Related
Prophet_WM5_AKU2.3_lvsw_edition (v20061114) - parent PDAmobiz_AKU2.3:
What we will get:
SPL: 02.20.000X
ROM version: 2.15.13.27 WWE
ROM date: 3/9/06
Radio version: 02.47.21
Protocol version: 4.1.13.24
ExtRom version: 2.20.7.110
You should download:
First part (~49Мб)
Second part (~32Мб)
You should follow these steps:
1) Turn your device on and connect to your computer. After that - run Step1_Prophet_WM5AKU2.3_lvsw_edition.exe
2) Don't unplag your USB cable. You should wait for splash screen and others dialogs (screen, region ..etc). If you see troubles with codepage - won't be in panick!
3) When you will see the splash screen and when ActiveSync will start to connect, it will ask you some questions. You should answer OK for first question and Cancel for second.(that's why you will be connected as giest)
4) You should run Step2_Prophet_WM5AKU2.3_lvsw_edition.exe and wait about 20 minutes. Attention! You wont see progress bar!
5) When the program write that your device was flashed, you should tap SPACE on your computer and make hardreset for your device.
6) Then you should wait for splash screen and other dialogs. After that you will see the installation of extended rom.
7) Thats gerat! You did it!
Prophet_WM5_AKU2.3_lvsw_edition (v20061112) - parent PDAmobiz_AKU2.3:
+ removed all junk-reg values
+ many bug fix in rom
+ free RAM 30Mb
+ increase performance
+ add MMSAutoDisconnect
+ add DisconnectButton
+ CommManager Update
DOWNLOAD_v20061112 (31.7Mb)
Prophet_WM5_AKU2.3_lvsw_edition (v20061111) - parent PDAmobiz_AKU2.3:
1) removed PDAmobiz banners and other mentions
2) removed Junk-Soft
3) new version sim-manager
4) new version cab-installer (view free space, and other patchs)
5) wm today plugin (Jamin default today plugin)
6) bluetooth-stereo support (a2dp)
7) standart headset volume
8) standart CPU clock
9) standart pool size
10) standart soft-key changes
11) all europe regions!!!
12) all europe operator names!!!
DOWNLOAD_v20061111 (29.9Mb)
!!!!Before use my RomUpdate (v20061111 & v20061112), please downgrade to ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
p.s. Sorry, my English very bad.
Thanks a lot.
But with AKU 3.2 i have a big problem, there is sometimes no charge by usb cable! So i will downgrade tonight with this version AKU 2.3.
Hum, i have download your file, i unzip the file but the name is 2006-11-11_Prophet_WM5AKU3.2_lvsw_edit ??? 3.2 !
I have tested, its just a bad name, it's a 2.3 AKU version.
fooar said:
Thanks a lot.
But with AKU 3.2 i have a big problem, there is sometimes no charge by usb cable! So i will downgrade tonight with this version AKU 2.3.
Hum, i have download your file, i unzip the file but the name is 2006-11-11_Prophet_WM5AKU3.2_lvsw_edit ??? 3.2 !
I have tested, its just a bad name, it's a 2.3 AKU version.
Click to expand...
Click to collapse
Very true.....i had the same problem on charging phone thru USB with AKU 3.2 beta and yesterday i downgraded to 2.3 ROM.....
I observe a very small problem with 2.3 ROM...that when i get diff. lang for option Set as Ringtone (using File explorer) when i select a media file ...anyone has an idea on how to put this in english...
lvsw rom
i use your aku 3.2 rom now
i can charge on usb and everything is working perfectly
as in your aku 2.3 rom what i used so far
thanks dude, you are great
Wireless Profiles kept after reboot?
On LVSWs other 3.2 version my wireless profiles are not kept after rebooting the device, can someone with THIS ROM confirm that they are either kept or not?
Thanks in advance...
lvsw,
Have you added ClearVue ?
I've tested yesterday AKU3.2 and there isn't.
It's important to view PDF files.
Thanks
please tell us if the charging bug has been fixed. this is a major problem, i encontered problems even with a wall charger in the previous 3.2 pdamobiz rom.
thanx
Ok i have installed this version on my G4
1) Thereis no bug for charging with usb
2) ClearVue is installed
3) Thereis no GPRS disconnect button
You can install this cab for GPRS disconnect button http://modernnomads.info/wiki/index.php?page=Enable+the+GPRS+disconnect+button+and/or+timer
fooar said:
Ok i have installed this version on my G4
1) Thereis no bug for charging with usb
2) ClearVue is installed
3) Thereis no GPRS disconnect button
You can install this cab for GPRS disconnect button http://modernnomads.info/wiki/index.php?page=Enable+the+GPRS+disconnect+button+and/or+timer
Click to expand...
Click to collapse
Has this release HTC task manager to close programs with "X" instead minimize ? AKU 3.2 has, but not ClearVue.
jema said:
Has this release HTC task manager to close programs with "X" instead minimize ? AKU 3.2 has, but not ClearVue.
Click to expand...
Click to collapse
no, HTC task manager only come with AKU3.2.
I'm surprised because i have installed now PDAMobiz_Prophet_WM5AKU2.3_v2330 and HTC task manager is present...but not in lvsw edition
Looks like a great release.
How does it compare to 16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe? as im currently running this one.
Thanks
NEW UPDATE!!! http://forum.xda-developers.com/showpost.php?p=1051229&postcount=1
I just configured my phone with the rom released on 11/11/2006... is there something to do If I want the latest rom (v20061112) without loosing all my informations and programs installed?
By the way, I have spb backup if it can help...
thank you lvsw for this great rom!!! this is the best I used so far... aku 3.2 rom was not stable for me... it just hang after installing spb pocket plus
zadigre said:
I just configured my phone with the rom released on 11/11/2006... is there something to do If I want the latest rom (v20061112) without loosing all my informations and programs installed?
By the way, I have spb backup if it can help...
thank you lvsw for this great rom!!! this is the best I used so far... aku 3.2 rom was not stable for me... it just hang after installing spb pocket plus
Click to expand...
Click to collapse
NOT USE restore backup! In new rom many reg-bug fix!
lvsw said:
NOT USE restore backup! In new rom many reg-bug fix!
Click to expand...
Click to collapse
so there are no easy way to upgrade except hard reset and restore my data file in my documents?
zadigre said:
so there are no easy way to upgrade except hard reset and restore my data file in my documents?
Click to expand...
Click to collapse
No.... sorry.....
thanks for "add DisconnectButton"
lvsw said:
No.... sorry.....
Click to expand...
Click to collapse
do not be sorry, you are doing a great job with those rom!!!
do I have to re-program the rom with the lastest dopod or I just have to upgrade with your package if I already upgraded with the previous version?
Jeff said:
On LVSWs other 3.2 version my wireless profiles are not kept after rebooting the device, can someone with THIS ROM confirm that they are either kept or not?
Thanks in advance...
Click to expand...
Click to collapse
Will you please explain what you call "profiles", just the setting under the network card?
Hi This is the link to download the software it is FREE from Avaya Web Site
http://support.avaya.com/japple/css/japple?temp.documentID=321884&temp.productID=251422&temp.releaseID=321115&temp.bucketID=108025&PAGE=Document
SEE The Attachment
Can some One Help
maybe i can change the cab to support WM6
installed fine on mda running tnt 5.0 with htc home no touchflo running radio 2.19.11 on tmobile us, it has sssooooooo many settings i am losing hair figuring it out...but looks like an awesome software..
i have test it
on wizard with wm6 tnt it is installing but on wm6 NBD 7.4 Not
Can you Help
i think you might have to ask the rom cooker, for nbd 7.4, i am not as knowledgeable as the cookers, i just tried it and it worked, maybe go thru all the registries and compare... maybe some modules or files missing... why not use the tnt 5.0? good luck, sorry couldnt help much.
Avaya One-X 4.0.25 on WM6
Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Entere your PIN
Now you have an Avaya One-X as a dialer.
Enjoy !
While the WM6.0 and WM6.1 edited ROMs with the newest NETCF v3.5 come
out one by one, most of them have a problem of incompatible NETCF and SQL with some softwares.
< For example >
Software 1. " Six Law" -------> e-book database of law, sqlce30.ppc.wce5.cab is needed for it (also installed manually)
Software 2. " All-In-Me" ------> business software, sqlce.wce4.armv4.cab and sql.wce4.armv4.cab are needed for it (also installed manually)
After the two softwares mentioned above installed and run,
I keep getting the error message listed below:
System.IO.FileLoadException : Could not load file or assembly
'System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes'
or one of its dependencies.
The located assembly's manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)
After the discussion in this thread (especially thanks to juju-35), we get a
solution to fix that problem. List as below:
For people who need the solution to fix the incompatible NETCF and SQL,
Just collect the files mentioned here and install according to the instructions.
1. NETCFv2.wm.armv4i.cab-----> I don't know why I couldn't upload this file
But you can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0 /WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it. It provides the assembly
of 'System.Data.SqlServerCe, Version=3.0.3600.0.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
If anyone occurs any other special situation, please post it here for discussion.
Craig Shih
Is there any way to have downward compatible?
Maybe the sqlserverce is in the rom files so we can't made any modification to them.
i dont see my rom listed
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
austinsnyc said:
i dont see my rom listed
Click to expand...
Click to collapse
Sorry, I had spend too much time to reflash my TyTN II so that there might be some other ROMs not yet tried.
I 'll give it a try when I get some free time.
Thanks.
L26 WM 6.1 Professional WWE V5
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Thank you my friend,
I was reading your thread before and saw which ROM's are compatible,
it was easy to take out the Sqlce from one of these
Cheers,
Leo
craig_shih said:
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Click to expand...
Click to collapse
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
_Alex_ said:
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Click to expand...
Click to collapse
Laurentius26 said:
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
Click to expand...
Click to collapse
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
_Alex_ said:
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
Click to expand...
Click to collapse
Hi, Alex, your rom is also very nice. The only one issue I occurred is that
after installing the E-book database of law I got an error message
as follows,
The file 'SLink' cannot be opened. Either it is not signed with a trusted certificate,
or one of its components cannot be found. If the problem persists, try
reinstalling or restoring this file.
I have installed sqlce30.ppc.wce5.cab and NETCFv35.wm.armv4i.cab manually,
but still got the error message.
Sorry that I didn't describe this in the first post.
Passion! said:
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
Click to expand...
Click to collapse
Hello,
If your problem(s) come form the .NET CF 2.0 vs 3.5, which I think was mentioned to be the problem for esword in particular, there was actually a workaround posted in Quentin's ROM thread. I ran into the same problems with some of my cabs, I did the changes suggested in the thread, and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsoft website.(Install file called NETCFSetup35.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it (prog can be found in Program Files/.NET directory on your PC)
THe NEcfg.exe is a nifty utility that allows you to detect all .NET CF versions installed on your PPC, and apply a default version to all programs but setup a few programs to run on a different .NET CF (like 2.0).
This way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the default on those ROMs is 3.5).
Hope this helps.
Juju
juju-35 said:
Hello,
there was actually a workaround poste on this in Quentin's ROM thread. I did it and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsfto website.( Install file called NETCFSetuov45.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it
THe NEcfg.exe is a nifty utilisy that allows you to detect all .NET CF versions installed and apply a default version to all porograms but setup a few programs to run on a different .NET CF (like 2.0).
THis way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster,, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the feault on thsoie ROMs is 3.5).
Hope this helps.
Juju
Click to expand...
Click to collapse
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
craig_shih said:
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
Click to expand...
Click to collapse
Need a lot of help myself (!), so I am glad to help others if/when I can. It is the whole point of a community
Make the NetCF Fix more easier
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation:
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
craig_shih said:
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation:
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
Click to expand...
Click to collapse
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
_Alex_ said:
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
Click to expand...
Click to collapse
Thank you. I'll edit the topic and contents as soon as possible.
Craig Shih
For the fix to be activated, the NetCF Config folder should be copied
to main memory. For me, if I put the NetCF Config folder in micro SD card,
the fix doesn't work. So I copy the folder to Program Files folder in main memory.
won't install for me...
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
vestaviajag said:
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
Click to expand...
Click to collapse
i have this problem when trying to install .net 3.5
any help on this error?
Finally I fixed the problem with my ATT 6.1 19209 (Dutty's Official Build)...
If you were having any problems sending or receiving MMS this fixed the problem for me....I have to thank all those that gave me advice, and finally with some tinkering I got it to work properly...
What I did....
1. Installed Dutty's 6.1 Official 19209 ROM
2. Let Connections Setup run its course and reset.
3. Installed restoreHiddenProxy...and made a regedit file that copies the correct settings for the ATT build
4. Go to Settings -> Connections -> Connections -> Advance -> Select Networks -> First box should say MEdia Net.
4. Soft reset
5. Works perfect on my rom.
Attached is the regedit settings...which basically is the ATT settings from a cab that was posted for ....just didn't feel like reinstalling MMS over to take up 3.6 mb in the rom.
If anyone can try this to verify if it works for them it would be greatly appreciated.....
Thanks again for all those that helped..
Ryncppr
Does this work on other WM6.1 ROM which had MMS problem?
In Advanced Config if I press Menu -> More Settings -> TouchFlo 3D, I get an "error loading TF3D configuration" and then continues to screen that has the TF3D tabs and date fornat.
Is that error expected, or it only happens to me device? Also, are there any settings in Advanced Config that are incompatible with Topaz, and I shouldn't mess at all with them?
Thanks
jcan said:
In Advanced Config if I press Menu -> More Settings -> TouchFlo 3D, I get an "error loading TF3D configuration" and then continues to screen that has the TF3D tabs and date fornat.
Is that error expected, or it only happens to me device? Also, are there any settings in Advanced Config that are incompatible with Topaz, and I shouldn't mess at all with them?
Thanks
Click to expand...
Click to collapse
What ROM, what version of Manila do you use? Maybe the Advanced Config version you have is not compatible with your Manila version.
Works fine on my Topaz.
ROM is 1.39.405.2 WWE. I don't know how to find the Manila version, but anyhow it is the default one included in the stock ROM...
jcan said:
ROM is 1.39.405.2 WWE. I don't know how to find the Manila version, but anyhow it is the default one included in the stock ROM...
Click to expand...
Click to collapse
manila 2.0 is not suported by avanced config , but some settings should work ( like display time format )
criszz said:
manila 2.0 is not suported by avanced config , but some settings should work ( like display time format )
Click to expand...
Click to collapse
OK then! This is what happens with my device, as I said earlier. So, there is nothing I should worry about.