Related
i havnt been able to install .Net framework on wm6, has anyone had any luck with this?
Dude, WM6 comes with Net CF2, which is the latest one
karhoe said:
Dude, WM6 comes with Net CF2, which is the latest one
Click to expand...
Click to collapse
it does? I'm not able to get the program "sniper" to work cuz i need .Net framework i think. has anyone else been able to get sniper to work?
mikeeey said:
it does? I'm not able to get the program "sniper" to work cuz i need .Net framework i think. has anyone else been able to get sniper to work?
Click to expand...
Click to collapse
Does it say that it needs .net framework when you start it?
mikeeey said:
it does? I'm not able to get the program "sniper" to work cuz i need .Net framework i think. has anyone else been able to get sniper to work?
Click to expand...
Click to collapse
That is the problem with your application, anyway, is sniper the apps used to send BT message?
karhoe said:
That is the problem with your application, anyway, is sniper the apps used to send BT message?
Click to expand...
Click to collapse
1. It is (in addition to, say, Bluezard - see http://forum.xda-developers.com/showthread.php?p=1226139 ); see my related review at, say, http://forum.xda-developers.com/showthread.php?t=277726
2. Dunno if your WM6 contains .NET CF 1. If it doesn't, you'll want to install CF1SP3 available at http://www.winmobiletech.com/sekalaiset/CF1SP3/netcf.all.wce4.ARMV4.rar
3. Moving the thread to General because it is generic enough to have value to generic (not just Tornado) users.
Menneisyys said:
1. It is (in addition to, say, Bluezard - see http://forum.xda-developers.com/showthread.php?p=1226139 ); see my related review at, say, http://forum.xda-developers.com/showthread.php?t=277726
2. Dunno if your WM6 contains .NET CF 1. If it doesn't, you'll want to install CF1SP3 available at http://www.winmobiletech.com/sekalaiset/CF1SP3/netcf.all.wce4.ARMV4.rar
3. Moving the thread to General because it is generic enough to have value to generic (not just Tornado) users.
Click to expand...
Click to collapse
thanks menneisyss. that was a really big help. i will try all of these different options youve given me including bluezard. i actually had tried and looked if you had writen an article on Sniper but no luck, thanks for linking this.
EDIT: i just tried to install CF1SP3 but it told me it wasnt intended for my device. and because i couldnt get CF1SP3 to install, i still can't get Sniper to work.
[email protected] said:
Does it say that it needs .net framework when you start it?
Click to expand...
Click to collapse
no but i had recently installed an earlier version and after the setup it told me i needed it. so yes it told me once, but not every time i start up.
mikeeey said:
no but i had recently installed an earlier version and after the setup it told me i needed it. so yes it told me once, but not every time i start up.
Click to expand...
Click to collapse
Well I remember that when I have started app that needed .net framework on wm5 it said something like that the app cannot start because I don't have .net framework installed.
This is still an ongoing problem for me... Many apps crash saying that it could not find .Net CF 2.0, yet I know that WM6 already comes with it and when I try to install it, it tells me that it already has a newer one installed.
KitChenROM Core 5.2.1908 Build 18508.0.7.0 :
New OEMs :
1. HTC Home New Version (Show HTC Home in Today)
2. Skin WMP.
3. PP=6MB
http://rapidshare.com/files/5396981...CTAIVOI_Core_1908_Build_18508.0.7.0_PP6MB.rar
Good stuff! Thank you . But can anyone share a mirror? Rapidshare's just really too slow!
Great! Thanks
Great job! Thanks.
Just a small note: the version of esmertec java is a bit outdated 20070425. I can prepare a OEM package with 20070802 if you want.
Thanks again
PS: has this rom been completely ported, i.e. all dll rebased and so on?
Great thanks boy_de_ghet great job!!
risidoro said:
Great job! Thanks.
Just a small note: the version of esmertec java is a bit outdated 20070425. I can prepare a OEM package with 20070802 if you want.
Click to expand...
Click to collapse
OK, it seems that the files in your oem package (2007_04_25) and the ones i got in this forum (2007_08_02) are the same. The only differences are in the registry keys, i don't know which keys are the correct ones but i suspect that the ones in your oem package cannot work since they associate jad and jar files with \windows\joedek.exe but there's no such file in \windows. The correct association is with \windows\jbed.exe. Your oem package will probably run ok but it won't let you start midlets installation right from the browser/file manager.
I'm attaching a slightly revised OEM package with correct file association, a link to jbed help in \windows\help and some missing png files added to initflashfiles.dat
Bye
thanks!
...time to light the fire
great job, as usual!
Can you provide some more info?
Which applications are added?
Screenshots?
Thank you very much!
risidoro said:
Great job! Thanks.
Just a small note: the version of esmertec java is a bit outdated 20070425. I can prepare a OEM package with 20070802 if you want.
Thanks again
PS: has this rom been completely ported, i.e. all dll rebased and so on?
Click to expand...
Click to collapse
This KitChenROM haved Esmertec Jbed 20070802.
boy_de_ghet said:
This KitChenROM haved Esmertec Jbed 20070802.
Click to expand...
Click to collapse
Yep, i realised soon after my post. The registry settings however are incorrect (they reports version 2007-04-25 and associate jad/jar to jeodek.exe instead of jbed.exe)
Great work BTW! Thanks
is it real QVGA version of AKU0.7.0 or mix of Universal's VGA AKU0.7.0 with older QVGA resources?
I've just flashed a new rom made with this kitchen. It is BY FAR the fastest rom ever tried!!!
BUT THERE IS A GREAT problem: i cannot access any SIP input methods from any application. All the SIPs (keyboard, letter recogniser and block recogniser have vanished).
EDIT: no more a problem, it went away after a soft reset
i did not read whole post.
i have one question, that "someone" could answer to...
HOW the hell use OLD commgr and OLD dialpad in that one.....i need 100% method for REPLACEMENT of these.
also - how to implement OLD no(fockin) touch touch driver...
I ran the buildos.exe but after finish, I don't see the 80040000-OS.nb in the temp folder anywhere. There's a dump file with all the stuff in it. Gimme a clue someone.
run the CreateRom.bat file...it should be in the same directory with the BuildOS.EXE
thanks, it works now.
problems
i built a rom with this kitchen and after i built it and flashed it to my wizard it will start to boot up for the first time and it will get to where u calibrate the screen and turn itself off and restart...in a endless cycle....this isnt hte only time ive had this problem its happened with other kitchens...i just dont know what the problem is...or how to fix it.....any ideas? any help would b great appricated! thanks!
jug6ernaut said:
i built a rom with this kitchen and after i built it and flashed it to my wizard it will start to boot up for the first time and it will get to where u calibrate the screen and turn itself off and restart...in a endless cycle....this isnt hte only time ive had this problem its happened with other kitchens...i just dont know what the problem is...or how to fix it.....any ideas? any help would b great appricated! thanks!
Click to expand...
Click to collapse
We need to know exactly which options did you enable and which not.
my bad ur right hmm let me see
i deleted(not non selected but actually deleted from the oem folder)
EsmertecJava
Eye on Privacy
Hibernate
Camera
and then added my own oems
coolcam
wm6 Palm Threader
all other options were enabled
palm threader i made myself but i know it works bc ive used it b4...the issue might b with the coolcam...or that i deleted the oems....idk...but ive had this issue b4.
thanks for ur help!
jug6ernaut said:
my bad ur right hmm let me see
i deleted(not non selected but actually deleted from the oem folder)
EsmertecJava
Eye on Privacy
Hibernate
Camera
and then added my own oems
coolcam
wm6 Palm Threader
all other options were enabled
palm threader i made myself but i know it works bc ive used it b4...the issue might b with the coolcam...or that i deleted the oems....idk...but ive had this issue b4.
thanks for ur help!
Click to expand...
Click to collapse
Use the kitchen and don't delete anything or add anything. If that ROM works, start by removing the stuff from the OEM folder and build again. If that works, then you know the problem lies with one of your custom apps.
jug6ernaut said:
my bad ur right hmm let me see
i deleted(not non selected but actually deleted from the oem folder)
EsmertecJava
Eye on Privacy
Hibernate
Camera
Click to expand...
Click to collapse
DO NOT REMOVE CAMERA!!!
It's not a clean package, it includes also some files and reg settings needed elsewhere in the rom. The other packages you listed can be safely removed. bye
While the WM6.0 and WM6.1 edited ROMs with the newest NETCF v3.5 come
out one by one, most of them have a problem of incompatible NETCF and SQL with some softwares.
< For example >
Software 1. " Six Law" -------> e-book database of law, sqlce30.ppc.wce5.cab is needed for it (also installed manually)
Software 2. " All-In-Me" ------> business software, sqlce.wce4.armv4.cab and sql.wce4.armv4.cab are needed for it (also installed manually)
After the two softwares mentioned above installed and run,
I keep getting the error message listed below:
System.IO.FileLoadException : Could not load file or assembly
'System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes'
or one of its dependencies.
The located assembly's manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)
After the discussion in this thread (especially thanks to juju-35), we get a
solution to fix that problem. List as below:
For people who need the solution to fix the incompatible NETCF and SQL,
Just collect the files mentioned here and install according to the instructions.
1. NETCFv2.wm.armv4i.cab-----> I don't know why I couldn't upload this file
But you can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0 /WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it. It provides the assembly
of 'System.Data.SqlServerCe, Version=3.0.3600.0.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
If anyone occurs any other special situation, please post it here for discussion.
Craig Shih
Is there any way to have downward compatible?
Maybe the sqlserverce is in the rom files so we can't made any modification to them.
i dont see my rom listed
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
austinsnyc said:
i dont see my rom listed
Click to expand...
Click to collapse
Sorry, I had spend too much time to reflash my TyTN II so that there might be some other ROMs not yet tried.
I 'll give it a try when I get some free time.
Thanks.
L26 WM 6.1 Professional WWE V5
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Thank you my friend,
I was reading your thread before and saw which ROM's are compatible,
it was easy to take out the Sqlce from one of these
Cheers,
Leo
craig_shih said:
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Click to expand...
Click to collapse
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
_Alex_ said:
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Click to expand...
Click to collapse
Laurentius26 said:
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
Click to expand...
Click to collapse
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
_Alex_ said:
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
Click to expand...
Click to collapse
Hi, Alex, your rom is also very nice. The only one issue I occurred is that
after installing the E-book database of law I got an error message
as follows,
The file 'SLink' cannot be opened. Either it is not signed with a trusted certificate,
or one of its components cannot be found. If the problem persists, try
reinstalling or restoring this file.
I have installed sqlce30.ppc.wce5.cab and NETCFv35.wm.armv4i.cab manually,
but still got the error message.
Sorry that I didn't describe this in the first post.
Passion! said:
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
Click to expand...
Click to collapse
Hello,
If your problem(s) come form the .NET CF 2.0 vs 3.5, which I think was mentioned to be the problem for esword in particular, there was actually a workaround posted in Quentin's ROM thread. I ran into the same problems with some of my cabs, I did the changes suggested in the thread, and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsoft website.(Install file called NETCFSetup35.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it (prog can be found in Program Files/.NET directory on your PC)
THe NEcfg.exe is a nifty utility that allows you to detect all .NET CF versions installed on your PPC, and apply a default version to all programs but setup a few programs to run on a different .NET CF (like 2.0).
This way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the default on those ROMs is 3.5).
Hope this helps.
Juju
juju-35 said:
Hello,
there was actually a workaround poste on this in Quentin's ROM thread. I did it and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsfto website.( Install file called NETCFSetuov45.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it
THe NEcfg.exe is a nifty utilisy that allows you to detect all .NET CF versions installed and apply a default version to all porograms but setup a few programs to run on a different .NET CF (like 2.0).
THis way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster,, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the feault on thsoie ROMs is 3.5).
Hope this helps.
Juju
Click to expand...
Click to collapse
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
craig_shih said:
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
Click to expand...
Click to collapse
Need a lot of help myself (!), so I am glad to help others if/when I can. It is the whole point of a community
Make the NetCF Fix more easier
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation：
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
craig_shih said:
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation：
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
Click to expand...
Click to collapse
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
_Alex_ said:
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
Click to expand...
Click to collapse
Thank you. I'll edit the topic and contents as soon as possible.
Craig Shih
For the fix to be activated, the NetCF Config folder should be copied
to main memory. For me, if I put the NetCF Config folder in micro SD card,
the fix doesn't work. So I copy the folder to Program Files folder in main memory.
won't install for me...
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
vestaviajag said:
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
Click to expand...
Click to collapse
i have this problem when trying to install .net 3.5
any help on this error?
Hello, just received my HD2 ! But with trying to install some software, it mentions the certificates are not ok, so I cannot install. Is this the 'application lock' and how can I unlock it ?
MattRob said:
Hello, just received my HD2 ! But with trying to install some software, it mentions the certificates are not ok, so I cannot install. Is this the 'application lock' and how can I unlock it ?
Click to expand...
Click to collapse
Using a registry editor, set the following values:
Code:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"00001017"=dword:00000090
"00001005"=dword:00000028
"00001001"=dword:00000001
"0000101b"=dword:00000001
"0000101a"=dword:00000001
That should fix it... If the registry editor gives you an error, or you'd rather not use a registry editor, I can whip up a cab/program to do it.
Hm .... I tried that (with the old regeditSTG; but is not working very smooth) but still the same problem. I will try and install another regeditor, to see if that works ... Txs for quick follow up.
I tried it another time, but values seem to be correct now. Still have the application lock issue ... Would you mind making a cab, just to make sure ... ?
MattRob said:
I tried it another time, but values seem to be correct now. Still have the application lock issue ... Would you mind making a cab, just to make sure ... ?
Click to expand...
Click to collapse
Did you soft reset the device?
Yep, a few times already ....
MattRob said:
Yep, a few times already ....
Click to expand...
Click to collapse
Okay... I'll have a look at other things that could be set... What's the exact error it gives?
Unfortunately it is the Dutch version (that one arrived one week earlier here than the UK version), but after installing the software (which I used on my HD (with Dutty's Leo R7 and ALL earlier versions) and I need it to get my server ready for my work exchange server), it says (translated):
The file cannot be opened. It is not signed with a trusted certificate or one of the components cannot be found. U have to install it again or repair it if the problem persists.
MattRob said:
Unfortunately it is the Dutch version (that one arrived one week earlier here than the UK version), but after installing the software (which I used on my HD (with Dutty's Leo R7 and ALL earlier versions) and I need it to get my server ready for my work exchange server), it says (translated):
The file cannot be opened. It is not signed with a trusted certificate or one of the components cannot be found. U have to install it again or repair it if the problem persists.
Click to expand...
Click to collapse
I think that's an issue with the cab/software rather than the certificates... Out of interest, what application is it?
If that would be true, I REALLY have a problem. It is not a 'known' software, I guess. It has been prepared by my company and I have to install it first before I can use our Exchange Server (through Domain Enroll). It is call gprschange.exe
It worked on all former HD Roms and on the XPeria. I will try to set up Exchange server without it. Hopefully it will work .... Will let you know ...
It is not working now ... I cannot connect to Exchange server ... I assume it cannot have anything to do with the 'Dutch' version ? That would be strange, right ? But I cannot understand it worked on all the HD ROM versions, and here it is not working .... And I was so happy I got the HD2 today and now it is not working (for me at least) ...
i don't know if you already have solved the problem, but in some cases, when a cab refuses to install on my tp2, i open it with the wince cab manager on the desktop, remove the setup.dll and repack it again. It might not make any sense at all, but at least you can try it to rule it out.
May be something related to old .net 2?
or have you updated to 3.5 already?
hyellow said:
i don't know if you already have solved the problem, but in some cases, when a cab refuses to install on my tp2, i open it with the wince cab manager on the desktop, remove the setup.dll and repack it again. It might not make any sense at all, but at least you can try it to rule it out.
Click to expand...
Click to collapse
It was the setup.dll causing issues, it's fixed now!
Will move this to Leo Themes and Applications.
i have exactly the same problem with anumber of cabs that worked fine on my touch pro. seems a number of former reg edits are not being picked up as before. the keys i want to change for default folder locations don t work eiter...(see my post)...
oh, that is good...
thanks hyellow ...
Can and chef or anyone that has a stock rom can extract the new version of swype from the new 2.13 Tmobile update rom? I think a lof of us would like to have it as a cab. The new version has the option to enable or disable vib typing, very good feature to have.
romeo0119 said:
Can and chef or anyone that has a stock rom can extract the new version of swype from the new 2.13 Tmobile update rom? I think a lof of us would like to have it as a cab. The new version has the option to enable or disable vib typing, very good feature to have.
Click to expand...
Click to collapse
in the meantime you can use this program. http://forum.xda-developers.com/showthread.php?t=450256 i have used it for some time and love it! it was my solution to the no vibe in swype.
I've had that before, not as good as the one in the new rom.
would love this
http://htcpedia.com/duttys_ime_swype_eb39564dab24a6471/soft/leo-apps.html
not able to test it, cause i am at work.
..but hope that s.o. could tell me, if it's possible to add other dictionarys to swype, like the German one + Germany keyboard layout.
Best regards
worked!
...okay, thought i just take the time for installing it..and it worked!
ive installed it, without deinstalling my old working swype with german dictionary. the old location of swype was Windows/swype.
installed duttys version on the storage card. after rebooting, ive got the new swype version with vibration and fixed problems, like holding keys and getting alternative inputs.
I tried it, works but has same problem as early version of the previous version. I recommend to not install it, it changes your "model name" file under the windows directory to t-mobile leo and could interfere with certain apps or functions that are specific to your carrier. I think this may cause problems with password sign-in too (may result in a hard reset?). Just wait for a reworked version, like for v3.9. Be cautious if u do.
orlandojumpoff said:
I tried it, works but has same problem as early version of the previous version. I recommend to not install it, it changes your "model name" file under the windows directory to t-mobile leo and could interfere with certain apps or functions that are specific to your carrier. I think this may cause problems with password sign-in too (may result in a hard reset?). Just wait for a reworked version, like for v3.9. Be cautious if u do.
Click to expand...
Click to collapse
Just make the installation after a hard reset or a fresh new flash, and you won´t face those issues.
Thanks, let me try it out
Edit: Works fine for me, on NRG rom.
Btw is auto spacing working for anyone? Doesnt work for me it seem.
romeo0119 said:
Btw is auto spacing working for anyone? Doesnt work for me it seem.
Click to expand...
Click to collapse
wokring here for me!
j4n87 said:
http://htcpedia.com/duttys_ime_swype_eb39564dab24a6471/soft/leo-apps.html
not able to test it, cause i am at work.
..but hope that s.o. could tell me, if it's possible to add other dictionarys to swype, like the German one + Germany keyboard layout.
Best regards
Click to expand...
Click to collapse
It works for me... Im going repost this in my sticky if you dont mind. I will keep your URL.
cd993 said:
wokring here for me!
Click to expand...
Click to collapse
What the hell, not doing it for me, let me try to uninstall and reinstall it.
romeo0119 said:
What the hell, not doing it for me, let me try to uninstall and reinstall it.
Click to expand...
Click to collapse
any of you know how to get around the open EnglishUS failed error.. i am on a stock ROM WWE and the swype does install to the program files folder
Athar Mansoor said:
any of you know how to get around the open EnglishUS failed error.. i am on a stock ROM WWE and the swype does install to the program files folder
Click to expand...
Click to collapse
I'm also using a WWE Rom... of Dutty. Installed it on Device or Storage Card?
Ok.. Got it to work..
heres what I did..
Install swype.. it will ask for restart..
Select cancel.. A folder called 'Swype' will be installed to windows..
Copy that folder to program files
soft reset your device..
sywpe will be ready to use..
You can delete the folder from program files once soft reset.
Also this can be done either on storage card or internal device..
both folders must be in same memory location
Happy swyping