IMPORTANT: I don't have time waiting on IRC sitting on my ass, I need to sleep. so this final package wasn't tested as I don't have this device myself, but I'm pretty sure it'll work alright. again sorry for the delay, I was busy in life (new place to live in, RhodiumW, making a living etc... not in order of importance ). this release could still be waiting if I wanted to wait for someone to do final release test but I'll just let you try it.
--below text is copied from my PPCGeeks thread--
OK right now I don't have time for the final tests (am still without a device) but I suppose it works. let me know if it does.
Update: it was tested at ppcgeeks and works.
Instructions:
first, if you have GSM treo pro (NOT CDMA, NOT SPRINT/VERIZON/TELUS), this is for your device. it is for PANT100.
steps:
0) if you have Vista or Windows 7, make sure you have latest WMDC.
1) download Hard-SPL package from attachment, extract to an empty local folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run PANTHER_GSM_HSPL exe from the folder
4) follow steps in the program!
5) it should go to tricolour screen now, i.e. SSPL mode, and show 0.59.C-SSPL. now follow steps in the RUU that's launched by now.
6) SPL flashes, device automatically reboots, job done. if you get any errors, follow the instructions offered by the program.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.59.CMONEX.
NOTE: you will not see the SPL version during normal boot!
to enter bootloader mode to see version: with the device turned on, press and hold the Camera button along with the Power button, then press the reset button with the stylus tip, then release the Camera and Power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically or problems with USB connection after SSPL was loaded, please copy SSPL-Manual-PantherGSM.exe from the SSPL-Manual-PantherGSM_V059.zip attachment to the device and run it (device must be plugged in to USB). then once the screen is in SSPL, run CustomRUU from Panther_CustomRUU.zip attachment manually and flash NBH file from PantGSM_HardSPL059.zip.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the HardSPL.
[SIZE=+2]finally, if you wish to thank me with a donation[/SIZE], you can do so by clicking the link the HardSPL program offers, or here: http://hpcmonex.net/htc/pantc/panther.htm
Troubleshooting tips:
- read the instructions
- read the instructions
- read the instructions
- if you have USB issues:
1. anyone having problems with the device entering SSPL automatically or problems with USB connection after SSPL was loaded, please copy SSPL-Manual-PantherGSM.exe from the SSPL-Manual-PantherGSM_V059.zip attachment to the device and run it (device must be plugged in to USB). then once the screen is in SSPL, run CustomRUU from Panther_CustomRUU.zip attachment manually and flash NBH file from PantGSM_HardSPL059.zip.
2. if it still has connection error in SSPL screen, try unplugging and replugging the USB
3. try different USB port, PC, etc.
4. when there are sync issues, the program also suggests installing this file on the phone: http://hpcmonex.net/roms/enablerapinew.cab, just making a note here too.
steps for stock SPL restore:
--posted soon-- (edit: mmm reminder to myself, this one has full overwrite prot.)
THIS IS AWESOME!!!
...I don't have time to test it yet, though. In the morning, for sure! Can someone get this working and make instructions for WM 6.5?
The Treo Pro just got a new breath of life!!
Thanks cmonex! I'll be donating to you in the morning!
Thanks for this, I've been long waiting for this, and I hope someone will make 6.5 GSM ROM soon
Downloading it now, i really hope I will not f*ck up my phone, i will post feedback in soon Someone better start making WM6.5 for it !!!! soon as well
OK when you tested it out... make sure to not flash CDMA roms, because that won't boot and you'll have to reflash to GSM rom
it keep giving me ERROR 260, Connection error, will it work if i try to flash it form memory card ?
vladimir2989 said:
it keep giving me ERROR 260, Connection error, will it work if i try to flash it form memory card ?
Click to expand...
Click to collapse
SD was untested so I dont recommend that...
is the device in 0.59-SSPL screen?
ok, i just did the whole process it said Congratulations but when i went to bootloader to check it says SPL.59.C-SSPL
Correction: IT WORKED !!!
i had to enter bootloader by pressing and hold the Camera button and the Power button, then reset button (b4 i just entered it through utility)
im happy
now who is making WM6.5 here ?
vladimir2989 said:
Correction: IT WORKED !!!
i had to enter bootloader by pressing and hold the Camera button and the Power button, then reset button (b4 i just entered it through utility)
im happy
now who is making WM6.5 here ?
Click to expand...
Click to collapse
I dont own a Treo Pro. However, if someone can provide a raw dump of a GSM Treo Pro, I'll build a rom kitchen and post it here.
if u give me, step-by-step guide how to get RAW dump i'll do it... and where can i download all the tools ...
Download ItsUtils from here, and extract the zip.
http://nah6.com/itsme/itsutilsbin-20090515.zip
Connect your Treo Pro using ActiveSync or WMDC
Run these commands. The first time you run them, you will have to allow a dll to run on your device. Just follow the on screen prompts.
pdocread.exe -w -d FLASHDR -b 0x800 -p Part00 0 0x31f000 Part00.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part01 0 0x3c0000 Part01.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part02 0 0x4d40000 Part02.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part03 0 0x6980000 Part03.raw
NightRaven said:
Download ItsUtils from here, and extract the zip.
http://nah6.com/itsme/itsutilsbin-20090515.zip
Connect your Treo Pro using ActiveSync or WMDC
Run these commands. The first time you run them, you will have to allow a dll to run on your device. Just follow the on screen prompts.
pdocread.exe -w -d FLASHDR -b 0x800 -p Part00 0 0x31f000 Part00.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part01 0 0x3c0000 Part01.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part02 0 0x4d40000 Part02.raw
pdocread.exe -w -d FLASHDR -b 0x800 -p Part03 0 0x6980000 Part03.raw
Click to expand...
Click to collapse
download site posted is not working
http://uploading.com/files/b3346f99/Part00.raw/ - Part00.raw
http://uploading.com/files/1mf8m9f2/Part01.raw/ - Part01.raw
uploading the rest now....
http://uploading.com/files/16ema238/Part02.raw/ - Part02.raw
They are downloading now.
I'll be glad to help out with this too, when I get home from work. Can we use the existing ROMS available, or are those specifically for CDMA?
jasphair said:
I'll be glad to help out with this too, when I get home from work. Can we use the existing ROMS available, or are those specifically for CDMA?
Click to expand...
Click to collapse
Those are specifically for CDMA.
http://uploading.com/files/2a6fab9d/Part03.raw/ - Part03.raw
is that all u need NightRaven ?
Related
Hi
I installed wm2005 1.60c wwe and now my xda doesn't work. I have no phone, no calendar or contacts. camera & recorder buttons don't work and no gprs connection. I get an error saying cprog.exe isn't working.
Not sure what went wrong. Didn't fully understand the instructions being a brave newbie I went ahead regardless. Also didn't backup! (duh)
These are the instructions I followed
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
6. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
7. Run HimaUpgradeUt.exe
8. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
9. Detach your device from the cradle.
10. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
At the end when I pressed the dpad nothing happened so I did a soft reset instead. Also at the beginning of the instructions it said this
Extract the decrypted versions of the nbf files
by entering the following commands at the command prompt:
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
2. Modify the operator ID in the nbfs to the value you require
by entering the following commands at the command prompt
substituting <operator> with the required value:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba
3. Update the crc values for each of the decrypted files
by entering the following commands at the command prompt:
xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba
4. Encrypt the files back into the nbf files by entering
the following commands at the command prompt:
xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306
which I didn't understand about the command prompt and ignored so thats probably why I have the problem. Can anyone help me with this?????
1.60?
why not try aku2 and abv
try getting tofclock 2.01 rom which i think is still the most stable rom and flash again
Ignoring the command prompt stuff is fine and won't have messed up your device, it is simply to get the ROM to be in a language other than english, if you have trouble with putting an english ROM on your device (for instance if you own an Arabian handset you will have to do this part)
Did you format storage and wipe the registry? Did you get through the whole flash process properly? The instructions should have worked, but you should have been able to press DPAD after the wipe (dpad is the direction pad for up-down, left-right movement).
Hi!
I've been having the same problem - along with the device no longer sync'ing with my pc. How do I wipe the storage and delete the registry entries?
Thanks,
Xale
R-cook the rom, and follow the instruction until the last step carefully
Thanks for your help - could you be a little more specific? or link to where i can get r-cook and these instructions?
thanks,
Xale
xale said:
Thanks for your help - could you be a little more specific? or link to where i can get r-cook and these instructions?
thanks,
Xale
Click to expand...
Click to collapse
Download c_shekhar rom, and cook the rom to try. There is instruction inside or in the first page..
http://forum.xda-developers.com/showthread.php?t=287941
Thanks to POF and all his good men we have now finally got hardspl and super cid available for our kaisers now.
The next step is to start building cooked roms which will be available soon as soon as we find a way around the some tools which aren't compatable with the kaiser.
I have managed to dump and start re-building the rom but stuck at second process of the ImgFS Tools Version
This is what I have encountered so far.
1. Dump rom is ok
2. ImgfsFromDump imgfs.bin imgfs-new.bin ok
3. ImgfsToNb imgfs-new.bin os.nb.payload os-new.nb.payload came with error msflsh50 headernot found. exiting. If i can bypass this then the next step will be merging the os.nb which i think possibility it might work and might not work.
Hope all the senior pros out there could give us a hand in this
@POF dONATIONS WILL BE SENT TO YOU TODAY
I'm not sure what that error is but even when you try to dump the xip from the os.nb process went ok but actually no files are dumped.
If anyone has dumped the rom and xip using pofs recommendation here http://forum.xda-developers.com/showthread.php?t=334680 can you please upload, as I am getting errors on my vista machine
duttythroy said:
If anyone has dumped the rom and xip using pofs recommendation here http://forum.xda-developers.com/showthread.php?t=334680 can you please upload, as I am getting errors on my vista machine
Click to expand...
Click to collapse
I can upload the dumped mine, but is spanish one....
Do you want it?
One question, what imgfs tools are you using? (give me a link, please, i'm trying to dump part03 dumped, but gives me a " Unable to load compression dll" error, and i have all files from mamaich's ZIP in the same folder...)
EDIT: The Imgfs partition is Part02, not Part03 (i don't know what is), so you must use ImgfsToDump with Part02.raw to get dumped the Imgfs.
same tools
jcespi2005 said:
I can upload the dumped mine, but is spanish one....
Do you want it?
One question, what imgfs tools are you using? (give me a link, please, i'm trying to dump part03 dumped, but gives me a " Unable to load compression dll" error, and i have all files from mamaich's ZIP in the same folder...)
Click to expand...
Click to collapse
i'm using the same tools but only difference I am dumping the latest htc rom posted somewhere here recently.
pdocread method keep giving me errors.
I am trying all sorts at the moment
I have tried cooking a rom using the kitchen everything went ok apart from getting the error.
error building default hv and user hv
If I remember right you have to set the evirmental variable
austinsnyc said:
If I remember right you have to set the evirmental variable
Click to expand...
Click to collapse
hi mate can you be more specific, killing myself here to find a way to re-compile the rom
Its my birthday today and the wife has the whole day planned out for me! Figures the day after HardSPL comes out so I am not going to be much help to you guys today sorry to say. I'll be back in about 3 hours and then have about 2 to spend helping out with the dumping and cooking methods. Also Dutty you should have your computer dual boot with XP and Vista i have found its the only way really to cook fast and right. I have a Vista Key that works on any vista be it basic, prem... or ultimate. Just make sure you install XP first on a seperate partition since XP always loads on the first partition then load Vista.
Here this will help you a bunch!!!
http://forum.xda-developers.com/showthread.php?t=249836
AND THIS
3) Download rdmsflsh.pl script
4) Extract the contents of imgfs by running these commands making sure that the raw file and script are in the same directory:
(Windows users should run the commands from Windows Command Prompt)
c:\dump> mkdir files
c:\dump> perl rdmsflsh.pl -d files Part02.raw
[...]
1334 0047 2006-01-24 11:37:24 direct16.2bp
1334 0045 2006-01-24 11:29:32 alerts.bmp
1334 0047 2006-01-24 11:38:28 PNotes.2bp
1263 0047 2006-01-24 11:29:44 seekthumb96S.gif
1256 0047 2006-01-24 11:38:28 question.bmp
1248 0045 2006-05-30 09:59:42 ding.amr
statistics:
16595 [ 0x000040d3 ] compressed
22868 [ 0x00005954 ] datablocks
1521 [ 0x000005f1 ] ent_fffff6fd
767 [ 0x000002ff ] ent_fffff6fe
1013 [ 0x000003f5 ] ent_fffffefb
398 [ 0x0000018e ] ent_fffffefe
768 [ 0x00000300 ] files
397 [ 0x0000018d ] modules
1521 [ 0x000005f1 ] sections
2490 [ 0x000009ba ] uncompressed
c:\dump>All the rom contents will be extracted to the folder named "files".
ok using Jas's info i have been able to fully dump the rom but I am lost on putting it back together for flashing!
austinsnyc said:
ok using Jas's info i have been able to fully dump the rom but I am lost on putting it back together for flashing!
Click to expand...
Click to collapse
thats was the easiest way to dump the rom but when I try to compile it keep getting the same error i mentioned in my first post
I've completed this simple file to help people with flashing.
Whats in the file
Everything needed to install a new OS
-Tmobile RUU
-TouchIT OS's
Current and previous versions of Touch It (ITJEs work)
-Touch it 1.1, 2.0, 2.3
Several additional .cabs I run on my device
-Touch IT Fixes
-Slide2Unlock
-Calculator skin
-screen capture program
-HTC Equalizer
-Flash player bundle and core player (for youtube to work)
-Sliding sounds
This file started for me personally in helping me flash my phone. It was a folder I kept all my files so at any time I could totally restore my device without having to hunt all over the net to get cabs I had installed.
For help installing, please visit my thread in my sig.
Here is the megaupload link : http://www.megaupload.com/?d=SWV6KOSK
great work my friend
Great Scott. I think I made it in that package.
Any who, this is good work all in all. Excellent.
Nice... Very nice.
Helps a lot so we don't have to be looking all over the forum when we have to reflash the phone .
Thanx
TochFlo file missing, please upload!
Hello Tyler.
Thanks for putting this together. Here is my problem. I installed everything, run a fix.cab file but still can't get the cube to appear. I had the version 2 before and I simply assigned TouchFlo to one of the buttons. The TouchFlo application or shortcut was installed in Programs/TouchFlo folder. After installing your version, I don't see the TouchFlo in that folder, nor do i see it anywhere in the Button Settings. Am I missing something? I only found a shortcut file in the Windows directory. But copy/paste that didn't solve. My question is can someone with working Version 2.3 upload TouchFlo.exe file from Windows directory for me so I can copy it where it is supposed to go? Or do I need to reflash and re-install? Thanks!
coolmen777 said:
Hello Tyler.
Thanks for putting this together. Here is my problem. I installed everything, run a fix.cab file but still can't get the cube to appear. I had the version 2 before and I simply assigned TouchFlo to one of the buttons. The TouchFlo application or shortcut was installed in Programs/TouchFlo folder. After installing your version, I don't see the TouchFlo in that folder, nor do i see it anywhere in the Button Settings. Am I missing something? I only found a shortcut file in the Windows directory. But copy/paste that didn't solve. My question is can someone with working Version 2.3 upload TouchFlo.exe file from Windows directory for me so I can copy it where it is supposed to go? Or do I need to reflash and re-install? Thanks!
Click to expand...
Click to collapse
Hmmmmm.. were there any errors in your flashing?
for me (running 2.3) I hit start > programs > TouchFlo > then either TF settings or TouchSettings.. Those control the options for button mapping and cube activation.
If that folder isint there on your phone, then try reinstalling the rom, because its definitely there for me out of this package I made for myself.
That's a good idea Tyler. I would probably recomend this to be a sticky.
TylerC161 said:
I've completed this simple file to help people with flashing.
Whats in the file
Everything needed to install a new OS
-Tmobile RUU
-TouchIT OS's
Current and previous versions of Touch It (ITJEs work)
-Touch it 1.1, 2.0, 2.3
Several additional .cabs I run on my device
-Touch IT Fixes
-Slide2Unlock
-Calculator skin
-screen capture program
-HTC Equalizer
-Flash player bundle and core player (for youtube to work)
-Sliding sounds
This file started for me personally in helping me flash my phone. It was a folder I kept all my files so at any time I could totally restore my device without having to hunt all over the net to get cabs I had installed.
For help installing, please visit my thread in my sig.
Here is the megaupload link : http://www.megaupload.com/?d=SWV6KOSK
Click to expand...
Click to collapse
uhhhhhhhhh
i really don't know what i'm doing. i downloaded the .rar file and i don't know what i'm doing. please help haha.......
xxrealtalk92xx said:
i really don't know what i'm doing. i downloaded the .rar file and i don't know what I'm doing. please help haha.......
Click to expand...
Click to collapse
You need a way to unpack the .rar - winrar is the oem program for that, but it's trialware, and that's no good. I found 7 zip here when I went looking for a free way to extract a .rar.
I've had to run the RUU twice already. I get the "unknown status" error box during upgrade but the upgrade cmd screen on my computer shows no errors. What could I be doing wrong?
hidavi said:
I've had to run the RUU twice already. I get the "unknown status" error box during upgrade but the upgrade cmd screen on my computer shows no errors. What could I be doing wrong?
Click to expand...
Click to collapse
You're supposed to get the unknown error status.
Read this.
WOOT! Works.
I did the soft reset for the ASerg Policies, but not for the other two "first" cabs seperately. After soft resetting after installing each one seperately, it worked!
Question: Does the HTC 4350 work with the TouchIT 3.0? I don't think so since everyone keeps recommending 2.3, but I'm hopeful for someone to confirm that it does...
Also waiting for 4.0., but again, I get the feeling that it won't work.
2.3 is a WING keyboard. The other two work with the Herald keyboard. So, yes, it works.
hidavi said:
WOOT! Works.
I did the soft reset for the ASerg Policies, but not for the other two "first" cabs seperately. After soft resetting after installing each one seperately, it worked!
Question: Does the HTC 4350 work with the TouchIT 3.0? I don't think so since everyone keeps recommending 2.3, but I'm hopeful for someone to confirm that it does...
Also waiting for 4.0., but again, I get the feeling that it won't work.
Click to expand...
Click to collapse
I'm using the Touch-IT 3.0 for some time now and I'm very satisfied with itje's ROM. If you wanna upgrade your Herald then I cleary recommend this ROM.
Happy new Year!!!
I Wonder
Does the "2.3 Fixes" cab set up the Wing keyboard? If so would it do the same for other TouchIT Roms causing the bug with the Wings?
Lost MMS Ability
I got Touch-It working perfectly on my Wing with only one problem. I could not send or receive MMS messages. Does anyone know how to set it up? Thanks in advance.
WTF, i'm going crazy
I'm on my dozenth flash and am beginning to go crazy... below is an exact list of what I'm doing each time, please let me know what kind of stupid things i'm doing wrong.
1: Starting Fresh - entering bootloader and running RUU_Atlas_TMO_US_4[1].10.531.3_4.1.13.37_02.83.90_Ship.exe
2: Finishing initial setup after fresh os install
3: Copying asergpolicies.cab and running from phone, soft reset
4: Copying cert_specs.cab and running from phone, soft reset
5: Copying enablerapi.cab and running from phone, soft reset
6: Activesync connection as guest
8: Phone into Flight mode
9: Running 1__UPGRADE_ROM.bat from the Touch it for Wing 2.3 folder
10: Only the "unknown status" message shows on phone, computer takes approx. 5 mins to install and finish.
11: Hard Reset
12: Will NEVER get past t-mobile splash screen
Did i miss something? I consider myself a decently intelligent person, and i have probably read and tried a half dozen different walkthroughs for this, and nothing has ever gotten me past the splash.
isolated_epidemic said:
I'm on my dozenth flash and am beginning to go crazy... below is an exact list of what I'm doing each time, please let me know what kind of stupid things i'm doing wrong.
1: Starting Fresh - entering bootloader and running RUU_Atlas_TMO_US_4[1].10.531.3_4.1.13.37_02.83.90_Ship.exe
2: Finishing initial setup after fresh os install
3: Copying asergpolicies.cab and running from phone, soft reset
4: Copying cert_specs.cab and running from phone, soft reset
5: Copying enablerapi.cab and running from phone, soft reset
6: Activesync connection as guest
8: Phone into Flight mode
9: Running 1__UPGRADE_ROM.bat from the Touch it for Wing 2.3 folder
10: Only the "unknown status" message shows on phone, computer takes approx. 5 mins to install and finish.
11: Hard Reset
12: Will NEVER get past t-mobile splash screen
Did i miss something? I consider myself a decently intelligent person, and i have probably read and tried a half dozen different walkthroughs for this, and nothing has ever gotten me past the splash.
Click to expand...
Click to collapse
This is an OLD process. We have more reliable ways now. If you have a wing, they're safe to use. Read this. Follow this. And download a newer ROM. The newest being WM6.1:
Ttran's OpenTouch V3.0
ijte's TouchIT any flavor of V4 (I believe it's V4...) or ItsBlack
My own kitchen which lets you create your own custom version of JustClean
papamopps's version of TouchIT called ItsPapaBlack.
Argg...
I have followed this step by step.
I started with a fresh rom from the kit. Since my wing was a brick when I started from previous attempts. I extracted the .nhb file, renamed it hearimg.nhb and brought it back to life that way. I copied the three files to the handset and ran them, and then soft reset. When I run the upgrade batch file it errors out until it gets to the .nb file. I also get an error on the handset as well. I am not sure what I am doing wrong? Any idears?
Think I found out why it is not working..
@echo off
cls
ECHO ***********************************************************************
ECHO * *
ECHO * HTC Herald Upgrade *
ECHO * *
ECHO * Total process may take about 6-15 minutes depending on CPU speed. *
ECHO * *
ECHO ***********************************************************************
pause
ECHO Start Time: %TIME%
@set /P dummy="Initializing"<NUL
cecopy EnableRapi.cab dev:\ >NUL
@set /P dummy="."<NUL
cecopy Cert_SPCS.cab dev:\ >NUL
@set /P dummy="."<NUL
cecopy extunlock.exe dev:\ >NUL
sleep4
@set /P dummy="."<NUL
cerun.exe -b CE:\Windows\wceload.exe \Cert_SPCS.cab /noui >NUL
sleep4
@set /P dummy="."<NUL
sleep4
@set /P dummy="."<NUL
cerun.exe -b CE:\Windows\wceload.exe \EnableRapi.cab /noui >NUL
sleep4
@set /P dummy="."<NUL
sleep4
@set /P dummy="."<NUL
cerun.exe -b CE:\extunlock.exe /noui >NUL
sleep4
@set /P dummy="."<NUL
cecopy clattrib.exe dev:\ >NUL
sleep4
ECHO *
cecopy roattrib.exe dev:\ >NUL
sleep4
cerun.exe -b CE:\ROattrib.exe /noui >NUL
@set /P dummy="."<NUL
sleep4
@set /P dummy="."<NUL
ECHO *
@set /P dummy="Writing the new AKU OS ROM"<NUL
@set /P dummy="."<NUL
sleep4
@set /P dummy="."<NUL
ECHO *
rem pdocwrite.exe OS.nb 0 0x3900000
pdocwrite.exe OS.nb
ECHO End Time: %TIME%
ECHO *************************************************************
ECHO * *
ECHO * Congratulations! (If there are no error messsages) *
ECHO * You have Finished the Upgrade *
ECHO * *
ECHO * Please Hard Reset your Herald *
ECHO * *
ECHO *************************************************************
Playsound.exe
Pause
This is the batch file for the upgrade..
cerun.exe -b CE:\Windows\wceload.exe
This file is not in my windows directory??
hi all my reconstructed orange uk rom is now ready for download.
1. you need to run uspl and then install uspl for help check out (http://forum.xda-developers.com/showthread.php?t=330909)
2. then when phone has started you can run flash.exe in the rom folder.
3. once the phone has rebooted and you have your new orange uk rom run flash inside splashscreen folder for the orange splash.
for some reason i couldnt get it to work with all items together so we have to do three steps.
Warning: I have tested this by flashing to my own e650 but you do flash at your own risk.
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
No radios are included but they are available on the ftp as my rom will be hopefully.
ftp://ftp.xda-developers.com/Uploads/Smartphone/Vox/Radios/
Thanks to Dr Gonzo for his kitchen and help and Jockyw2001 for his excellent uspl
hoyler30589 said:
hi all my reconstructed orange uk rom is now ready for download.
1. you need to run uspl and then install uspl for help check out (http://forum.xda-developers.com/showthread.php?t=330909)
2. then when phone has started you can run flash.exe in the rom folder.
3. once the phone has rebooted and you have your new orange uk rom run flash inside splashscreen folder for the orange splash.
for some reason i couldnt get it to work with all items together so we have to do three steps.
Warning: I have tested this by flashing to my own e650 but you do flash at your own risk.
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
No radios are included but they are available on the ftp as my rom will be hopefully.
ftp://ftp.xda-developers.com/Uploads/Smartphone/Vox/Radios/
Thanks to Dr Gonzo for his kitchen and help and Jockyw2001 for his excellent uspl
Click to expand...
Click to collapse
post some screenshots.
Great job, it works!
But the first "picture" is HTC is it normal?
what is additional in this rom than wm 6.1?
lerameur said:
Great job, it works!
But the first "picture" is HTC is it normal?
Click to expand...
Click to collapse
yeh the first picture is htc you need to run flash.exe inside the splash folder then you will get an orange one.
zeeshee said:
what is additional in this rom than wm 6.1?
Click to expand...
Click to collapse
this is the original orange rom for those of us that need it to send fone back for warranty.
hoyler30589 said:
this is the original orange rom for those of us that need it to send fone back for warranty.
Click to expand...
Click to collapse
Do you think you can do it with this rom?
ftp://xda:[email protected]/Uploads/Smartphone/Vox/ROMs/E650_ROM_version_1.22.70.3.zip
It's the french version and it's 1.22...
lerameur said:
Do you think you can do it with this rom?
ftp://xda:[email protected]/Uploads/Smartphone/Vox/ROMs/E650_ROM_version_1.22.70.3.zip
It's the french version and it's 1.22...
Click to expand...
Click to collapse
ill have a go, will let you know later on today
lerameur said:
Do you think you can do it with this rom?
ftp://xda:[email protected]/Uploads/Smartphone/Vox/ROMs/E650_ROM_version_1.22.70.3.zip
It's the french version and it's 1.22...
Click to expand...
Click to collapse
thats not the french rom ive reconstructed it and its romanian. if you know someone who has a working french version if you dump the rom i can reconstruct it for you, im in uk so i dont have any chance of finding anyone.
ive managed to add french language to the rom though, if you need it let me know and ill upload it for you.
I've succeed to put the rom in french but i don't know if the version of french rom is the same of uk one...
Here is the french dump orange, 3 raw files...
Can you see if it is possible to reconstruct it?
http://rapidshare.com/files/104498313/part00.rar.html
Sorry if my english is bad...
[EDIT] I'm about to find some information i will tell you when i'll know more [/EDIT]
lerameur said:
I've succeed to put the rom in french but i don't know if the version of french rom is the same of uk one...
Here is the french dump orange, 3 raw files...
Can you see if it is possible to reconstruct it?
http://rapidshare.com/files/104498313/part00.rar.html
Sorry if my english is bad...
[EDIT] I'm about to find some information i will tell you when i'll know more [/EDIT]
Click to expand...
Click to collapse
ill have a go and post bk tonight. your english is fine.
hoyler30589 said:
if you know someone who has a working french version if you dump the rom i can reconstruct it for you, im in uk so i dont have any chance of finding anyone.
Click to expand...
Click to collapse
Could you reconstruct polish rom? If yes, what do I have to do?
mmokrzycki said:
Could you reconstruct polish rom? If yes, what do I have to do?
Click to expand...
Click to collapse
yeh sure i can try for you, you just need to dump the three parts of the rom for me and then upload them to somewhere like rapidshare.
download the file located at:
http://nah6.com/~itsme/itsutilsbin-20080313.zip
extract to c:\rom
then start - run - cmd
type
cd..
then press enter
cd..
then press enter
cd rom
then press enter
"Below are the steps required to dump the ROM. Take care to check that the partition sizes match your phone."
type:
pdocread.exe -l
then press enter
youll then get something like the following:
58.82M (0x3ad1000) DSK1:
| 2.09M (0x217400) Part00
| 3.32M (0x352800) Part01
| 53.40M (0x3567000) Part02
making sure the 0x3567000 is the number for ypur part as these nums are different on every rom.
type: (this can take a short while)
pdocread -w -d DSK1: -p Part02 0 0x3567000 Part02.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x3567000, Part02.raw)
then type: (these will be quite quick)
pdocread -w -d DSK1: -p Part01 0 0x352800 Part01.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x352800, Part01.raw)
then type:
pdocread -w -d DSK1: -p Part00 0 0x217400 Part00.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x217400, Part00.raw)
when the above has finished zip or rar the raw files from c:\rom and then upload the rar to rapidshare and send me link.
hoyler30589 said:
hi all my reconstructed orange uk rom is now ready for download.
1. you need to run uspl and then install uspl for help check out (http://forum.xda-developers.com/showthread.php?t=330909)
2. then when phone has started you can run flash.exe in the rom folder.
3. once the phone has rebooted and you have your new orange uk rom run flash inside splashscreen folder for the orange splash.
for some reason i couldnt get it to work with all items together so we have to do three steps.
Warning: I have tested this by flashing to my own e650 but you do flash at your own risk.
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
No radios are included but they are available on the ftp as my rom will be hopefully.
ftp://ftp.xda-developers.com/Uploads/Smartphone/Vox/Radios/
Thanks to Dr Gonzo for his kitchen and help and Jockyw2001 for his excellent uspl
Click to expand...
Click to collapse
Is it not possible to have this Orange HomeScreen like in the Polish and Romanian ROM's
http://forum.xda-developers.com/attachment.php?attachmentid=79277&d=1207263252
Roland
Rolandh said:
Is it not possible to have this Orange HomeScreen like in the Polish and Romanian ROM's
http://forum.xda-developers.com/attachment.php?attachmentid=79277&d=1207263252
Roland
Click to expand...
Click to collapse
we need a uk rom of 1.22 i only have old rom, i was going to try and extract orange pluggin but its against rules. if you know anyone with a uk e650 on the new orange rom dump files and send me them and i can then reconstruct it.
link to ftp for radio files says permission denied.
How can I get them or can you put them on rapidshre perhaps ?
I have got the rom from rapidshare ok.
I am plannin on trying the wm 6.1 rom update but want to be able to put the original orange ram back on if I don't like it or want to sell the phone later.
What exactly is the radio part for. bluetooth/wifi ?
Will I not be able to use that if I put the rom on without it ?
hi ill try looking for radio links but if u try win mobile 6.1 rom that doesnt change your radio so therefore you are ok,
the radio controls phone signal bluetooth and wifi.
before you flash check what version of orange rom you got cos theres some people with a newer rom.
to check press start and then settings and then more and about and then look at the operator number and if its 1.22 will you msg me as thats newer and i need the newer rom.
hope that helps
rich
hoyler30589 said:
hi ill try looking for radio links but if u try win mobile 6.1 rom that doesnt change your radio so therefore you are ok,
the radio controls phone signal bluetooth and wifi.
before you flash check what version of orange rom you got cos theres some people with a newer rom.
to check press start and then settings and then more and about and then look at the operator number and if its 1.22 will you msg me as thats newer and i need the newer rom.
hope that helps
rich
Click to expand...
Click to collapse
Might be in luck.
Rom version 1.22.61.3
Operator version 22.122.1.613
Actually not sure know if that means rom is 1.613 because you said operator number.
Rom version is listed above that though and is as above. 1.22.61.3
Is that what your after ?
In any case I have no idea about how to backup up the rom to send to you or my radio parts to enable me to put it back if needed after trying 6.1
Hi Hoyler,
My S710 are in warranty and i need revert to my original ROM.
My model is S711 (vresion S710 brazilian).
I have the dump files in my machine.
You can convert the RAW filles in NBH file for me?
Thanks,
hoyler30589 said:
yeh sure i can try for you, you just need to dump the three parts of the rom for me and then upload them to somewhere like rapidshare.
download the file located at:
http://nah6.com/~itsme/itsutilsbin-20080313.zip
extract to c:\rom
then start - run - cmd
type
cd..
then press enter
cd..
then press enter
cd rom
then press enter
"Below are the steps required to dump the ROM. Take care to check that the partition sizes match your phone."
type:
pdocread.exe -l
then press enter
youll then get something like the following:
58.82M (0x3ad1000) DSK1:
| 2.09M (0x217400) Part00
| 3.32M (0x352800) Part01
| 53.40M (0x3567000) Part02
making sure the 0x3567000 is the number for ypur part as these nums are different on every rom.
type: (this can take a short while)
pdocread -w -d DSK1: -p Part02 0 0x3567000 Part02.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x3567000, Part02.raw)
then type: (these will be quite quick)
pdocread -w -d DSK1: -p Part01 0 0x352800 Part01.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x352800, Part01.raw)
then type:
pdocread -w -d DSK1: -p Part00 0 0x217400 Part00.raw
then press enter and it should say:
CopyTFFSToFile(0x0, 0x217400, Part00.raw)
when the above has finished zip or rar the raw files from c:\rom and then upload the rar to rapidshare and send me link.
Click to expand...
Click to collapse
hoyler30589 said:
To download rom click on the link below:
http://rapidshare.com/files/104153931/E650-_orangeuk_1.14.61.2.rar.html
Click to expand...
Click to collapse
Could anybody upload this file on any other file hosting? For examle on mediafire.com, badongo.com etc....
I can't download files from Rapidshare and Megaupload because of my internet connection
Thanks in advance.
I tried to dump my pharos rom for a guy who needs it: http://forum.xda-developers.com/showthread.php?t=417330
While editing the registry HKLM\Security\Policies\Policies valuename '00001001' I changed it to dword:1
So far no problems
In the next step I tried to check that all the partition sizes reported by pdocread were correct. Here I got the first error message (see screenshot).
I tried to skip the verification of the partition sizes reported by pdocread and tried to go on with the reported partition sizes. But here it's the same error message again and I can't go on with further steps (see screenshot).
My pharos is not modified in any way, has no sim lock and the original shipped rom. No HardSPL so far.
in the command line you need to change "FLASHDR" with "DSK1:"
this is the right command:
pdocread -w -d DSK1: -p Part00 0 0x313400 Part00.raw
remember that the the os is Part02.raw
bye
Copy the files included in this zip to your tools directory and use this bat file to dump the firmware. You will get the SYS and OEM folders on the dump directory. It only dumps part02.
I'm trying to do a automated dumper like elf's one, but it isn't finished.
Files missing..
Thanks to both of you for your help.
@jose_sonseca: Your tool is absolutly fantastic ****many thanks****
But I still need two files, one is something like ...prepare_imgfs...
Where can I find them...?
You need itsutils (if you have pdocread, it's ok), and imgfs tools -> http://forum.xda-developers.com/showthread.php?t=249836 Download imgfs_tools_182.zip
They include prepare_imgfs and viewimgfs. DMP2PKG tool is included in my zip file.
jose_sonseca said:
You need itsutils (if you have pdocread, it's ok), and imgfs tools -> http://forum.xda-developers.com/showthread.php?t=249836 Download imgfs_tools_182.zip
They include prepare_imgfs and viewimgfs. DMP2PKG tool is included in my zip file.
Click to expand...
Click to collapse
Thank you - Great
Very nice job!!!
I search this to my Touch PRO
Thx a lot!!