i have a sprint touch pro phone. after a hard reset my start menu has a delay.once i click it, it take about 2 seconds for the menu to drop down. i had the same problem when i got the phone new, but somehow fixed it with tweaks. i really have no idea which tweak helped this. any info would help. thanx
anyone?????????
still looking for a solution
load NetCF 3.5 and Adv Config 3.3...
Then tweak the performance settings to the max in all settings. Reboot and that should do it.
You can also check on the large menu settings. (are u using the Large Menu?)
Lastly, I would just install the latest cooked rom since it seems like you just hard reset anyhow.
See if any of the above help, if not, I will try to think of something else, unless someone knows any other ideas...good luck
noellenchris said:
load NetCF 3.5 and Adv Config 3.3...
Then tweak the performance settings to the max in all settings. Reboot and that should do it.
You can also check on the large menu settings. (are u using the Large Menu?)
Lastly, I would just install the latest cooked rom since it seems like you just hard reset anyhow.
See if any of the above help, if not, I will try to think of something else, unless someone knows any other ideas...good luck
Click to expand...
Click to collapse
i already have the NetCF 3.t with adv config 3.3 but what settings should i have under the performance menu? i tweaked some of them but wasnt really sure which one is better. thanx
stas333 said:
i already have the NetCF 3.t with adv config 3.3 but what settings should i have under the performance menu? i tweaked some of them but wasnt really sure which one is better. thanx
Click to expand...
Click to collapse
File sys cache = Enabled
File sys Cache = 8mb
File Sys Filter Cache = 16384
Glyph cache = 128
these give me the best results..
Related
Why doesn't the cab file work...
It says sucess reboot now ... but after the reboot no ext rom.
I want to reflash L2 & Beast 0.5 update 1
because i still get my T-mobile splash screen...
I need to unlock the EXT some how, are there any other tools / reghacks / tips ?
I even flashed to wm5 because the EXT ROM UNLOCKER tool did work in the earlier days..
Thanks Guys
This Works for me every time, every ROM!
Extended rom is unlocked and read/write ready by registry settings:
HKLM\SYSTEM\STORAGEMAN\AUTOLOAD\TRUEFFS_DOC1
--> BOOTPHASE=2
HKLM\SYSTEM\STORAGEMAN\PROFILES\TRUEFFS_DOC1
--> FOLDER=XROM
--> MOUNTHIDDEN=0
Hope this helps, and be careful, the EXTENDED ROM usually has extra features or fixes that may be needed after a hard reset.
Drongo said:
Extended rom is unlocked and read/write ready by registry settings:
HKLM\SYSTEM\STORAGEMAN\AUTOLOAD\TRUEFFS_DOC1
--> BOOTPHASE=2
HKLM\SYSTEM\STORAGEMAN\PROFILES\TRUEFFS_DOC1
--> FOLDER=XROM
--> MOUNTHIDDEN=0
Hope this helps, and be careful, the EXTENDED ROM usually has extra features or fixes that may be needed after a hard reset.
Click to expand...
Click to collapse
Thanks ! I'll try to open it up and flash again.
I had the GSM crash Again on the L26&Beast AKU 0.5 Update 1 today.
I cant find those strings...
I have just finished a quick lite rom based on Helmi_ C AKU 0.70 rom which I find very stable even for a beta.
Everything Remains the Same apart from what I took out the rom which as follows:
1. Htc audio manager
2. HTC HOME Plugin
3. Office Mobile
4. OneNote Mobile
5. BT_FTP=1_2_30490_1
6. JbedJava_MIDP=0_0_20070726_1_1
7. HTC task manager
8. Voice Speed dial
9. WindowsLive
Rom is working fast with only one bug which i'm trying to fix which is:
After Flashing the rom and after configuration and reset the rom wont boot. But if you reset it before CONFIGURATION the rom works ok as normal. very strange.
I will try to fix it but I have got all the configuration cabs which can be install manual. These files are:
1. Configure_COMgr175.CAB
2. Configure_DDI171.CAB
3. Configure_GPS.CAB
4. Configure_Key.CAB
5. Configure_WLAN.CAB
6. WiFicountrycode.CAB
Total storage memory is 133.16 mb and free program is 74.15 mb
Cabs can be found in my thread which is located here.
http://forum.xda-developers.com/showthread.php?t=332438
Link>>> Rom has got more work to do will fix it as soon I got some more time.
Still a problem with configuration just soft rest before config starts.
Install config cabs below, enjoy
Thanks to POF and OLIPRO for all there hard work and tadzio with contributing in helping us with customising his tools so they can work for kaisers. And thanks to everyone who was helping with the kaiser project.
I will be making or modyfing roms as lite as possible which I think is the best way to go as programs gets updated regular.
reservation
Reservation for updates
cant wait for this lite rom! please dont forget to take out extra junk like windows update and windows live messenger. The more lite the better
duttythroy said:
Coming Soon
Click to expand...
Click to collapse
Why do you do thisto us?
I hope soon means very soon soon
The rom is working fine just need to reset befor it starts its configuration. I will post it as soon as I can. If I find the fix I will post the fixed rom with more stuff taken out the rom.
link is up
link is up
Still a bug with config but cabs are available for now
Awesome, this is the lite ROM I was looking for! Will try it out asap.
cheers
maryjos said:
Awesome, this is the lite ROM I was looking for! Will try it out asap.
Click to expand...
Click to collapse
helmi_c done a great job with the rom I didnt have to do nothing with it might strip it down further for who love ultr lite roms but not losing any stability of course
There is more work to be done on this rom
I realise there is more work to be done on this ROM. First I forgot and allowed the configuration to go on. So I had to reflash (forgot HR would do) and prevent installation of the configuration. I then installed the cabs posted, but device refused to boot after soft-reset
So I am back on Helmi's ROM.
Dutty, you must have removed the power icon in settings as I could not find it to see how much longer I could go on trying to revive my device without running out of power
victoradjei said:
I realise there is more work to be done on this ROM. First I forgot and allowed the configuration to go on. So I had to reflash (forgot HR would do) and prevent installation of the configuration. I then installed the cabs posted, but device refused to boot after soft-reset
So I am back on Helmi's ROM.
Dutty, you must have removed the power icon in settings as I could not find it to see how much longer I could go on trying to revive my device without running out of power
Click to expand...
Click to collapse
same here I must have deleted something in the rom I also found huge battery drain my highly suspicions are one of the activation cabs is causing this.
Sorry guys my first rom didnt made it as yet will pull it down as i think its not stable.
Cheers
My apologies
I have taken down the rom found a huge battery drain in rom.
Well, I installed it and everything went okay. Installed the extra cabs and looked good. I wanted to try WisBar instead of the start menu app I'd been using before so installed their latest versions. Whoops that made a total mess of things, locked up at the end of install and still was locking up after soft resets. So had to hard reset and start all over again. I've not used this app before, so not sure if it was the ROM causing the problem or not.
duttythroy said:
I have taken down the rom found a huge battery drain in rom.
Click to expand...
Click to collapse
Ah, okay, yeah I've continued to have problems with it, keeps locking up on me when doing a soft reset. So guess it wasn't wisbar that was the problem. I'll go back to the standard HTC Rom for now.
to moderators
Can you please close this thread as lite rom has been made by helmi so thus all support should be in that forum. thanks
Pls list your values with best result for
system cache
filter cache
Glyph cache
I think my Raph is still too slow
thanks
myrin
peter7 said:
Pls list your values with best result for
system cache
filter cache
Glyph cache
I think my Raph is still too slow
thanks
myrin
Click to expand...
Click to collapse
These are the values I've used and everything zips along quite nicely with loads of apps installed.
File system cache: 8MB
File system filter cache 131072
Glyph cache: 64KB
See how you get on with these settings and report back. They are the same setting I had optimised on my Universal and am now using on my touch pro
WizP said:
These are the values I've used and everything zips along quite nicely with loads of apps installed.
File system cache: 8MB
File system filter cache 131072
Glyph cache: 64KB
See how you get on with these settings and report back. They are the same setting I had optimised on my Universal and am now using on my touch pro
Click to expand...
Click to collapse
Hi dear TP-friends.
How do I do these changes?
Do I need a SW for that?
In that case, where do I get it?
Sorry for these elementary questions.
Do you also know how to get rid of the date and the provider name t th front page of the RAPHA
Corsa2 said:
Hi dear TP-friends.
How do I do these changes?
Do I need a SW for that?
In that case, where do I get it?
Sorry for these elementary questions.
Click to expand...
Click to collapse
Do a forum search for the Advanced config Tool. It will let your make these changes, they are under the performance section of the editor. It is very easy to use
l0st.prophet said:
Do a forum search for the Advanced config Tool. It will let your make these changes, they are under the performance section of the editor. It is very easy to use
Click to expand...
Click to collapse
Thanks. I'll do that.
Corsa2 said:
Thanks. I'll do that.
Click to expand...
Click to collapse
Hmm.
DL Advanced config tool and the recommended .NET SW
The .NET 3.5 wont open when I click on the setup icon. What is the procedure to instal .NET and Advanced config tool?
Corsa2 said:
Hmm.
DL Advanced config tool and the recommended .NET SW
The .NET 3.5 wont open when I click on the setup icon. What is the procedure to instal .NET and Advanced config tool?
Click to expand...
Click to collapse
Dowload both files from this thread, then instal the .NET direct of your desktop, it will install the files needed on your TP the next time you do a sync. . As for schaps AC tool, drop the CAB onto the device and install from there
http://forum.xda-developers.com/showthread.php?t=420855
thebiscuitboy said:
Dowload both files from this thread, then instal the .NET direct of your desktop, it will install the files needed on your TP the next time you do a sync. . As for schaps AC tool, drop the CAB onto the device and install from there
http://forum.xda-developers.com/showthread.php?t=420855
Click to expand...
Click to collapse
Why am I always making things more complicated than i it should be.
Well, now its done.
Thanks a lot.
No problem, am happy to help
Simple thing... I wanted to test iFonts in my TP. After installtion phone said it needs newer version of .NET framework. So I installed 3.5 as guide said. Then i restarted the phone but still iFonts doesnt work. I mean I still get the same error. I installed 3.5 again but no can do. Both the Net framework and the iFonts are installed in the device, not in SD card. Just curious to learn things with WM 6 gizmo.
Is there any knowledgement or what?
post a link of the program (homepage) maybe i can help
.NET 3.5 it's worcking very nice
Dl'd from this site.
http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
Btw what version of NET Framework is as default in Touch pro
Ep!cFa!L said:
Dl'd from this site.
http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
Btw what version of NET Framework is as default in Touch pro
Click to expand...
Click to collapse
by default .net in tp is 2.0
try installing this: http://www.tectonicitt.ro/NETCFv35.wm.armv4i.cab.zip
Try enabling it. With a registry editor, go to HKLM--> Software--> Microsoft --> .NETCompactFramework and you should see the 2 versions you have installed change the value of v. 2.xxx to 0 and the value of 3.xxx to 1. Save your changes and soft reset your device. Let us know how it goes.
XL3N7 said:
Try enabling it. With a registry editor, go to HKLM--> Software--> Microsoft --> .NETCompactFramework and you should see the 2 versions you have installed change the value of v. 2.xxx to 0 and the value of 3.xxx to 1. Save your changes and soft reset your device. Let us know how it goes.
Click to expand...
Click to collapse
changing those registry key will make wm to use .net 3.5 by default instead of .net 2 that's all
this is a tweak to increase speed for applications written in .net 3.5
Ok, but first, im totally newb with these things. Normally i've used phone just to talking with some1 so... what is HKML, and how to do soft reset.
Ep!cFa!L said:
Ok, but first, im totally newb with these things. Normally i've used phone just to talking with some1 so... what is HKML, and how to do soft reset.
Click to expand...
Click to collapse
i tested ifontz on my device and it's working
download this version http://thedogcorner.blogspot.com/ from what i read the cab version have some problems
softreset: you have a small button on the right side of usb port press it with the pen it have a hedphone icon over it
ah ofcourse that was softreset This seems to be difficult to prepare phone for specific progs if u have to even edit registry.
Btw i installed FinnishT9.cab but that doesnt give option 'Finnish' on lanquage list. I saw also it disabled Scandic from keypad. Uninstalling that T9 file got back Scandic. Is that also .NET framework dependent thing?
Ep!cFa!L said:
ah ofcourse that was softreset This seems to be difficult to prepare phone for specific progs if u have to even edit registry.
Btw i installed FinnishT9.cab but that doesnt give option 'Finnish' on lanquage list. I saw also it disabled Scandic from keypad. Uninstalling that T9 file got back Scandic. Is that also .NET framework dependent thing?
Click to expand...
Click to collapse
probably not
In Advanced Config if I press Menu -> More Settings -> TouchFlo 3D, I get an "error loading TF3D configuration" and then continues to screen that has the TF3D tabs and date fornat.
Is that error expected, or it only happens to me device? Also, are there any settings in Advanced Config that are incompatible with Topaz, and I shouldn't mess at all with them?
Thanks
jcan said:
In Advanced Config if I press Menu -> More Settings -> TouchFlo 3D, I get an "error loading TF3D configuration" and then continues to screen that has the TF3D tabs and date fornat.
Is that error expected, or it only happens to me device? Also, are there any settings in Advanced Config that are incompatible with Topaz, and I shouldn't mess at all with them?
Thanks
Click to expand...
Click to collapse
What ROM, what version of Manila do you use? Maybe the Advanced Config version you have is not compatible with your Manila version.
Works fine on my Topaz.
ROM is 1.39.405.2 WWE. I don't know how to find the Manila version, but anyhow it is the default one included in the stock ROM...
jcan said:
ROM is 1.39.405.2 WWE. I don't know how to find the Manila version, but anyhow it is the default one included in the stock ROM...
Click to expand...
Click to collapse
manila 2.0 is not suported by avanced config , but some settings should work ( like display time format )
criszz said:
manila 2.0 is not suported by avanced config , but some settings should work ( like display time format )
Click to expand...
Click to collapse
OK then! This is what happens with my device, as I said earlier. So, there is nothing I should worry about.