Arcsoft MMS 2.5.0.28 Problem - JAM, MDA Compact, S100 Software Upgrading

Dear all,
yesterday I upgraded my Magician from the 1.11 Firmware Versions to the T-Mobile BigStorage GER 1.13 (changed my Radio stack from 1.11 to 1.13 also).
Everything is fine as expected, but the Arcsoft MMS 2.5.0.28 from the matching ExtROM 1.13.129 is not working properly. When I send a MMS to my device, it keeps on opening Pocket Outlook, but nothing happens. When I close POutlook, it is immediately opened again. I can configure the MMS server, but the MMS Folders (Inbox, sent...) as in previous version Arcsoft MMS 2.0.0.22 are now missing.
I installed only the following CABs from ExtROM in this order:
BTHUSB_PATCH_AKU26.CAB
CAB-Acrosoft-MMS-2.5.0.28-DEU-MagicianAKU2.6-13May05.CAB
CAB-TaoJava-10.1.2.76-PPC-DEU-17Aug05.CAB
Did I miss anything?
Kind regards
Mundl

again?
as we said at your last thread with the same question:
Arcsoft MMS 2.5.0.28 needs some data from the callerID-cab, without them it won't work,
install the cab or extract this files >>>>
iacontacts.dll
DisplayCID.dll
ContactsSDK.dll >>>> to your windows path
kr!

please trik me sending more extension file(*.doc *.zip *.rtf) in mms arcsoft???

Related

How to put back the MMS package after the BigStorage hack

Hello,
can someone tell me how to reinstall the MMS software after I've done the BigStorage ROM hack. I've got the Default_ArcsoftMMS-2.0.0.22-ma_ENU.cab from the FTP site but not sure what to do with it now! TIA
Just run the file. This would install the software. Nothing othe ris done by the extended ROM....
Stefan

MMS on WM5 idea

Now that we have a proper working WM5 device out there (the Universal) has anyone attempted installing the MMS application for that on a Himalaya running WM5?
If the cab file can be extracted from the Extended ROM of the Universal then it's got to be worth a try right?
There is a downloadable CAB in the BlueAngel section of the FTP site, it was extracted from the Universal, however there are problems with installing it, it will not install saying it is not digitally signed.
Hopefully someone will come up with a solution to this soon.
I've tried the solution to install properly , the cab ... let me release the cab ...
be patient
ok ..
Arcsoft mms composer was extracted from universal rom and a cab file was made to work with BlueAngel.
On Himalaya device , this cab don't install .
I've found the cause : 2 file
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
I've managed a cab file with all other files and reg settings ...
I've create a rar , with this cab and the 2 dll
To install , follow the instructions :
1. Download AMmsC_XDAII_WM2k5 here
2. Decompress the rar file where you want in your computer
3. Soft reset your device
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on XDAII
5. Run the cab file on your XDAII
6. Soft-reset your device again
After this , go to E-mail application ...
he he , you should see a MMs account !!!!
go to menu/ Mms Configuration and set your server like in old version of mms composer !!!
Enjoy !!!
@TofClock
i've installed all the files you instructed, done w/ soft reset also but im quite confused on the last portion of your instruction.(see below)
After this , go to E-mail application ...
he he , you should see a MMs account !!!!
go to menu/ Mms Configuration and set your server like in old version of mms composer !!!
can you elaborate on this??
thanks
ok , well
If any MMS account appears , just follow this steps :
Go to Menu/Tools/New account
in email , just write [email protected] then click NEXT
again NEXT to pass the automatic config
account name "e"
user name "e"
password "e"
then NEXT
for the type of account , choose "MMS"
in step 5 , write a in all the case then click FINISH
the MMS account should appear
after this , go to Menu/MMS Configuration
Server tab
New
and your server settings like in other Mms composer version
it's seems no working.....
buzz said that it works on 1.60c +
It works
@Fenix, bro how did you do it? it doesn't work on my end
by the way, my device info are indicated below.
would u mind if u can give me examples of data you use during setup?
i'll just use it as a reference.
many thanks,
It doesn't work on 1.50 version!
If you want MMS on magneto you have to upgrade to 1.60
thanks a lot sabby !
sabby said:
It doesn't work on 1.50 version!
If you want MMS on magneto you have to upgrade to 1.60
Click to expand...
Click to collapse
On 1.50 and all other security-enabled WM5 versions you need to copy Arc's files to your \windows folder manually and import Arc's registry settings. But you can also use other MMS solutions like Pixar MMS, EzWAP or MMSd
MMS WM5
Hi everyone
I've done as above but still can't get MMS to work,
I've installed the Cab to get MMS composer gone through the instructions found mms compers on the menu for messaging but when I want to send no function works as only say email settings
Also should there be an icon on the programms fiel for MMS composer
John

MMS on WM5.0 Himlaya Working! - Updated

** EDIT **
Aplogies for not crediting ncruz as the one who edited the original files and got this working in the first place!
As per his instructions, and to make everything a bit easier for everyone, I have updated the Himalaya cab file with his updated files
** EDIT **
Thanks to TofClock for the making the cab file! I've just taken his instructions and made them a little easier to follow, I hope he doesnt mind
The Arcsoft mms composer has been extracted from the Universal rom and a cab file was cerated to work with WM 5.0 Blueangel devices.
However this cab won't install on Himalaya devices.
This is because of the following two files
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
TofClock has created his own cab file (which I have now updated to ncruz newest versions) with all other files and reg settings ...
Attached to this post is are two RAR files containing a cab file and 2 dll files.
To install, follow these instructions :
1. Download Himalaya_WM5_MMS.part1.rar and Himalaya_WM5_MMS.part2.rar from this post.
2. Decompress the rar file on your PC using winrar or something similar
3. Soft reset your Himlaya
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on your Himalaya
5. Copy the cab file to your Himalaya and install it.
6. Soft-reset your device again
7. After this , go the messaging application. click on Inbox you should see a new account there called MMS.
If not click on Menu>Tools>New Account
Create a dummy email account (it doesn't matter what info you fill in, just make it up) but at the Account information select MMS as the account type and click next.
Then finish going through the account creation, again for the server information making anything up.
8. Once that is completed clock on Menu>MMS Configuration then click the servers tab.
9. From here fill in your operators server settings (remember to set it as default!) and enjoy MMS on WM5.0!!
Again thanks sooo much for everyone's hard work in getting this working, especially ncruz for the initial work and the BA cab and TofClock for making the Himalaya cab file.
Great, just another thing, thoose files aren't from universal.
First, thoose files are from MY POST, i've reshacked thoose files for qvga devices, so it really pisses me off when people take credits for things they don't to.
Second, at least use my latest rcdll.dll see my post at BA forum.
The one that's in THAT cab has some huge icons. and i have hacked it a little bit more.
Third, i've already resolved the problem of having to create the account by hand.
So, if you really want to do the thing right, get the cab at my post, open wincecab editor, remove rcdll.dll and arcmms.dll, install the cab, then copy the files you've just removed and copy them to \windows.
PS: you can check the original files from universal and see that they aren't the same.
everythin is done as explained before, and no mms account appears
please help me
THankssss
Working with WM2k5_1.60c.00WWE_XDA2_HIMALAYA
thanks mjames_84 for update the cab
GREAT THANKS to ncruz for your good job , without it , i never should made this cab
paketecuento -
Have you tried this previously using ncruz manual installation?
I had trouble with that method and once I tried it even after I used the cab file it wouldn't work I had to hard reset my device and do it again.
If you did try the manual install first then you may have to do the same, it certainly worked for me anyway.
As his cab file worked great once I had removed the two dll files and had done a hard reset.
Of course if you havn't tried the manual installation previously then it could be anything you might need to give more info on what ROM version you're using, software you have installed etc...
working 100%, once updated to 1.60c....
It's strange. On my device every time I try to install the cab file I get an error message while installing. I follow the instuctions as described...
Has anybody dealt with it?
Same problem here
Get a error when I start installing. Says that I should try a different location. I"ve tried my SD and PPC. Nothing works.
Download here
It's worked with my WM5V.1.60c!!!
But i use .dll files from mjames_84 and use .cab file from TofClock. I can send and recieve my MMS!!!
Thank you
I too tried mjames files and had problems.
However I also left mjames .dll files there deleted his cab file and used TofClocks' cab file and I now have working MMS.
Thanks all!
the dll in archive with my cab are same of mjames dll and ncruz dll , i've updated the rar
Hello, thank you for the great work!
But i have a problem, no way to getting it to send messages through Vodafone italy, i had already a Vodafone MMS connection setted up by my QTEK SD Configuration wizard (dloaded from dangaard site) which worked with WM 2003 but i have no way of getting it to work in WM 2005, i keep getting the error message that my mms has not been sent. Anyone can help me please?
Thank you very much
By the way, since i almost haven't any programming skill i have Eng/Ita translation skill ^_^, so if u are interested in translating the WM2005 ROM to ITA let me know, i can help ^_^
Hi overhere,
I did precies what you said at the top,
But when I want to start MMS I get an error about a bad cerificate or something like that... please help...
Klazimodo
It works !
Upgraded to wm 5.0 two days ago.
Installed as per instructions and my MMS's work like a charme.
Thanks guys 8)
Hi guys
I installed it, no problem with installation. Send mms, GPRS Monitor shows that the mms is sending but then I get a error that says unable to send.
What can the problem be?
Use WM5 1.60c and Radio 1.08
Thanks guys
dudes, Himalaya is ****ing full of those WMstuff, so will you people try to do something for ALPINE ?
Or XDA O2IIi ?
hi there
i am not able to install
i have xda2 win2005 1.60c
i downloaded both the rar files unrared these in two dif folders one is called part 1 and the other part2
then i softreset my xda
then i coppied dll files from part1 folder
then i try to install the cab file coopied from my pc to xda
i try to install on system
but message comes up says that MMS.... can not be install
am i doing something wrong here
and y there are two rar files containig the same files
PLZ help
Regards
its working now
thanx
regards
gugi

ACROSOFT MMS composer

im having a problem with my mms composer. specifically with acrosoft mms2.5.0.28-ENU-MagicianAKU2.6-13May06 cab file. i tried to reinstall it but the mms account doesnt show up. is there a latest and patched mms composer for xda II mini? where can i get it? thank you guys..
Did you perform a soft-reset after installing the cab file?
with acrosoft mms composer 2.5.0.28 you have to install Caller_ID_Magician_T-Mobile_WWE_RC22.CAB to make it work.

Can anybody post their WM 6.1 Threaded SMS files?

I have a T-Mobile Shadow and would like to use the new wm6.1 Threaded SMS program on it.
Can anybody post/attach their WM 6.1 Threaded SMS files?
In wm6 the SMS program is under \Windows and the files are:
tmail.exe
tmail.lnk
tmail.manifest.xml
tmailutl.dll
Thanks in advance!
...anybody?
Here you go enjoy
I managed to copy only 2 files. the other are protected anв can not be copied.
please guide on how I camn copy them for you
I Hope that is what you are asking for
good luck
I'm been trying to backup the original files and have the same problem.
tmail.exe and tmailutl.dll can't be copied and those are the files that I need to port SMS 6.1 to a WM6 device.
I'm been trying to kill the mail process using Celetask but it doesn't work.
Thanks anyway!
Will this help you out Freddy? It was ripped out of the Palm Treo and made to work with AT&T. Here is the link to the page with the download for the cab.
http://forum.xda-developers.com/showthread.php?t=376738
I can try it but one of the things that I liked from the wm6.1 version is that it is part of the OS. I've seem other SMS treaded software that need to be running in the background for it to work.
How is the Palm version?
Can it be used with T-Mobile?
I have heard of a lot of people using and liking that better than wm 6.1. threading.
Can I get one?
sniali said:
I managed to copy only 2 files. the other are protected anв can not be copied.
please guide on how I camn copy them for you
I Hope that is what you are asking for
good luck
Click to expand...
Click to collapse
Can I get those files sent to me also? Thanks!
[email protected]
I got the files and even created a cab file to install it on my phone but the problem is that it is not possible to overwrite the original files from the OS.
I'm still trying to make it work. I'll let you know when it works.
It will be nice,
cause i also looking the way to use tmail.exe from wm6.1!
We hope on your achieve!!!
Thanks
P.S. freyes01 did you tried to modify ROM WM6 , simply to add those files ?
Is it enough files to work tmail.exe ?
freyes01 said:
I have a T-Mobile Shadow and would like to use the new wm6.1 Threaded SMS program on it.
Can anybody post/attach their WM 6.1 Threaded SMS files?
In wm6 the SMS program is under \Windows and the files are:
tmail.exe
tmail.lnk
tmail.manifest.xml
tmailutl.dll
Thanks in advance!
Click to expand...
Click to collapse
i just tryed this and it dont work it said Tmail is not a valid Windows CE application heres the files anyway
I have only tmail.exe and tmailutil.dll from WM6.1
View attachment tmail.zip
If it helps you ))
rickwyatt
Did you tried to change ROM ?
May be need to replace poutlook.exe too ?
roma_pop said:
rickwyatt
Did you tried to change ROM ?
Click to expand...
Click to collapse
what do you mean?
i got the files from my Tornado wm6.1 dump
Just made own ROM WM6 with tmail.exe from wm6.1
In wm6 ROM replace tmail.exe from wm6.1 to check is it will work ?
In ROM you can change system files, so made own ROM.
woops, wrong thread
freyes01 said:
I got the files and even created a cab file to install it on my phone but the problem is that it is not possible to overwrite the original files from the OS.
I'm still trying to make it work. I'll let you know when it works.
Click to expand...
Click to collapse
Hi freyes01, so did you ended up successful with that cab file? Or is this project been abandoned and went straight into a ROM update instead??
WM6.1 comes with default threaded SMS, U can any time disable it, by going to HKLM\Control Panel\Microsoft\Inbox and set SMSAvailable to '0'

Categories

Resources