to charge through my laptops USB ports, even the special "faster charging" port.
It turns out my issue was the unit itself I took it back to JB-HiFi and the staff checked it out and it wouldn't connect to any of their PCs, we tried the Demo unit and it worked fine, So i exchanged it and it works perfectly..
Thanks for your reply though
Cheers
Gav
I think I've exhausted my options, hopefully somebody here has an idea.
From day 1, my TF300T has been unable to connect to a PC. At first I thought it was because one of my cats chewed on the USB cable before I could try (it still charged, just no PC connection) so I didn't do anything while it was still under warranty.
Since then, I've tried 3 different cables, multiple PCs and a Macbook, and I can't get anything out of it. It's not detected at all by the computer - no unknown device, no prompt for drivers, no device connected sound when I plug it in. No reaction on the tablet either, whether USB debugging is on or not. I also tried replacing the USB port on the tablet, but got the same thing. I doubt it's a driver issue since I'm not getting anything at all on either end of the connection.
It DOES connect to the dock ok, and all the dock functions seem to work. I've tried connecting the USB cable to both the tablet directly and the dock, and I get nothing from either port.
I'd really like to be able to flash custom ROMs on it, and I can't find a working way to root or flash it without a functioning USB connection. Could it be the third-party USB cables giving me problems, and if so, is there one that actually works? And if not, is this just a lost cause?
Phone is rooted and on android 10 and xxxnolimits installed
I connected phone to pc and only charging. Tried 3 different cables, including official one and 3 different USB ports and not showing on pc. I can hear noise it's connected to pc but then another noise to disconnect
Usb debugging is enabled and default usb configuration I can change to file transfer, usb tethering , midi, ptp & no data transfer. I changed it to each of them still not showing
There is no option to choose mtb from drop down notification no notification is there
I rebooted phone and pc and cleared cache. Also i app settings allowed notifications.
I'm at the end of my tether trying to figure out what issue is as was working previously.
Now all its doing is charging
Any suggestions
funkyirishman said:
Phone is rooted and on android 10 and xxxnolimits installed
I connected phone to pc and only charging. Tried 3 different cables, including official one and 3 different USB ports and not showing on pc. I can hear noise it's connected to pc but then another noise to disconnect
Usb debugging is enabled and default usb configuration I can change to file transfer, usb tethering , midi, ptp & no data transfer. I changed it to each of them still not showing
There is no option to choose mtb from drop down notification no notification is there
I rebooted phone and pc and cleared cache. Also i app settings allowed notifications.
I'm at the end of my tether trying to figure out what issue is as was working previously.
Now all its doing is charging
Any suggestions
Click to expand...
Click to collapse
Do you have the latest fastboot-adb platform tools installed? Just a thought.
Will check
However usb notification drop down not coming up on phone to change settings when I plug phone into port.
Also plugged phone into USB port of car for android auto and not picking it up
If I restore a backup would that be worth trying or does issue seems to be with usb port on phone?
funkyirishman said:
If I restore a backup would that be worth trying or does issue seems to be with usb port on phone?
Click to expand...
Click to collapse
Try uninstalling and reinstalling usb google drivers on your pc ( or your appropriate driver's for your phone).
Install OEM USB drivers | Android Studio | Android Developers
Discover links to the web sites for several original equipment manufacturers (OEMs), where you can download the appropriate USB driver for your device.
developer.android.com
Are you talking about usb drivers?
I installed this one
OnePlus USB Drivers | Official
Download the latest version of OnePlus USB Driver for your OnePlus smartphone. OnePlus USB Drivers helps your OnePlus smartphone to communicate properly with your computer.
oneplususbdrivers.com
Still not working
Phone not showing up in device manager
Also tried the below and phone just keeps on rebooting
in Developer option > USB debugging ON
turn off phone
connect cable
turn ON phone
Still looking for a solution
Tried cable on old one plus 5 and it's working fine on pc
So must be phone
Any suggestions on what to try