Database Info

Magician Rom passwords

NK.nbf Passwrd: 0x20040521
ms_.nbf Passwrd: 0x20040522
Radio_.nbf Passwrd: 0x20040523
use xda3nbftool to convert the oprator and device type 8)
with best wishies....
laters :twisted:

We are all able to read wiki, those passwords are not working with imate rom! :evil:

How to use this?
Can show me the sample?

NightmarE said:
use xda3nbftool to convert the oprator and device type 8)
laters :twisted:
Click to expand...
Click to collapse
where can i find it ? i only has xda2nbftool!
regards.

Nick-II said:
We are all able to read wiki, those passwords are not working with imate rom! :evil:
Click to expand...
Click to collapse
no it works with xda3nbftool.exe ,
type:
xda3nbftool -x NK.nbf NK.nba 0x20040521
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x Radio_.nbf Radio_.nba 0x20040522
and u will encrypt those files the u may do the second steps (convert to other provider)......
its worked for me, after i encrypt the rom files to nba i opend it with WinHex and the header apper with Magician info like rom version and the provider :wink:
laters 8)

So can we make our extended ROM with the latest files by selecting the newest of all available extended ROM's and also add the CAB files of our desire and make the ultimate extended ROM for our Magicians????

Ok! I tried it with Rom editor? With xda3nbf tool it gives ..this is not normal header password not accepted contact your vendor… strange? After that I tried to change devicedata.txt to imate proprieties, make it red only and put in windows directory of my Compact. It starts working. Himaupdate says that my device will be updated, after compact goes to USB serial screen, and finally Himaupdate says that I have different device model and all stops! I write this just as my experience only. If passwords given in this site are correct, why I can not open Rom with editor to modify extended rom?

Hi,
I think the password is incorrect, because when I try to decrypt the roms (O2Asia) with the nbf tool, it has a warning message "WARNING: this does not look like a nbf header, possible you provided the wrong password".
Any one can give me the password? Thanks

[Philippines] Where can i buy crystal case for o2 XDA II?

Any guys here in Pinas know where to buy the crystal case or clear case here in metro manila? Not the hard case wich is the metal like but i need the crystal/clear case. Thanks!

Crystal Case
Still interested in crystal case? call or txt this number, nakita ko lang sa bidshot.com marami siyang accessories for Xda2...0917-5367955, binondo area.

try that number. he/she is selling really nice crystal cases for the xda2. the cases are sold for 1200, 1300 pag ipapa-fedex sayo.

Hi! If you can spare the time try visiting Digital Walker (or something like that) in Park Square I, Makati. The store would be along one of hallways leading to/ from Hotel Nikko/ Dusit Hotel. I'm not aware of their store hours, but given that they operate in the mall, they might be following mall operating hours. If I understand what you are looking for correctly, this would be one of your best bets (place to visit that stocks this item).
You could also try visiting Xsite Mobile in Megamall (Pasig). This would be in the basement level of SM Mega Mall Bldg. A (I think), I could be wrong. Might be in Bldg. B, either way you could try checking the store directory/ lay-out plan or asking a security guard.
Good luck!
Any chance you know of any store selling the O2 original folding keyboard for the Xda II?
Cheers!

building B megamall
I saw one yesterday in SM Megamall Building B, im quite not sure if it is 3rd or 4th floor....basta dun sa computer center ng SM.

yeah, same here, saw one at cyberzone megamall b.. it's at the fourth floor.. let's say you came from mega a, then entered cyberzone thru the place where they're selling cute kiddie interior design thingies.. basta it's the shop nearest to the edsa side..

Xda II Keyboard & Inquiry
Thanks for the information! By the way, this is something I posted recently but I've received no responses yet. Maybe you folks can point a way through.
"Please help! Being an avid user (I really enjoy the old system environment I was using), but not that much of a "techie". I've managed to create for myself an interesting problem/ concern. I followed a link here in xda-developers and I foolishly tried upgrading my system through the following: Himalaya_WM2003SE_Upgrade and HIMA_WM_2K3_EXTROM. I need to and want to restore back to my old system. Please help me!!!
Note: Not being a consumate techie, but a user, I may have overlooked a something below... But I desperately need to restore.
"I obtained (with many thanks to fychan) a memory image of an English version of WM2003 SE which is an earlier version than the recent Chinese release, but it is genuine English. I managed to create an installable NK.nbf file from this. Also, mamaich has provided the version 1.18 Radio upgrade included here. Many thanks to mamaich for that and also for some advice when I was building the OS nbf file. Also, mamaich has provided some CAB files for Extended ROM which I have also attached here separately.
Attached is an upgrade for Himalaya devices to WM2003 SE WWE, Radio 1.18. Unzip the attachment into a folder of your choice. The nbf files are configured for operator ID O2 and language ID WWE. If you need to change these, carry out all the steps below. If they are OK for you, go straight to step 5.
1. Extract the decrypted versions of the nbf files by entering the following commands at the command prompt:
Code:
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
2.
3. Modify the operator ID in the nbfs to the value you require by entering the following commands at the command prompt substituting <operator> with the required value:
Code:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba
4.
5. Update the crc values for each of the decrypted files by entering the following commands at the command prompt:
Code:
xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba
6.
7. Encrypt the files back into the nbf files by entering the following commands at the command prompt:
Code:
xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306
8.
9. Place your device in the cradle, ensuring that the cradle is plugged directly into a USB port on your PC and not to a hub and that the power supply is connected to the cradle. It is also a good idea to disable any screensavers.
10. Run HimaUpgradeUt.exe
11. Sit back and wait for the Congratulations screen to be displayed on your PC. Your device will still be displaying 'Upgrading radio stack, please wait', but as long as the PC says it is done, then its all OK.
Notes:
a. I have installed this upgrade on my XDA II without any problems, and have also been able to revert back to the 1.72 ROM I had installed previously. I have bootloader v1.01, and I don't know whether it would be any different for later versions of bootloader.
b. After upgrading, a hard reset takes places and the Extended ROM is installed. I found that several applications caused a 'Application may not display properly.....' message box to appear which required tapping to dismiss. Therefore, you will need to make sure that TPDisable.exe is not run in the Config.txt script in the Extended ROM, otherwise you will not be able to respond to the messages.
Edit: I've created a .BAT file which can be run from a DOS prompt to replace steps 1-4...
Usage: OperatorUpdate operatorID
where operatorID is O2 or CDL or TMOBILE, etc.
Just unzip the attached zip file.
________________________________________
OperatorUpdate.zip
Description: Update operator ID in .nbf files.
Download
Filename: OperatorUpdate.zip
Filesize: 528 Bytes
Downloaded: 4289 Time(s)
________________________________________
________________________________________
HIMA_WM_2K3_EXTROM.RAR
Description: Extended ROM CABs
Download
Filename: HIMA_WM_2K3_EXTROM.RAR
Filesize: 2.88 MB
Downloaded: 9422 Time(s)
________________________________________
________________________________________
Himalaya_WM2003SE_Upgrade.zip
Description: OS and Radio
Download
Filename: Himalaya_WM2003SE_Upgrade.zip
Filesize: 17.52 MB
Downloaded: 17787 Time(s)"
I hope you guys know how to restore the original system. =)
Cheers!

Treo Pro GSM HardSPL Final Test

IMPORTANT: I don't have time waiting on IRC sitting on my ass, I need to sleep. so this final package wasn't tested as I don't have this device myself, but I'm pretty sure it'll work alright. again sorry for the delay, I was busy in life (new place to live in, RhodiumW, making a living etc... not in order of importance ). this release could still be waiting if I wanted to wait for someone to do final release test but I'll just let you try it.
--below text is copied from my PPCGeeks thread--
OK right now I don't have time for the final tests (am still without a device) but I suppose it works. let me know if it does.
Update: it was tested at ppcgeeks and works.
Instructions:
first, if you have GSM treo pro (NOT CDMA, NOT SPRINT/VERIZON/TELUS), this is for your device. it is for PANT100.
steps:
0) if you have Vista or Windows 7, make sure you have latest WMDC.
1) download Hard-SPL package from attachment, extract to an empty local folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run PANTHER_GSM_HSPL exe from the folder
4) follow steps in the program!
5) it should go to tricolour screen now, i.e. SSPL mode, and show 0.59.C-SSPL. now follow steps in the RUU that's launched by now.
6) SPL flashes, device automatically reboots, job done. if you get any errors, follow the instructions offered by the program.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.59.CMONEX.
NOTE: you will not see the SPL version during normal boot!
to enter bootloader mode to see version: with the device turned on, press and hold the Camera button along with the Power button, then press the reset button with the stylus tip, then release the Camera and Power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically or problems with USB connection after SSPL was loaded, please copy SSPL-Manual-PantherGSM.exe from the SSPL-Manual-PantherGSM_V059.zip attachment to the device and run it (device must be plugged in to USB). then once the screen is in SSPL, run CustomRUU from Panther_CustomRUU.zip attachment manually and flash NBH file from PantGSM_HardSPL059.zip.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the HardSPL.
[SIZE=+2]finally, if you wish to thank me with a donation[/SIZE], you can do so by clicking the link the HardSPL program offers, or here: http://hpcmonex.net/htc/pantc/panther.htm

Troubleshooting tips:
- read the instructions
- read the instructions
- read the instructions
- if you have USB issues:
1. anyone having problems with the device entering SSPL automatically or problems with USB connection after SSPL was loaded, please copy SSPL-Manual-PantherGSM.exe from the SSPL-Manual-PantherGSM_V059.zip attachment to the device and run it (device must be plugged in to USB). then once the screen is in SSPL, run CustomRUU from Panther_CustomRUU.zip attachment manually and flash NBH file from PantGSM_HardSPL059.zip.
2. if it still has connection error in SSPL screen, try unplugging and replugging the USB
3. try different USB port, PC, etc.
4. when there are sync issues, the program also suggests installing this file on the phone: http://hpcmonex.net/roms/enablerapinew.cab, just making a note here too.
steps for stock SPL restore:
--posted soon-- (edit: mmm reminder to myself, this one has full overwrite prot.)

THIS IS AWESOME!!!
...I don't have time to test it yet, though. In the morning, for sure! Can someone get this working and make instructions for WM 6.5?
The Treo Pro just got a new breath of life!!
Thanks cmonex! I'll be donating to you in the morning!

Thanks for this, I've been long waiting for this, and I hope someone will make 6.5 GSM ROM soon

Downloading it now, i really hope I will not f*ck up my phone, i will post feedback in soon Someone better start making WM6.5 for it !!!! soon as well

OK when you tested it out... make sure to not flash CDMA roms, because that won't boot and you'll have to reflash to GSM rom

it keep giving me ERROR 260, Connection error, will it work if i try to flash it form memory card ?

vladimir2989 said:
it keep giving me ERROR 260, Connection error, will it work if i try to flash it form memory card ?
Click to expand...
Click to collapse
SD was untested so I dont recommend that...
is the device in 0.59-SSPL screen?

ok, i just did the whole process it said Congratulations but when i went to bootloader to check it says SPL.59.C-SSPL

Correction: IT WORKED !!!
i had to enter bootloader by pressing and hold the Camera button and the Power button, then reset button (b4 i just entered it through utility)
im happy
now who is making WM6.5 here ?

vladimir2989 said:
Correction: IT WORKED !!!
i had to enter bootloader by pressing and hold the Camera button and the Power button, then reset button (b4 i just entered it through utility)
im happy
now who is making WM6.5 here ?
Click to expand...
Click to collapse
I dont own a Treo Pro. However, if someone can provide a raw dump of a GSM Treo Pro, I'll build a rom kitchen and post it here.

if u give me, step-by-step guide how to get RAW dump i'll do it... and where can i download all the tools ...

Download ItsUtils from here, and extract the zip.
http://nah6.com/itsme/itsutilsbin-20090515.zip
Connect your Treo Pro using ActiveSync or WMDC
Run these commands. The first time you run them, you will have to allow a dll to run on your device. Just follow the on screen prompts.
pdocread.exe -w -d FLASHDR -b 0x800 -p Part00 0 0x31f000 Part00.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part01 0 0x3c0000 Part01.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part02 0 0x4d40000 Part02.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part03 0 0x6980000 Part03.raw

NightRaven said:
Download ItsUtils from here, and extract the zip.
http://nah6.com/itsme/itsutilsbin-20090515.zip
Connect your Treo Pro using ActiveSync or WMDC
Run these commands. The first time you run them, you will have to allow a dll to run on your device. Just follow the on screen prompts.
pdocread.exe -w -d FLASHDR -b 0x800 -p Part00 0 0x31f000 Part00.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part01 0 0x3c0000 Part01.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part02 0 0x4d40000 Part02.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part03 0 0x6980000 Part03.raw
Click to expand...
Click to collapse
download site posted is not working

http://uploading.com/files/b3346f99/Part00.raw/ - Part00.raw
http://uploading.com/files/1mf8m9f2/Part01.raw/ - Part01.raw
uploading the rest now....

http://uploading.com/files/16ema238/Part02.raw/ - Part02.raw

They are downloading now.

I'll be glad to help out with this too, when I get home from work. Can we use the existing ROMS available, or are those specifically for CDMA?

jasphair said:
I'll be glad to help out with this too, when I get home from work. Can we use the existing ROMS available, or are those specifically for CDMA?
Click to expand...
Click to collapse
Those are specifically for CDMA.

http://uploading.com/files/2a6fab9d/Part03.raw/ - Part03.raw
is that all u need NightRaven ?

[Q] ADD ROM version 1.72 and above HTC DHD ROM downgrade tutorial

The following one i have seen one of the Chinese forum. Is it can possible to root 2.37. I need a help from expert. THanx.
PS: Citie copyright Andrews forum all milk @ coffee produced reproduced thank you, please indicate the source
Note: This downgrade tutorial is only suitable for DHD in SHIP S-ON or ENG S-OFF under the wrong brush 1.72 above the official RUU version of the software, from ENG S-OFF back SHIP S-ON and can not by Visionary + software get ROOT highest authority use, other circumstances do not try!
Preparation:
1, download and install the HTC Sync Download: http://www.htc.com/cn/SupportViewNews.aspx?dl_id=982&news_id=776
2, download adb-tool.zip
Visitors, if you want to see the hidden content please post replies
Will extract from the adb-tool folder to the C root directory, then copy the adb-tool folder three files into the "My Computer "----" C drive "---- "Windows "----" System32" directory.
3, download Downgrade.zip
Visitors, if you want to see the hidden content please post replies
Will extract from the five files to the C drive just copied into the adb-tool folder
4, corresponding to your mobile phone to download the official region Brush Pack (RUU beginning of the EXE file, version 1.32 and below, there are 1.31 to 1.31 recommended)
1) See CID: DHD in "Settings "----" "----" application development "----" USB debugging" tick, and then DHD computer with data cable to connect, connection options "charging only", open the computer's "Start "----" Run", type "cmd", the pop-up window, enter "adb shell getprop ro.cid", then Enter
Appears similar to the "HTC_621" code words HTC_621 behalf of the Taiwan version HTC_622 DHD DHD is representative of the Hong Kong version (and so on ... specific code can be Baidu, if you can not find customer service customer service consulting HTC official website: http:// www.htc.com / CN / Support / online_service.html )
2) find the DHD and the corresponding area of your official Brush Pack, and version 1.32 and paste the following official RUU Collection Address: http://www.anzhuo.cn/thread-15122-1-1.html more official RUU Collection stickers Address: http://xdafil.es/index.php?sort=date&path=DesireHD/RUU/
The Hong Kong version, for example: RUU_Ace_HKCSL_CHT_1.32.832.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155943_signed.exe
RUU: HTC Update Utility abbreviation official upgrade tool
Ace: DHD's internal development code
HKCSL: HK on behalf of Hong Kong, CSL is the largest one mobile network operators, like China Mobile (HTCCN: CN on behalf of China)
CHT: language is Traditional Chinese, Simplified Chinese corresponds to CHS, US behalf of the U.S. (CHS for Simplified Chinese, WWE on behalf of the world's Edition)
1.32.832.6: software version number
12.28b.60.140e_26.03.02.26_M: radio version number
Release: release means here that the final version, along with the corresponding test, a test version of the meaning of
155 943: the version number part of the Signed: Signed through
5, the download is complete run the official Brush Pack, wait until you can brush machine interface operation, do not click Next, and then the computer
To Win7, for example: C: \ Users \ Administrator \ AppData \ Local \ Temp (If you do not find the corresponding folder, click Show hidden folder, if found
To xp, for example: C: \ Documents and Settings \ Administrator \ Local Settings \ Temp rom.zip, please use the search function in the computer's Temp directory search)
Directory, there is similar to {BC47B5B7-0CDF-4C97-9A2A-5C6C8E36186A} folder, inside there's a certain rom.zip archive, this archive copy out and rename it PD98IMG.zip, and then into the DHD mobile phone memory card root directory
Started:
1, DHD in "Settings "----" "----" application development "----" USB debugging" tick, and then DHD computer with data cable to connect, connection options "only charge "
2, open the computer's "Start "----" Run", type "cmd", the pop-up window, enter "cd \", Enter, then type "cd \ adb-tool", then Enter
Then another input (note the space):
1) "adb push psneuter / data / local / tmp", carriage return (the psneuter files to the phone / data / local / tmp directory)
2) "adb push misc_version / data / local / tmp", carriage return (the misc_version files to the phone / data / local / tmp directory)
3) "adb shell chmod 777 / data / local / tmp / psneuter", enter (modify file attributes psneuter 777)
4) "adb shell chmod 777 / data / local / tmp / misc_version", enter (modify file attributes misc_version 777)
5) "adb shell / data / local / tmp / psneuter", carriage return (Executive psneuter file)
6) "adb shell", carriage return (return adb shell)
Completion of 6), you should see the command prompt window "#" symbol, if not, check whether the correct implementation of the above steps if there is "#" symbol
Then enter:
7) "/ data / local / tmp / misc_version-s 1.31.405.3", carriage return (the role of this step is to make your system from that under the current software version is 1.31.405.3, automatic upgrades for the back to prepare)
8) "exit", Enter
9) "adb reboot bootloader", Enter
At this point the phone will automatically restart, and then automatically detect the presence of PD98IMG.zip, then automatically upgrade is complete, you will downgrade your phone to find that your own version of the official RUU
Downgrade to this end, you have complete the downgrade, so now you can re-post in accordance with Brush tutorial from scratch http://www.anzhuo.cn/thread-21957-1-1.html
Finally, I wish you success Brush

cool thanks for your tutorial.
Sent from my Desire HD using XDA Premium App

Coooooll, thanks sooo much

My phone's software is 2.37.707. Can i downgrade to 1.32 by this way? In hboot is ship s-on...

People, this is not a tutorial, it is a question. The guy does not know, he asks. This tutorial cannot downgrade anything above 1.7, unlike the existing guide in XDA. Mod, please remove this thread from the dev section.
That guide does not even have source pointing to the right place.. Makes my blood boil.
Sent from my Desire HD using Tapatalk

If it is a question then it is in the wrong section and it might be deleted.
Anyhow, untill it is not deleted, you can look in these posts:
http://forum.xda-developers.com/showthread.php?t=905003
http://forum.xda-developers.com/showthread.php?t=857537
I've used these posts for the first time, got root, but not full root. Had downgraded the radio, but when i wanted to upgrade the radio it told me that i hadn't root, and got serious problems connecting to pc. so I've installed an offical RUU and use ATM TOOL
---- ATM TOOL -----
Simply use this tool. This is the best tool, as it querys the phone if it can or not be downgraded/rooted/unlocked:
http://forum.xda-developers.com/showthread.php?t=1037315
That is what i have used. Now i don't remember if i had radio 2.37
But you will have to downgrade it anyhow.

Check this out:
http://forum.xda-developers.com/showthread.php?t=905003

Photon Q MSL Tool "fix"

I tried to post this as a reply to the actual thread that it had to do with but I am apparently not cool enough yet to post in developer forums. Hence, this thread.
A lot of people have been having problems with the tool returning %1 %3 %5 %7 %9 %12 instead of the MSL. Some people have said something about adb not being recognized and correctly assuming that it has something to do with the path. This tool calls on two commands- adb and findstr. Adb is located wherever you've put it and findstr.exe is in c:\windows\system32
I suggest putting adb.exe in c:\windows\system32 as well
Basically the locations of both these commands need to be included in the path statement if you want them to be able to work from any location, which we do. So, if you're having this %1 %3... etc problem, open up a command prompt wherever you have the photonq-msl.bat at. If you've put adb in the C:\windows\system32 directory/folder then at the command prompt, type
"path = c:\;c:\windows\system32"
then type "photonq-msl" to run the batch file.
Why the c:\windows\system32 directory isn't in the path statement already is beyond me, but it's not and that's the problem. Do this and it should work. If it doesn't, try opening a command prompt, typing the path = c:\;c:\windows\system32 thing then follow the normal directions on the phone (dial #DATA, first menu option, 3 dots in corner, edit, then verify. Once you press the verify button, type
adb logcat -b radio -d | findstr /C:"grde"
and you will get a number back.
If your number is 123456789123 take the 2nd, 4th, 6th, 8th, 10th & 12th numbers and you have your MSL. In this case:
MSL = 246813
I THINK that this error is caused by there needing to be a "^" right before the "|" due to the command already being nested inside quotes inside a FOR statement. So that line in the batch file should read:
FOR /F "tokens=17" %%G IN ("adb logcat - b radio -d ^| findstr /C:"grde"") DO SET EXTRACTED=%%G
but I haven't actually tested that, yet.