Hello,
can someone tell me how to reinstall the MMS software after I've done the BigStorage ROM hack. I've got the Default_ArcsoftMMS-2.0.0.22-ma_ENU.cab from the FTP site but not sure what to do with it now! TIA
Just run the file. This would install the software. Nothing othe ris done by the extended ROM....
Stefan
Now that we have a proper working WM5 device out there (the Universal) has anyone attempted installing the MMS application for that on a Himalaya running WM5?
If the cab file can be extracted from the Extended ROM of the Universal then it's got to be worth a try right?
There is a downloadable CAB in the BlueAngel section of the FTP site, it was extracted from the Universal, however there are problems with installing it, it will not install saying it is not digitally signed.
Hopefully someone will come up with a solution to this soon.
I've tried the solution to install properly , the cab ... let me release the cab ...
be patient
ok ..
Arcsoft mms composer was extracted from universal rom and a cab file was made to work with BlueAngel.
On Himalaya device , this cab don't install .
I've found the cause : 2 file
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
I've managed a cab file with all other files and reg settings ...
I've create a rar , with this cab and the 2 dll
To install , follow the instructions :
1. Download AMmsC_XDAII_WM2k5 here
2. Decompress the rar file where you want in your computer
3. Soft reset your device
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on XDAII
5. Run the cab file on your XDAII
6. Soft-reset your device again
After this , go to E-mail application ...
he he , you should see a MMs account !!!!
go to menu/ Mms Configuration and set your server like in old version of mms composer !!!
Enjoy !!!
@TofClock
i've installed all the files you instructed, done w/ soft reset also but im quite confused on the last portion of your instruction.(see below)
After this , go to E-mail application ...
he he , you should see a MMs account !!!!
go to menu/ Mms Configuration and set your server like in old version of mms composer !!!
can you elaborate on this??
thanks
ok , well
If any MMS account appears , just follow this steps :
Go to Menu/Tools/New account
in email , just write [email protected] then click NEXT
again NEXT to pass the automatic config
account name "e"
user name "e"
password "e"
then NEXT
for the type of account , choose "MMS"
in step 5 , write a in all the case then click FINISH
the MMS account should appear
after this , go to Menu/MMS Configuration
Server tab
New
and your server settings like in other Mms composer version
it's seems no working.....
buzz said that it works on 1.60c +
It works
@Fenix, bro how did you do it? it doesn't work on my end
by the way, my device info are indicated below.
would u mind if u can give me examples of data you use during setup?
i'll just use it as a reference.
many thanks,
It doesn't work on 1.50 version!
If you want MMS on magneto you have to upgrade to 1.60
thanks a lot sabby !
sabby said:
It doesn't work on 1.50 version!
If you want MMS on magneto you have to upgrade to 1.60
Click to expand...
Click to collapse
On 1.50 and all other security-enabled WM5 versions you need to copy Arc's files to your \windows folder manually and import Arc's registry settings. But you can also use other MMS solutions like Pixar MMS, EzWAP or MMSd
MMS WM5
Hi everyone
I've done as above but still can't get MMS to work,
I've installed the Cab to get MMS composer gone through the instructions found mms compers on the menu for messaging but when I want to send no function works as only say email settings
Also should there be an icon on the programms fiel for MMS composer
John
Dear all,
yesterday I upgraded my Magician from the 1.11 Firmware Versions to the T-Mobile BigStorage GER 1.13 (changed my Radio stack from 1.11 to 1.13 also).
Everything is fine as expected, but the Arcsoft MMS 2.5.0.28 from the matching ExtROM 1.13.129 is not working properly. When I send a MMS to my device, it keeps on opening Pocket Outlook, but nothing happens. When I close POutlook, it is immediately opened again. I can configure the MMS server, but the MMS Folders (Inbox, sent...) as in previous version Arcsoft MMS 2.0.0.22 are now missing.
I installed only the following CABs from ExtROM in this order:
BTHUSB_PATCH_AKU26.CAB
CAB-Acrosoft-MMS-2.5.0.28-DEU-MagicianAKU2.6-13May05.CAB
CAB-TaoJava-10.1.2.76-PPC-DEU-17Aug05.CAB
Did I miss anything?
Kind regards
Mundl
again?
as we said at your last thread with the same question:
Arcsoft MMS 2.5.0.28 needs some data from the callerID-cab, without them it won't work,
install the cab or extract this files >>>>
iacontacts.dll
DisplayCID.dll
ContactsSDK.dll >>>> to your windows path
kr!
please trik me sending more extension file(*.doc *.zip *.rtf) in mms arcsoft???
I just purchased an AT&T branded HTC Tilt and quickly located this forums for my tweaking needs.
I re-flashed to an HTC ROM and noticed I no longer have the option to send audio/video via MMS. In searching this forum I located and installed Arcsoft's MMS V.4.2.8.1 ... however I still do not see the option to send audio/video via MMS.
I'm looking for any assistance to get the MMS feature installed and working on my device.
I'm a Blackberry-convert and Window Mobile is an uncharted territory for me. Please be gentle ...
Thank you
bump
Bump ... can anyone help me get my MMS feature installed and working once again.
Thank you in advance
Drop the attached cab to your device through active sync, then using the phones file explorer locate the cab file and tick on it.. this will start the install process.... this will restore your att settings for mms and internet...
shogunmark said:
Drop the attached cab to your device through active sync, then using the phones file explorer locate the cab file and tick on it.. this will start the install process.... this will restore your att settings for mms and internet...
Click to expand...
Click to collapse
shogunmark:
Thank you for the response
I've downloaded and installed the CAB file to my Tilt, however I'm still unable to see the MMS function.
Other tha installing the CAB file, is there any configuration that I ned to complete before I can use the MMS feature?
Thanks again for your help.
I usually use PIM Backup for all of my backup needs, but it doesn't work with MMS. Does anyone know if Sprite/SPB will do a reliable MMS backup?
SPB will back up ur mms but u hv to manully back up the attachments on wm6. if u dont u hv a mms with missing attachments.
So that's just the My Documents/UAcontent directory?
sorry to bump this post, but want to upgrade to a 6.1 ROM tonight - can someone confirm that this will work?