Database Info

Magician Rom passwords

NK.nbf Passwrd: 0x20040521
ms_.nbf Passwrd: 0x20040522
Radio_.nbf Passwrd: 0x20040523
use xda3nbftool to convert the oprator and device type 8)
with best wishies....
laters :twisted:

We are all able to read wiki, those passwords are not working with imate rom! :evil:

How to use this?
Can show me the sample?

NightmarE said:
use xda3nbftool to convert the oprator and device type 8)
laters :twisted:
Click to expand...
Click to collapse
where can i find it ? i only has xda2nbftool!
regards.

Nick-II said:
We are all able to read wiki, those passwords are not working with imate rom! :evil:
Click to expand...
Click to collapse
no it works with xda3nbftool.exe ,
type:
xda3nbftool -x NK.nbf NK.nba 0x20040521
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x Radio_.nbf Radio_.nba 0x20040522
and u will encrypt those files the u may do the second steps (convert to other provider)......
its worked for me, after i encrypt the rom files to nba i opend it with WinHex and the header apper with Magician info like rom version and the provider :wink:
laters 8)

So can we make our extended ROM with the latest files by selecting the newest of all available extended ROM's and also add the CAB files of our desire and make the ultimate extended ROM for our Magicians????

Ok! I tried it with Rom editor? With xda3nbf tool it gives ..this is not normal header password not accepted contact your vendor… strange? After that I tried to change devicedata.txt to imate proprieties, make it red only and put in windows directory of my Compact. It starts working. Himaupdate says that my device will be updated, after compact goes to USB serial screen, and finally Himaupdate says that I have different device model and all stops! I write this just as my experience only. If passwords given in this site are correct, why I can not open Rom with editor to modify extended rom?

Hi,
I think the password is incorrect, because when I try to decrypt the roms (O2Asia) with the nbf tool, it has a warning message "WARNING: this does not look like a nbf header, possible you provided the wrong password".
Any one can give me the password? Thanks

WM2005 install now XDA doesn't work

Hi
I installed wm2005 1.60c wwe and now my xda doesn't work. I have no phone, no calendar or contacts. camera & recorder buttons don't work and no gprs connection. I get an error saying cprog.exe isn't working.
Not sure what went wrong. Didn't fully understand the instructions being a brave newbie I went ahead regardless. Also didn't backup! (duh)
These are the instructions I followed
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
6. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
7. Run HimaUpgradeUt.exe
8. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
9. Detach your device from the cradle.
10. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
At the end when I pressed the dpad nothing happened so I did a soft reset instead. Also at the beginning of the instructions it said this
Extract the decrypted versions of the nbf files
by entering the following commands at the command prompt:
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
2. Modify the operator ID in the nbfs to the value you require
by entering the following commands at the command prompt
substituting <operator> with the required value:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba
3. Update the crc values for each of the decrypted files
by entering the following commands at the command prompt:
xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba
4. Encrypt the files back into the nbf files by entering
the following commands at the command prompt:
xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306
which I didn't understand about the command prompt and ignored so thats probably why I have the problem. Can anyone help me with this?????

1.60?
why not try aku2 and abv
try getting tofclock 2.01 rom which i think is still the most stable rom and flash again

Ignoring the command prompt stuff is fine and won't have messed up your device, it is simply to get the ROM to be in a language other than english, if you have trouble with putting an english ROM on your device (for instance if you own an Arabian handset you will have to do this part)
Did you format storage and wipe the registry? Did you get through the whole flash process properly? The instructions should have worked, but you should have been able to press DPAD after the wipe (dpad is the direction pad for up-down, left-right movement).

Hi!
I've been having the same problem - along with the device no longer sync'ing with my pc. How do I wipe the storage and delete the registry entries?
Thanks,
Xale

R-cook the rom, and follow the instruction until the last step carefully

Thanks for your help - could you be a little more specific? or link to where i can get r-cook and these instructions?
thanks,
Xale

xale said:
Thanks for your help - could you be a little more specific? or link to where i can get r-cook and these instructions?
thanks,
Xale
Click to expand...
Click to collapse
Download c_shekhar rom, and cook the rom to try. There is instruction inside or in the first page..
http://forum.xda-developers.com/showthread.php?t=287941

Orange Uk Rom 1.14.61.2 ready For Download

hi all my reconstructed orange uk rom is now ready for download.
1. you need to run uspl and then install uspl for help check out (http://forum.xda-developers.com/showthread.php?t=330909)
2. then when phone has started you can run flash.exe in the rom folder.
3. once the phone has rebooted and you have your new orange uk rom run flash inside splashscreen folder for the orange splash.
for some reason i couldnt get it to work with all items together so we have to do three steps.
Warning: I have tested this by flashing to my own e650 but you do flash at your own risk.
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
No radios are included but they are available on the ftp as my rom will be hopefully.
ftp://ftp.xda-developers.com/Uploads/Smartphone/Vox/Radios/
Thanks to Dr Gonzo for his kitchen and help and Jockyw2001 for his excellent uspl

hoyler30589 said:
hi all my reconstructed orange uk rom is now ready for download.
1. you need to run uspl and then install uspl for help check out (http://forum.xda-developers.com/showthread.php?t=330909)
2. then when phone has started you can run flash.exe in the rom folder.
3. once the phone has rebooted and you have your new orange uk rom run flash inside splashscreen folder for the orange splash.
for some reason i couldnt get it to work with all items together so we have to do three steps.
Warning: I have tested this by flashing to my own e650 but you do flash at your own risk.
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
No radios are included but they are available on the ftp as my rom will be hopefully.
ftp://ftp.xda-developers.com/Uploads/Smartphone/Vox/Radios/
Thanks to Dr Gonzo for his kitchen and help and Jockyw2001 for his excellent uspl
Click to expand...
Click to collapse
post some screenshots.

Great job, it works!
But the first "picture" is HTC is it normal?

what is additional in this rom than wm 6.1?

lerameur said:
Great job, it works!
But the first "picture" is HTC is it normal?
Click to expand...
Click to collapse
yeh the first picture is htc you need to run flash.exe inside the splash folder then you will get an orange one.

zeeshee said:
what is additional in this rom than wm 6.1?
Click to expand...
Click to collapse
this is the original orange rom for those of us that need it to send fone back for warranty.

hoyler30589 said:
this is the original orange rom for those of us that need it to send fone back for warranty.
Click to expand...
Click to collapse
Do you think you can do it with this rom?
ftp://xda:[email protected]/Uploads/Smartphone/Vox/ROMs/E650_ROM_version_1.22.70.3.zip
It's the french version and it's 1.22...

lerameur said:
Do you think you can do it with this rom?
ftp://xda:[email protected]/Uploads/Smartphone/Vox/ROMs/E650_ROM_version_1.22.70.3.zip
It's the french version and it's 1.22...
Click to expand...
Click to collapse
ill have a go, will let you know later on today

lerameur said:
Do you think you can do it with this rom?
ftp://xda:[email protected]/Uploads/Smartphone/Vox/ROMs/E650_ROM_version_1.22.70.3.zip
It's the french version and it's 1.22...
Click to expand...
Click to collapse
thats not the french rom ive reconstructed it and its romanian. if you know someone who has a working french version if you dump the rom i can reconstruct it for you, im in uk so i dont have any chance of finding anyone.
ive managed to add french language to the rom though, if you need it let me know and ill upload it for you.

I've succeed to put the rom in french but i don't know if the version of french rom is the same of uk one...
Here is the french dump orange, 3 raw files...
Can you see if it is possible to reconstruct it?
http://rapidshare.com/files/104498313/part00.rar.html
Sorry if my english is bad...
[EDIT] I'm about to find some information i will tell you when i'll know more [/EDIT]

lerameur said:
I've succeed to put the rom in french but i don't know if the version of french rom is the same of uk one...
Here is the french dump orange, 3 raw files...
Can you see if it is possible to reconstruct it?
http://rapidshare.com/files/104498313/part00.rar.html
Sorry if my english is bad...
[EDIT] I'm about to find some information i will tell you when i'll know more [/EDIT]
Click to expand...
Click to collapse
ill have a go and post bk tonight. your english is fine.

hoyler30589 said:
if you know someone who has a working french version if you dump the rom i can reconstruct it for you, im in uk so i dont have any chance of finding anyone.
Click to expand...
Click to collapse
Could you reconstruct polish rom? If yes, what do I have to do?

mmokrzycki said:
Could you reconstruct polish rom? If yes, what do I have to do?
Click to expand...
Click to collapse
yeh sure i can try for you, you just need to dump the three parts of the rom for me and then upload them to somewhere like rapidshare.
download the file located at:
http://nah6.com/~itsme/itsutilsbin-20080313.zip
extract to c:\rom
then start - run - cmd
type
cd..
then press enter
cd..
then press enter
cd rom
then press enter
"Below are the steps required to dump the ROM. Take care to check that the partition sizes match your phone."
type:
pdocread.exe -l
then press enter
youll then get something like the following:
58.82M (0x3ad1000) DSK1:
| 2.09M (0x217400) Part00
| 3.32M (0x352800) Part01
| 53.40M (0x3567000) Part02
making sure the 0x3567000 is the number for ypur part as these nums are different on every rom.
type: (this can take a short while)
pdocread -w -d DSK1: -p Part02 0 0x3567000 Part02.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x3567000, Part02.raw)
then type: (these will be quite quick)
pdocread -w -d DSK1: -p Part01 0 0x352800 Part01.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x352800, Part01.raw)
then type:
pdocread -w -d DSK1: -p Part00 0 0x217400 Part00.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x217400, Part00.raw)
when the above has finished zip or rar the raw files from c:\rom and then upload the rar to rapidshare and send me link.

hoyler30589 said:
hi all my reconstructed orange uk rom is now ready for download.
1. you need to run uspl and then install uspl for help check out (http://forum.xda-developers.com/showthread.php?t=330909)
2. then when phone has started you can run flash.exe in the rom folder.
3. once the phone has rebooted and you have your new orange uk rom run flash inside splashscreen folder for the orange splash.
for some reason i couldnt get it to work with all items together so we have to do three steps.
Warning: I have tested this by flashing to my own e650 but you do flash at your own risk.
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
No radios are included but they are available on the ftp as my rom will be hopefully.
ftp://ftp.xda-developers.com/Uploads/Smartphone/Vox/Radios/
Thanks to Dr Gonzo for his kitchen and help and Jockyw2001 for his excellent uspl
Click to expand...
Click to collapse
Is it not possible to have this Orange HomeScreen like in the Polish and Romanian ROM's
http://forum.xda-developers.com/attachment.php?attachmentid=79277&d=1207263252
Roland

Rolandh said:
Is it not possible to have this Orange HomeScreen like in the Polish and Romanian ROM's
http://forum.xda-developers.com/attachment.php?attachmentid=79277&d=1207263252
Roland
Click to expand...
Click to collapse
we need a uk rom of 1.22 i only have old rom, i was going to try and extract orange pluggin but its against rules. if you know anyone with a uk e650 on the new orange rom dump files and send me them and i can then reconstruct it.

link to ftp for radio files says permission denied.
How can I get them or can you put them on rapidshre perhaps ?
I have got the rom from rapidshare ok.
I am plannin on trying the wm 6.1 rom update but want to be able to put the original orange ram back on if I don't like it or want to sell the phone later.
What exactly is the radio part for. bluetooth/wifi ?
Will I not be able to use that if I put the rom on without it ?

hi ill try looking for radio links but if u try win mobile 6.1 rom that doesnt change your radio so therefore you are ok,
the radio controls phone signal bluetooth and wifi.
before you flash check what version of orange rom you got cos theres some people with a newer rom.
to check press start and then settings and then more and about and then look at the operator number and if its 1.22 will you msg me as thats newer and i need the newer rom.
hope that helps
rich

hoyler30589 said:
hi ill try looking for radio links but if u try win mobile 6.1 rom that doesnt change your radio so therefore you are ok,
the radio controls phone signal bluetooth and wifi.
before you flash check what version of orange rom you got cos theres some people with a newer rom.
to check press start and then settings and then more and about and then look at the operator number and if its 1.22 will you msg me as thats newer and i need the newer rom.
hope that helps
rich
Click to expand...
Click to collapse
Might be in luck.
Rom version 1.22.61.3
Operator version 22.122.1.613
Actually not sure know if that means rom is 1.613 because you said operator number.
Rom version is listed above that though and is as above. 1.22.61.3
Is that what your after ?
In any case I have no idea about how to backup up the rom to send to you or my radio parts to enable me to put it back if needed after trying 6.1

Hi Hoyler,
My S710 are in warranty and i need revert to my original ROM.
My model is S711 (vresion S710 brazilian).
I have the dump files in my machine.
You can convert the RAW filles in NBH file for me?
Thanks,
hoyler30589 said:
yeh sure i can try for you, you just need to dump the three parts of the rom for me and then upload them to somewhere like rapidshare.
download the file located at:
http://nah6.com/~itsme/itsutilsbin-20080313.zip
extract to c:\rom
then start - run - cmd
type
cd..
then press enter
cd..
then press enter
cd rom
then press enter
"Below are the steps required to dump the ROM. Take care to check that the partition sizes match your phone."
type:
pdocread.exe -l
then press enter
youll then get something like the following:
58.82M (0x3ad1000) DSK1:
| 2.09M (0x217400) Part00
| 3.32M (0x352800) Part01
| 53.40M (0x3567000) Part02
making sure the 0x3567000 is the number for ypur part as these nums are different on every rom.
type: (this can take a short while)
pdocread -w -d DSK1: -p Part02 0 0x3567000 Part02.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x3567000, Part02.raw)
then type: (these will be quite quick)
pdocread -w -d DSK1: -p Part01 0 0x352800 Part01.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x352800, Part01.raw)
then type:
pdocread -w -d DSK1: -p Part00 0 0x217400 Part00.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x217400, Part00.raw)
when the above has finished zip or rar the raw files from c:\rom and then upload the rar to rapidshare and send me link.
Click to expand...
Click to collapse

hoyler30589 said:
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
Click to expand...
Click to collapse
Could anybody upload this file on any other file hosting? For examle on mediafire.com, badongo.com etc....
I can't download files from Rapidshare and Megaupload because of my internet connection
Thanks in advance.

Dumping the pharos rom: help needed...

I tried to dump my pharos rom for a guy who needs it: http://forum.xda-developers.com/showthread.php?t=417330
While editing the registry HKLM\Security\Policies\Policies valuename '00001001' I changed it to dword:1
So far no problems
In the next step I tried to check that all the partition sizes reported by pdocread were correct. Here I got the first error message (see screenshot).
I tried to skip the verification of the partition sizes reported by pdocread and tried to go on with the reported partition sizes. But here it's the same error message again and I can't go on with further steps (see screenshot).
My pharos is not modified in any way, has no sim lock and the original shipped rom. No HardSPL so far.

in the command line you need to change "FLASHDR" with "DSK1:"
this is the right command:
pdocread -w -d DSK1: -p Part00 0 0x313400 Part00.raw
remember that the the os is Part02.raw
bye

Copy the files included in this zip to your tools directory and use this bat file to dump the firmware. You will get the SYS and OEM folders on the dump directory. It only dumps part02.
I'm trying to do a automated dumper like elf's one, but it isn't finished.

Files missing..
Thanks to both of you for your help.
@jose_sonseca: Your tool is absolutly fantastic ****many thanks****
But I still need two files, one is something like ...prepare_imgfs...
Where can I find them...?

You need itsutils (if you have pdocread, it's ok), and imgfs tools -> http://forum.xda-developers.com/showthread.php?t=249836 Download imgfs_tools_182.zip
They include prepare_imgfs and viewimgfs. DMP2PKG tool is included in my zip file.

jose_sonseca said:
You need itsutils (if you have pdocread, it's ok), and imgfs tools -> http://forum.xda-developers.com/showthread.php?t=249836 Download imgfs_tools_182.zip
They include prepare_imgfs and viewimgfs. DMP2PKG tool is included in my zip file.
Click to expand...
Click to collapse
Thank you - Great

Very nice job!!!
I search this to my Touch PRO
Thx a lot!!

[Q] ADD ROM version 1.72 and above HTC DHD ROM downgrade tutorial

The following one i have seen one of the Chinese forum. Is it can possible to root 2.37. I need a help from expert. THanx.
PS: Citie copyright Andrews forum all milk @ coffee produced reproduced thank you, please indicate the source
Note: This downgrade tutorial is only suitable for DHD in SHIP S-ON or ENG S-OFF under the wrong brush 1.72 above the official RUU version of the software, from ENG S-OFF back SHIP S-ON and can not by Visionary + software get ROOT highest authority use, other circumstances do not try!
Preparation:
1, download and install the HTC Sync Download: http://www.htc.com/cn/SupportViewNews.aspx?dl_id=982&news_id=776
2, download adb-tool.zip
Visitors, if you want to see the hidden content please post replies
Will extract from the adb-tool folder to the C root directory, then copy the adb-tool folder three files into the "My Computer "----" C drive "---- "Windows "----" System32" directory.
3, download Downgrade.zip
Visitors, if you want to see the hidden content please post replies
Will extract from the five files to the C drive just copied into the adb-tool folder
4, corresponding to your mobile phone to download the official region Brush Pack (RUU beginning of the EXE file, version 1.32 and below, there are 1.31 to 1.31 recommended)
1) See CID: DHD in "Settings "----" "----" application development "----" USB debugging" tick, and then DHD computer with data cable to connect, connection options "charging only", open the computer's "Start "----" Run", type "cmd", the pop-up window, enter "adb shell getprop ro.cid", then Enter
Appears similar to the "HTC_621" code words HTC_621 behalf of the Taiwan version HTC_622 DHD DHD is representative of the Hong Kong version (and so on ... specific code can be Baidu, if you can not find customer service customer service consulting HTC official website: http:// www.htc.com / CN / Support / online_service.html )
2) find the DHD and the corresponding area of your official Brush Pack, and version 1.32 and paste the following official RUU Collection Address: http://www.anzhuo.cn/thread-15122-1-1.html more official RUU Collection stickers Address: http://xdafil.es/index.php?sort=date&path=DesireHD/RUU/
The Hong Kong version, for example: RUU_Ace_HKCSL_CHT_1.32.832.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155943_signed.exe
RUU: HTC Update Utility abbreviation official upgrade tool
Ace: DHD's internal development code
HKCSL: HK on behalf of Hong Kong, CSL is the largest one mobile network operators, like China Mobile (HTCCN: CN on behalf of China)
CHT: language is Traditional Chinese, Simplified Chinese corresponds to CHS, US behalf of the U.S. (CHS for Simplified Chinese, WWE on behalf of the world's Edition)
1.32.832.6: software version number
12.28b.60.140e_26.03.02.26_M: radio version number
Release: release means here that the final version, along with the corresponding test, a test version of the meaning of
155 943: the version number part of the Signed: Signed through
5, the download is complete run the official Brush Pack, wait until you can brush machine interface operation, do not click Next, and then the computer
To Win7, for example: C: \ Users \ Administrator \ AppData \ Local \ Temp (If you do not find the corresponding folder, click Show hidden folder, if found
To xp, for example: C: \ Documents and Settings \ Administrator \ Local Settings \ Temp rom.zip, please use the search function in the computer's Temp directory search)
Directory, there is similar to {BC47B5B7-0CDF-4C97-9A2A-5C6C8E36186A} folder, inside there's a certain rom.zip archive, this archive copy out and rename it PD98IMG.zip, and then into the DHD mobile phone memory card root directory
Started:
1, DHD in "Settings "----" "----" application development "----" USB debugging" tick, and then DHD computer with data cable to connect, connection options "only charge "
2, open the computer's "Start "----" Run", type "cmd", the pop-up window, enter "cd \", Enter, then type "cd \ adb-tool", then Enter
Then another input (note the space):
1) "adb push psneuter / data / local / tmp", carriage return (the psneuter files to the phone / data / local / tmp directory)
2) "adb push misc_version / data / local / tmp", carriage return (the misc_version files to the phone / data / local / tmp directory)
3) "adb shell chmod 777 / data / local / tmp / psneuter", enter (modify file attributes psneuter 777)
4) "adb shell chmod 777 / data / local / tmp / misc_version", enter (modify file attributes misc_version 777)
5) "adb shell / data / local / tmp / psneuter", carriage return (Executive psneuter file)
6) "adb shell", carriage return (return adb shell)
Completion of 6), you should see the command prompt window "#" symbol, if not, check whether the correct implementation of the above steps if there is "#" symbol
Then enter:
7) "/ data / local / tmp / misc_version-s 1.31.405.3", carriage return (the role of this step is to make your system from that under the current software version is 1.31.405.3, automatic upgrades for the back to prepare)
8) "exit", Enter
9) "adb reboot bootloader", Enter
At this point the phone will automatically restart, and then automatically detect the presence of PD98IMG.zip, then automatically upgrade is complete, you will downgrade your phone to find that your own version of the official RUU
Downgrade to this end, you have complete the downgrade, so now you can re-post in accordance with Brush tutorial from scratch http://www.anzhuo.cn/thread-21957-1-1.html
Finally, I wish you success Brush

cool thanks for your tutorial.
Sent from my Desire HD using XDA Premium App

Coooooll, thanks sooo much

My phone's software is 2.37.707. Can i downgrade to 1.32 by this way? In hboot is ship s-on...

People, this is not a tutorial, it is a question. The guy does not know, he asks. This tutorial cannot downgrade anything above 1.7, unlike the existing guide in XDA. Mod, please remove this thread from the dev section.
That guide does not even have source pointing to the right place.. Makes my blood boil.
Sent from my Desire HD using Tapatalk

If it is a question then it is in the wrong section and it might be deleted.
Anyhow, untill it is not deleted, you can look in these posts:
http://forum.xda-developers.com/showthread.php?t=905003
http://forum.xda-developers.com/showthread.php?t=857537
I've used these posts for the first time, got root, but not full root. Had downgraded the radio, but when i wanted to upgrade the radio it told me that i hadn't root, and got serious problems connecting to pc. so I've installed an offical RUU and use ATM TOOL
---- ATM TOOL -----
Simply use this tool. This is the best tool, as it querys the phone if it can or not be downgraded/rooted/unlocked:
http://forum.xda-developers.com/showthread.php?t=1037315
That is what i have used. Now i don't remember if i had radio 2.37
But you will have to downgrade it anyhow.

Check this out:
http://forum.xda-developers.com/showthread.php?t=905003