Now that we have a proper working WM5 device out there (the Universal) has anyone attempted installing the MMS application for that on a Himalaya running WM5?
If the cab file can be extracted from the Extended ROM of the Universal then it's got to be worth a try right?
There is a downloadable CAB in the BlueAngel section of the FTP site, it was extracted from the Universal, however there are problems with installing it, it will not install saying it is not digitally signed.
Hopefully someone will come up with a solution to this soon.
I've tried the solution to install properly , the cab ... let me release the cab ...
be patient
ok ..
Arcsoft mms composer was extracted from universal rom and a cab file was made to work with BlueAngel.
On Himalaya device , this cab don't install .
I've found the cause : 2 file
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
I've managed a cab file with all other files and reg settings ...
I've create a rar , with this cab and the 2 dll
To install , follow the instructions :
1. Download AMmsC_XDAII_WM2k5 here
2. Decompress the rar file where you want in your computer
3. Soft reset your device
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on XDAII
5. Run the cab file on your XDAII
6. Soft-reset your device again
After this , go to E-mail application ...
he he , you should see a MMs account !!!!
go to menu/ Mms Configuration and set your server like in old version of mms composer !!!
Enjoy !!!
@TofClock
i've installed all the files you instructed, done w/ soft reset also but im quite confused on the last portion of your instruction.(see below)
After this , go to E-mail application ...
he he , you should see a MMs account !!!!
go to menu/ Mms Configuration and set your server like in old version of mms composer !!!
can you elaborate on this??
thanks
ok , well
If any MMS account appears , just follow this steps :
Go to Menu/Tools/New account
in email , just write [email protected] then click NEXT
again NEXT to pass the automatic config
account name "e"
user name "e"
password "e"
then NEXT
for the type of account , choose "MMS"
in step 5 , write a in all the case then click FINISH
the MMS account should appear
after this , go to Menu/MMS Configuration
Server tab
New
and your server settings like in other Mms composer version
it's seems no working.....
buzz said that it works on 1.60c +
It works
@Fenix, bro how did you do it? it doesn't work on my end
by the way, my device info are indicated below.
would u mind if u can give me examples of data you use during setup?
i'll just use it as a reference.
many thanks,
It doesn't work on 1.50 version!
If you want MMS on magneto you have to upgrade to 1.60
thanks a lot sabby !
sabby said:
It doesn't work on 1.50 version!
If you want MMS on magneto you have to upgrade to 1.60
Click to expand...
Click to collapse
On 1.50 and all other security-enabled WM5 versions you need to copy Arc's files to your \windows folder manually and import Arc's registry settings. But you can also use other MMS solutions like Pixar MMS, EzWAP or MMSd
MMS WM5
Hi everyone
I've done as above but still can't get MMS to work,
I've installed the Cab to get MMS composer gone through the instructions found mms compers on the menu for messaging but when I want to send no function works as only say email settings
Also should there be an icon on the programms fiel for MMS composer
John
Related
** EDIT **
Aplogies for not crediting ncruz as the one who edited the original files and got this working in the first place!
As per his instructions, and to make everything a bit easier for everyone, I have updated the Himalaya cab file with his updated files
** EDIT **
Thanks to TofClock for the making the cab file! I've just taken his instructions and made them a little easier to follow, I hope he doesnt mind
The Arcsoft mms composer has been extracted from the Universal rom and a cab file was cerated to work with WM 5.0 Blueangel devices.
However this cab won't install on Himalaya devices.
This is because of the following two files
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
TofClock has created his own cab file (which I have now updated to ncruz newest versions) with all other files and reg settings ...
Attached to this post is are two RAR files containing a cab file and 2 dll files.
To install, follow these instructions :
1. Download Himalaya_WM5_MMS.part1.rar and Himalaya_WM5_MMS.part2.rar from this post.
2. Decompress the rar file on your PC using winrar or something similar
3. Soft reset your Himlaya
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on your Himalaya
5. Copy the cab file to your Himalaya and install it.
6. Soft-reset your device again
7. After this , go the messaging application. click on Inbox you should see a new account there called MMS.
If not click on Menu>Tools>New Account
Create a dummy email account (it doesn't matter what info you fill in, just make it up) but at the Account information select MMS as the account type and click next.
Then finish going through the account creation, again for the server information making anything up.
8. Once that is completed clock on Menu>MMS Configuration then click the servers tab.
9. From here fill in your operators server settings (remember to set it as default!) and enjoy MMS on WM5.0!!
Again thanks sooo much for everyone's hard work in getting this working, especially ncruz for the initial work and the BA cab and TofClock for making the Himalaya cab file.
Great, just another thing, thoose files aren't from universal.
First, thoose files are from MY POST, i've reshacked thoose files for qvga devices, so it really pisses me off when people take credits for things they don't to.
Second, at least use my latest rcdll.dll see my post at BA forum.
The one that's in THAT cab has some huge icons. and i have hacked it a little bit more.
Third, i've already resolved the problem of having to create the account by hand.
So, if you really want to do the thing right, get the cab at my post, open wincecab editor, remove rcdll.dll and arcmms.dll, install the cab, then copy the files you've just removed and copy them to \windows.
PS: you can check the original files from universal and see that they aren't the same.
everythin is done as explained before, and no mms account appears
please help me
THankssss
Working with WM2k5_1.60c.00WWE_XDA2_HIMALAYA
thanks mjames_84 for update the cab
GREAT THANKS to ncruz for your good job , without it , i never should made this cab
paketecuento -
Have you tried this previously using ncruz manual installation?
I had trouble with that method and once I tried it even after I used the cab file it wouldn't work I had to hard reset my device and do it again.
If you did try the manual install first then you may have to do the same, it certainly worked for me anyway.
As his cab file worked great once I had removed the two dll files and had done a hard reset.
Of course if you havn't tried the manual installation previously then it could be anything you might need to give more info on what ROM version you're using, software you have installed etc...
working 100%, once updated to 1.60c....
It's strange. On my device every time I try to install the cab file I get an error message while installing. I follow the instuctions as described...
Has anybody dealt with it?
Same problem here
Get a error when I start installing. Says that I should try a different location. I"ve tried my SD and PPC. Nothing works.
Download here
It's worked with my WM5V.1.60c!!!
But i use .dll files from mjames_84 and use .cab file from TofClock. I can send and recieve my MMS!!!
Thank you
I too tried mjames files and had problems.
However I also left mjames .dll files there deleted his cab file and used TofClocks' cab file and I now have working MMS.
Thanks all!
the dll in archive with my cab are same of mjames dll and ncruz dll , i've updated the rar
Hello, thank you for the great work!
But i have a problem, no way to getting it to send messages through Vodafone italy, i had already a Vodafone MMS connection setted up by my QTEK SD Configuration wizard (dloaded from dangaard site) which worked with WM 2003 but i have no way of getting it to work in WM 2005, i keep getting the error message that my mms has not been sent. Anyone can help me please?
Thank you very much
By the way, since i almost haven't any programming skill i have Eng/Ita translation skill ^_^, so if u are interested in translating the WM2005 ROM to ITA let me know, i can help ^_^
Hi overhere,
I did precies what you said at the top,
But when I want to start MMS I get an error about a bad cerificate or something like that... please help...
Klazimodo
It works !
Upgraded to wm 5.0 two days ago.
Installed as per instructions and my MMS's work like a charme.
Thanks guys 8)
Hi guys
I installed it, no problem with installation. Send mms, GPRS Monitor shows that the mms is sending but then I get a error that says unable to send.
What can the problem be?
Use WM5 1.60c and Radio 1.08
Thanks guys
dudes, Himalaya is ****ing full of those WMstuff, so will you people try to do something for ALPINE ?
Or XDA O2IIi ?
hi there
i am not able to install
i have xda2 win2005 1.60c
i downloaded both the rar files unrared these in two dif folders one is called part 1 and the other part2
then i softreset my xda
then i coppied dll files from part1 folder
then i try to install the cab file coopied from my pc to xda
i try to install on system
but message comes up says that MMS.... can not be install
am i doing something wrong here
and y there are two rar files containig the same files
PLZ help
Regards
its working now
thanx
regards
gugi
I have updated to 1.13 Big Storage, and now im missing a few tiny but helpful things.
before my jump to 1.13 i noticed my GPRS icon had a 'disconnect' button, now on 1.13BS it doesnt, so i find it hard to disconnect my GPRS connection, i dont like having it on all the time, only as and when.
Have i not installed something from the extended rom to fix this?
Also, how can i change the MMS/SMS/Email and Ringtones. I want to use mp3 tones for all, on the SPV C500 it was a reg hack that fixed this, is this the same?
Ive got a wav file as my ring tone at the minute, but its mahoosive!
Is there a loudspeak option on the phone? and is there a way to add voice dialing/typing?
Hi vini,
You're now experiencing plain WM2003 :-(
So go for the reg.hack for mp3 ringtone selection or put them manually in the rings folder.
GPRS disconnect is the same or you get the cab from the ori. ext-rom to get the disconnect button in the bubble or you use spb pocket tips&trucs to add it or push the red disconnect button for a few seconds.
So everything you mentioned isn't plain WM2003, but very handy indeed. Which means the providers are sometimes useful.
Cheers, M
red disconnect button? i dont get that
another bug/problem ive found, is im only getting 70 characters on Certain sms messages, i think. when i Reply this happens.
The red button to disconnect a phone call.
Seems like you are using unicode in your sms replies these double byte characters are using your precious sms space. You can turn them off, but don't rember how. It has been discussed many times before, so a search on unicode should help you.
Cheers, M
How to???
Hey ppl,
I downloaded the zip file from ftp site\magician\big storage ROMS\WWE 1.13.zip
Extracted it and found bs113.nbf file.. now how do i use it to upgrade my Poket PC? Ive gt no much knowledge in this bigstorage thngy and so can u help me.. Tanx a lottt in advance...
hey Carty, there is a tutorial which explains all (ive attached it)
that is all i followed and this thread.
ive worked out that my SMS allowance (usually 160 chars) is cut to 70 if i use a ' or any form of strange punctuation.
i was writing 'whats the weather like' and it automatically changed it to 'what's the weather like' i noticed id been cut to 70 chars, but deleted the
' in "what's" and i got my 160 char limit back, freaky! but how can we fix it? or is it just me?
BS without MMC reader!
hey vini,
I faced the same prob as u rite nw, tat msg ting.. u gotta change some settings in messages.. il telya my settings.. go to messaging,accounts and ul see a setting for text messaging.. click on tat and itl take u to a place wer yr opperator# will b ritn.. belo tat thers an option "use unicode wen necessacy" check tat on...
Now to mine, i read ampda' ting and found tat i need an mmc reader.. bt i don have it and heard somewer someone who told tat u cld do it wit usb itself if u already have a patched file... can yu help me pls...
For an update to rom 1.13BS go to the thread about upgrading to 1.13 and radio 1.13 in the magician upgrading etc. section. Find the post from hlt. He wrote a complete how to & posted the tools. A few posts later I added some minor comments on the how to. You will patch a shipped rom & upgrade via usb. No need for SD- or MMC-readers.
Regards, M
H oltp,
I chkd yr posted reply and uve mentioned abt getdevicedata.exe to b copied to device... wer frm i get tat application (getdevicedata.exe)?
and how to decode tat nk.nbf file?? help me pls.. as i sed, im new!
Dear Carty,
Hlt posted the tool nbfdec in that thread, hexedit can be found on the ftp xda:[email protected] in one of the magician sub-directory. The getdevicedata file is part of the shipped rom which you can download from the ftp at the magician\shipped roms subdir.
Does this help you?
Regards, M
Hi oltp,
tanx for yr qwik reply but the thing getdevicedata.exe is not working.. i extracted it from Tmobile' 1.13 rom and transfered it to my Poket pC and clicked on it.. no sign of it getting executed or error msg.. i chkd windows directory and text file not created.. wot to do buddy??
Re: BS without MMC reader!
Carty said:
hey vini,
I faced the same prob as u rite nw, tat msg ting.. u gotta change some settings in messages.. il telya my settings.. go to messaging,accounts and ul see a setting for text messaging.. click on tat and itl take u to a place wer yr opperator# will b ritn.. belo tat thers an option "use unicode wen necessacy" check tat on...
Click to expand...
Click to collapse
ive unticked "use Unicode when necessary" and it works fine.
Carty said:
Hi oltp,
tanx for yr qwik reply but the thing getdevicedata.exe is not working.. i extracted it from Tmobile' 1.13 rom and transfered it to my Poket pC and clicked on it.. no sign of it getting executed or error msg.. i chkd windows directory and text file not created.. wot to do buddy??
Click to expand...
Click to collapse
What about skipping it & using the maupgradeut_noid? My guess is that that stepnis meant to avoid the country id error. So is maupgradeut_noid. So download it fRom the ftp, put it in your dir. with the other extracted files from the shipped rom, execute it twice & you must be there.
Regards, M
FIne,
ive got
1.enterbl.exe
2.getdevicedata.exe
3.Rom upgradeUT.exe
4.ms_.nbf
5.nk.nbf
6.radio_.nbf
7.ruu.conf
8.ruu.dll
9.UI.dll
from the original shipped T-mobile' ROM
Got MaUpgrade.exe from ftp
got bs113.nb1 from big storage folder under ftp...
i have 'em all in one folder... i also added a line 'checkid type..' in ruu.conf to avoid country id error.. so now i directly run MaUpgrade file in bootloader mode or to delete any file from above.. i mean, the Bigstorage unpatched file from shipped ROM.. which file is it? and do i have to decode or do somethin to tat bs113.nb1 file? cz the original rom had files in nbf format..
Oltp, tanx for yr reply and help me wit tis nw.. im annoying you too much i gezz
Hold on, slow down a bit for this old man.
You're mixing things up. The bs113.nb1 is a complete romimage & cannot be used in a shipped rom upgrade.
To use that file you need a different procedure:
- dump your current rom on a sd-card
- get it on your pc
- copy the first 416 bytes from your dump into (overwrite) the bs113.nb1
- write the modified bs113.nb1 on your sd-card
- put in your magician
- press power
- wait till it finishes
- reset
- done
For the shipped rom you need to
- decode the nk.nbf to nb1 format with nbfdec
- open nk.nb1 in hexeditor
- search twice for the mentioned bit pattern & replace it with the usual BS pattern
- encode the modified nk.nb1 to nk.nbf again
- connect your magician with usb to pc (no need for bootloader mode)
- run maupgradeut_noid (this will check your device & puts it into bootloader with the enterbl file)
- follow instructions on pc screen
- keep an eye on your very dark magician screen
- wait till it finishes
- reset
- done
Cheers, M
Man i made it!!
Finally i made it.. All my thanx to whoever helped me..specially to oltp.. Im sorry oltp if ive annoyed u but i ws confused & im new too.. anyway, wot i did ws, patched the BS ting in the shipped ROM' nk.nbf file after decoding it.. I don understand 1 ting.. this is the easiest method of all BIgStorage' methods.. it doesnt require a mmc reader too.. Then y dn they jus place the patched nbf file in the original shipped rom and place it in BigStorage folder.. Cz every BS folder in ftp i see, there are some oter files wich i won understand.. Anyway tanx to oltp for helping me wit his replies sooon.. Finally I got BiggggG STorage
I belief herman3101 uploaded a modified nk.nbf, don't know the exact location. I just uploaded my rom to help someone here at the forum.
So everybody can choose his/her favorite method.
& I just like to patch myself, if something goes wrong I know who to blame.
Have fun with your new rom.
Cheers, M
Dear all,
yesterday I upgraded my Magician from the 1.11 Firmware Versions to the T-Mobile BigStorage GER 1.13 (changed my Radio stack from 1.11 to 1.13 also).
Everything is fine as expected, but the Arcsoft MMS 2.5.0.28 from the matching ExtROM 1.13.129 is not working properly. When I send a MMS to my device, it keeps on opening Pocket Outlook, but nothing happens. When I close POutlook, it is immediately opened again. I can configure the MMS server, but the MMS Folders (Inbox, sent...) as in previous version Arcsoft MMS 2.0.0.22 are now missing.
I installed only the following CABs from ExtROM in this order:
BTHUSB_PATCH_AKU26.CAB
CAB-Acrosoft-MMS-2.5.0.28-DEU-MagicianAKU2.6-13May05.CAB
CAB-TaoJava-10.1.2.76-PPC-DEU-17Aug05.CAB
Did I miss anything?
Kind regards
Mundl
again?
as we said at your last thread with the same question:
Arcsoft MMS 2.5.0.28 needs some data from the callerID-cab, without them it won't work,
install the cab or extract this files >>>>
iacontacts.dll
DisplayCID.dll
ContactsSDK.dll >>>> to your windows path
kr!
please trik me sending more extension file(*.doc *.zip *.rtf) in mms arcsoft???
I just purchased an AT&T branded HTC Tilt and quickly located this forums for my tweaking needs.
I re-flashed to an HTC ROM and noticed I no longer have the option to send audio/video via MMS. In searching this forum I located and installed Arcsoft's MMS V.4.2.8.1 ... however I still do not see the option to send audio/video via MMS.
I'm looking for any assistance to get the MMS feature installed and working on my device.
I'm a Blackberry-convert and Window Mobile is an uncharted territory for me. Please be gentle ...
Thank you
bump
Bump ... can anyone help me get my MMS feature installed and working once again.
Thank you in advance
Drop the attached cab to your device through active sync, then using the phones file explorer locate the cab file and tick on it.. this will start the install process.... this will restore your att settings for mms and internet...
shogunmark said:
Drop the attached cab to your device through active sync, then using the phones file explorer locate the cab file and tick on it.. this will start the install process.... this will restore your att settings for mms and internet...
Click to expand...
Click to collapse
shogunmark:
Thank you for the response
I've downloaded and installed the CAB file to my Tilt, however I'm still unable to see the MMS function.
Other tha installing the CAB file, is there any configuration that I ned to complete before I can use the MMS feature?
Thanks again for your help.
Hey guys... just released a new chome weather version that should work with the VOX also. Can somebody give it a shot ?
I can't seem to get it to install,
Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
I'm using version 3 of Zeeshee ROM.
Cheers,
Same for me! Same rom. Btw, both weather progs delete my clock icon and blackscreen is not possible to load. (mini with dr.gonzo 6.1 rom)
Everything works!
Extract from cab all files for Windows directory and place them into the device.
Delete this files from cab and save cab.
Modify cab working.
Works brilliant .. Thanks a lot keep it up ... i like the background on the pictures what you post there . it will be great if you send it as well . cheers
I'm being stupid here.
I still can't get it to work.
Can someone upload the modified cab please.
Thank you.
Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!
Excellent!
Thank you for posting.
Regards,
Anyone have a screen shot of what it looks like?
TabletGuru said:
Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!
Click to expand...
Click to collapse
Thank you it works perfect now.
Got it to work, sort of, so please help.
weather.yahoo.com gives me NLXX001 as code
Doesn't seem to do anything
(And so is c>f not working)
Are we still using weather.yahoo.com as source?
I had already installed the original MiniWeather on my on my vox (Orange E650) and all was OK except that in portrait mode the weather image didn't show on the clock tab whereas it did in portrait mode. So I decided to install the vox version to see if it would be fixed.
Unfortunately I've found that the files can't be copied over to the device's Windows folder because Resco says they already there as read-only files in ROM and therefore cannot be overwritten. So after installing the 1.0b CAB I get the following error when I initially select options:
Unknown command: "nu=timestamp"
Line 13(\program files\nrg\chomeminiweather\SetOptions.mscr):nu=TimeStamp()
Is there anything that can be done? Would the clock/weather Image have been fixed anyway? If not I'll revert to the previous version
Thanks and nice program !!!
can someoene post a home screen to show how this should look. Its messed up on mine i believe I get 2 panels - the first one works but the image is messed up. The second one says "forecast" but in there it just says "push centre button to update, push right softkey marked options to set your options"
I had trouble copying the two chome files to the windows directory - it said I didnt have permission to copy them.
can anyone assist ?
Frottage........ It sounds like you've had a similar problem to mine above.
If you can't copy the files over the install doesn't work properly.
I've reverted to the non-Vox version and all now seems OK on my Orange E650 with Dr.Gonzo's 5.2.19195 Rom
Try using the Resco Explorer trial to copy them across. It's because the files it's trying to replace are in ROM. Resco worked on my Dr. Gonzo E650.