TF3D Error in Advanced Config 3.3 - Touch Diamond2, Pure Themes and Apps

In Advanced Config if I press Menu -> More Settings -> TouchFlo 3D, I get an "error loading TF3D configuration" and then continues to screen that has the TF3D tabs and date fornat.
Is that error expected, or it only happens to me device? Also, are there any settings in Advanced Config that are incompatible with Topaz, and I shouldn't mess at all with them?
Thanks

jcan said:
In Advanced Config if I press Menu -> More Settings -> TouchFlo 3D, I get an "error loading TF3D configuration" and then continues to screen that has the TF3D tabs and date fornat.
Is that error expected, or it only happens to me device? Also, are there any settings in Advanced Config that are incompatible with Topaz, and I shouldn't mess at all with them?
Thanks
Click to expand...
Click to collapse
What ROM, what version of Manila do you use? Maybe the Advanced Config version you have is not compatible with your Manila version.
Works fine on my Topaz.

ROM is 1.39.405.2 WWE. I don't know how to find the Manila version, but anyhow it is the default one included in the stock ROM...

jcan said:
ROM is 1.39.405.2 WWE. I don't know how to find the Manila version, but anyhow it is the default one included in the stock ROM...
Click to expand...
Click to collapse
manila 2.0 is not suported by avanced config , but some settings should work ( like display time format )

criszz said:
manila 2.0 is not suported by avanced config , but some settings should work ( like display time format )
Click to expand...
Click to collapse
OK then! This is what happens with my device, as I said earlier. So, there is nothing I should worry about.

Related

TouchFlo Cube CAB

Hi!..Since a week I have the TYTN 2! And what I see is; cooked ROMS with TouchFlo cube..Is there a .cab file with a working TouchFlo Cube?
i'd love that one too
Bram87 said:
Hi!..Since a week I have the TYTN 2! And what I see is; cooked ROMS with TouchFlo cube..Is there a .cab file with a working TouchFlo Cube?
Click to expand...
Click to collapse
Attached is a good one.
taiseer999 said:
Attached is a good one.
Click to expand...
Click to collapse
Hope it works THANKS!
I installed thic cab file but I could not run touch cube.
When I try to touch screen I gets some error message like this ;
" The file 'biotouch' cannot be opened"
What can I do for solving this problem?
Thanks
digiman22003 said:
I installed thic cab file but I could not run touch cube.
When I try to touch screen I gets some error message like this ;
" The file 'biotouch' cannot be opened"
What can I do for solving this problem?
Thanks
Click to expand...
Click to collapse
Go to Kaiser section; Dutty stickied thread; download SdkCerts, install it then try again
Works perfectly for me except when i press Email or SMS/MMS. It just wont open anything.
It brings the top task bar above the cube and that is it.
Any ideas?
you need to change the parameter service in the settings to NULL like the others.thats what worked for me
That worked a treat, thanks for that.
Is there any way to make it go to the email folder or to the SMS folder dependant on which one you press. It just takes me to the last messaging folder viewed. I would really like it to open a blank SMS for me.
Go to the SCLFP 1-60 thread by Slither & doante to get his Beta 7. It rocks & is customizable. It rocks.
neva dinova said:
you need to change the parameter service in the settings to NULL like the others.thats what worked for me
Click to expand...
Click to collapse
Hi do you know eaxctly where go to to change this paremeter?
taiseer999 said:
Attached is a good one.
Click to expand...
Click to collapse
Sorry but I cant seem to get it work. All I get is 2 programs of settings in my program directory..
Cube won't save changes
Thanks all for the info. Ran the linked cab. I was able to get the cube installed and it is functioning well, including gestures.
However, when i run the cube settings i first get a "cannot read settings - is HTCTouchFLO installed? then it goes to the settings, lets me change them, but they don't save. Give me a "could not save settings - is htc homeplug installed? system.nullreference.exception"
sorry for the newbie question, i wanted to try some of the tools before i jump to a new rom. (still with stock TILT)
thanks in advance for helping me overcome my ignorance.
p.s. already went through the "'Touch Settings' Program (Updated) - Change your cube programs AND weather location." for touch settings, same problem
thanks for all of your hard work...this is working great on my tilt...but i cant seem to get the sms and email link to work...any suggestions...thanks in advanced...
SdkCerts
Dear ,
Thank you to tell me where can i find the SdkCerts.CAB file for the WM6?
akroshy1 said:
Dear ,
Thank you to tell me where can i find the SdkCerts.CAB file for the WM6?
Click to expand...
Click to collapse
http://www.4shared.com/file/37343459/78d124a5/sdkcerts.html

slow start menu help

i have a sprint touch pro phone. after a hard reset my start menu has a delay.once i click it, it take about 2 seconds for the menu to drop down. i had the same problem when i got the phone new, but somehow fixed it with tweaks. i really have no idea which tweak helped this. any info would help. thanx
anyone?????????
still looking for a solution
load NetCF 3.5 and Adv Config 3.3...
Then tweak the performance settings to the max in all settings. Reboot and that should do it.
You can also check on the large menu settings. (are u using the Large Menu?)
Lastly, I would just install the latest cooked rom since it seems like you just hard reset anyhow.
See if any of the above help, if not, I will try to think of something else, unless someone knows any other ideas...good luck
noellenchris said:
load NetCF 3.5 and Adv Config 3.3...
Then tweak the performance settings to the max in all settings. Reboot and that should do it.
You can also check on the large menu settings. (are u using the Large Menu?)
Lastly, I would just install the latest cooked rom since it seems like you just hard reset anyhow.
See if any of the above help, if not, I will try to think of something else, unless someone knows any other ideas...good luck
Click to expand...
Click to collapse
i already have the NetCF 3.t with adv config 3.3 but what settings should i have under the performance menu? i tweaked some of them but wasnt really sure which one is better. thanx
stas333 said:
i already have the NetCF 3.t with adv config 3.3 but what settings should i have under the performance menu? i tweaked some of them but wasnt really sure which one is better. thanx
Click to expand...
Click to collapse
File sys cache = Enabled
File sys Cache = 8mb
File Sys Filter Cache = 16384
Glyph cache = 128
these give me the best results..

Advanced Config

If I loaded a ROM for my Kaiser, and it doesn't have the advanced config option, is there a way to load it on otherwise? I would like to change the size of my scroll bars and stuff
mcjewpants said:
If I loaded a ROM for my Kaiser, and it doesn't have the advanced config option, is there a way to load it on otherwise? I would like to change the size of my scroll bars and stuff
Click to expand...
Click to collapse
Search this forum and you'll find a download for it, the latest version is 3.3
Dave

Is there any simple program to switch 3G enabled/disabled?

Hi!
I need it to simply enabled or disabled the 3G.
Have you got something?
The perfect solution would be a "3G on/off" in Comm Manager?
A cab file exists for it?
Check Advanced Config.... you can change the Comm manager and have this button...
nickfranky said:
Hi!
I need it to simply enabled or disabled the 3G.
Have you got something?
The perfect solution would be a "3G on/off" in Comm Manager?
A cab file exists for it?
Click to expand...
Click to collapse
Hey this one!!
Advanced Config has also this possibility....
I've installed the Advanced Config Tool 3.3, but my problem still there...
I can put the 3G on/off in Com manager, but it is not active, if I tap on it, it didn't do anything ...
Am I miss something?
Advanced Config Tools "latest" 3.3 ver. in 10/27/2008 ???
Maybe this is the problem...
It's not working full functional on Topaz...
may be this is what u need.
http://forum.xda-developers.com/showthread.php?t=453518
BanSwitch
Or U try this tool...
It's running on my TD2 without any issues. U can find it at http://www.commmgrpro.com
It's not free but worth the money!
Regards
Frank
lovemeeveryone2009 said:
may be this is what u need.
http://forum.xda-developers.com/showthread.php?t=453518
Click to expand...
Click to collapse
That's it, you're my man!
Thanks

[Q] Change Start Menu with QMenu is better?

Hi guys, i read about nrg's last rom and the qmenu he has on it.
is there any performance or advantage for us to use the qmenu?
will the device have more memory in general ?
can we have some instructions on how to install it, and transparently replace it with 6.5.5 menu?
+1 if anyone have information how to
- installe quickmenu
- remove default win starmenu
TeDeV said:
Hi guys, i read about nrg's last rom and the qmenu he has on it.
is there any performance or advantage for us to use the qmenu?
will the device have more memory in general ?
can we have some instructions on how to install it, and transparently replace it with 6.5.5 menu?
Click to expand...
Click to collapse
i use cht energy roms and have around 25-30 MB more ram with quickmenu that with the default start menu. i can't help with the installation because qmenu is already cooked into the rom and there is a shortcut to toggle between the two start menu options.
hope this helps
thorfr said:
+1 if anyone have information how to
- installe quickmenu
- remove default win starmenu
Click to expand...
Click to collapse
Definitely, with quickmenu you have 25mb more memory. And if we come to installing, quickmenu is integrated into Energy Rom so no need to install, to be able to use it you just have to activate it from the settings menu. But if you mean to install it into another ROM without it, here is the link of quickmenu.
http://forum.xda-developers.com/showthread.php?t=340352

Categories

Resources