Prophet_WM5_AKU2.3_lvsw_edition (v20061114) - parent PDAmobiz_AKU2.3:
What we will get:
SPL: 02.20.000X
ROM version: 2.15.13.27 WWE
ROM date: 3/9/06
Radio version: 02.47.21
Protocol version: 4.1.13.24
ExtRom version: 2.20.7.110
You should download:
First part (~49Мб)
Second part (~32Мб)
You should follow these steps:
1) Turn your device on and connect to your computer. After that - run Step1_Prophet_WM5AKU2.3_lvsw_edition.exe
2) Don't unplag your USB cable. You should wait for splash screen and others dialogs (screen, region ..etc). If you see troubles with codepage - won't be in panick!
3) When you will see the splash screen and when ActiveSync will start to connect, it will ask you some questions. You should answer OK for first question and Cancel for second.(that's why you will be connected as giest)
4) You should run Step2_Prophet_WM5AKU2.3_lvsw_edition.exe and wait about 20 minutes. Attention! You wont see progress bar!
5) When the program write that your device was flashed, you should tap SPACE on your computer and make hardreset for your device.
6) Then you should wait for splash screen and other dialogs. After that you will see the installation of extended rom.
7) Thats gerat! You did it!
Prophet_WM5_AKU2.3_lvsw_edition (v20061112) - parent PDAmobiz_AKU2.3:
+ removed all junk-reg values
+ many bug fix in rom
+ free RAM 30Mb
+ increase performance
+ add MMSAutoDisconnect
+ add DisconnectButton
+ CommManager Update
DOWNLOAD_v20061112 (31.7Mb)
Prophet_WM5_AKU2.3_lvsw_edition (v20061111) - parent PDAmobiz_AKU2.3:
1) removed PDAmobiz banners and other mentions
2) removed Junk-Soft
3) new version sim-manager
4) new version cab-installer (view free space, and other patchs)
5) wm today plugin (Jamin default today plugin)
6) bluetooth-stereo support (a2dp)
7) standart headset volume
8) standart CPU clock
9) standart pool size
10) standart soft-key changes
11) all europe regions!!!
12) all europe operator names!!!
DOWNLOAD_v20061111 (29.9Mb)
!!!!Before use my RomUpdate (v20061111 & v20061112), please downgrade to ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
p.s. Sorry, my English very bad.
Thanks a lot.
But with AKU 3.2 i have a big problem, there is sometimes no charge by usb cable! So i will downgrade tonight with this version AKU 2.3.
Hum, i have download your file, i unzip the file but the name is 2006-11-11_Prophet_WM5AKU3.2_lvsw_edit ??? 3.2 !
I have tested, its just a bad name, it's a 2.3 AKU version.
fooar said:
Thanks a lot.
But with AKU 3.2 i have a big problem, there is sometimes no charge by usb cable! So i will downgrade tonight with this version AKU 2.3.
Hum, i have download your file, i unzip the file but the name is 2006-11-11_Prophet_WM5AKU3.2_lvsw_edit ??? 3.2 !
I have tested, its just a bad name, it's a 2.3 AKU version.
Click to expand...
Click to collapse
Very true.....i had the same problem on charging phone thru USB with AKU 3.2 beta and yesterday i downgraded to 2.3 ROM.....
I observe a very small problem with 2.3 ROM...that when i get diff. lang for option Set as Ringtone (using File explorer) when i select a media file ...anyone has an idea on how to put this in english...
lvsw rom
i use your aku 3.2 rom now
i can charge on usb and everything is working perfectly
as in your aku 2.3 rom what i used so far
thanks dude, you are great
Wireless Profiles kept after reboot?
On LVSWs other 3.2 version my wireless profiles are not kept after rebooting the device, can someone with THIS ROM confirm that they are either kept or not?
Thanks in advance...
lvsw,
Have you added ClearVue ?
I've tested yesterday AKU3.2 and there isn't.
It's important to view PDF files.
Thanks
please tell us if the charging bug has been fixed. this is a major problem, i encontered problems even with a wall charger in the previous 3.2 pdamobiz rom.
thanx
Ok i have installed this version on my G4
1) Thereis no bug for charging with usb
2) ClearVue is installed
3) Thereis no GPRS disconnect button
You can install this cab for GPRS disconnect button http://modernnomads.info/wiki/index.php?page=Enable+the+GPRS+disconnect+button+and/or+timer
fooar said:
Ok i have installed this version on my G4
1) Thereis no bug for charging with usb
2) ClearVue is installed
3) Thereis no GPRS disconnect button
You can install this cab for GPRS disconnect button http://modernnomads.info/wiki/index.php?page=Enable+the+GPRS+disconnect+button+and/or+timer
Click to expand...
Click to collapse
Has this release HTC task manager to close programs with "X" instead minimize ? AKU 3.2 has, but not ClearVue.
jema said:
Has this release HTC task manager to close programs with "X" instead minimize ? AKU 3.2 has, but not ClearVue.
Click to expand...
Click to collapse
no, HTC task manager only come with AKU3.2.
I'm surprised because i have installed now PDAMobiz_Prophet_WM5AKU2.3_v2330 and HTC task manager is present...but not in lvsw edition
Looks like a great release.
How does it compare to 16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe? as im currently running this one.
Thanks
NEW UPDATE!!! http://forum.xda-developers.com/showpost.php?p=1051229&postcount=1
I just configured my phone with the rom released on 11/11/2006... is there something to do If I want the latest rom (v20061112) without loosing all my informations and programs installed?
By the way, I have spb backup if it can help...
thank you lvsw for this great rom!!! this is the best I used so far... aku 3.2 rom was not stable for me... it just hang after installing spb pocket plus
zadigre said:
I just configured my phone with the rom released on 11/11/2006... is there something to do If I want the latest rom (v20061112) without loosing all my informations and programs installed?
By the way, I have spb backup if it can help...
thank you lvsw for this great rom!!! this is the best I used so far... aku 3.2 rom was not stable for me... it just hang after installing spb pocket plus
Click to expand...
Click to collapse
NOT USE restore backup! In new rom many reg-bug fix!
lvsw said:
NOT USE restore backup! In new rom many reg-bug fix!
Click to expand...
Click to collapse
so there are no easy way to upgrade except hard reset and restore my data file in my documents?
zadigre said:
so there are no easy way to upgrade except hard reset and restore my data file in my documents?
Click to expand...
Click to collapse
No.... sorry.....
thanks for "add DisconnectButton"
lvsw said:
No.... sorry.....
Click to expand...
Click to collapse
do not be sorry, you are doing a great job with those rom!!!
do I have to re-program the rom with the lastest dopod or I just have to upgrade with your package if I already upgraded with the previous version?
Jeff said:
On LVSWs other 3.2 version my wireless profiles are not kept after rebooting the device, can someone with THIS ROM confirm that they are either kept or not?
Thanks in advance...
Click to expand...
Click to collapse
Will you please explain what you call "profiles", just the setting under the network card?
Related
Rom version; 2.18.0.0
Build aku 15341 aku.4.0.0.01 WWE
Ipl version ----
Spl version -----
Radio version recommended 2.19
Extended ROM version Faria v5
Htc logo
Splash screen
Page-pool-
YOU MUST HAVE A BOOTLOADE VERSION 2XXX OR ABOVE...(IPL/SPL 2.xx). also your device must be CID unlocked to avoid upgrading problems.
ROM changes
bluethoOth ftp[ NEW] FULLY WORKING
Sim card manager v 5.30 NEW
windows live 10.6.0026.1400 NEW ,THIS IS NOT BETA
PRESS and hold com manager button will toggle between vibrate and sound NEW
fixed rouge reg keys
fixed gprs workaround
Power management tweaked
voip integrated [follow this to make it work; http://forum.xda-developers.com/showthread.php?t=299950
voip button added to the com manager.
dtmf support
Default welcome restored
Added drm support [not tested]
New HTC Phone pad T9 with 16 languages
Extended_rom has been moved to windows. [for g4 support]
ussd service
Windows live/voice command –updated
Zip build; 1.11 25438
pocket XPDF
default today restored
dotfred PIMBAKCUP -in control panel settings...if you dont want it just delete the shorcut....
dotfred TASK MANAGER
Catalogue has been removed and SQL SERVER MOBILE. Why? Because there was no space left in the rom.
BT SIM ACCESS PROFILE.
Camera 3.3 fully working
Media files support added plus new gif engine
New com manager -With option to turn IR on/of!!!
All wireless’ security profiles support added
HTC X [press and old to close activated]
MMs arc-soft 3.5.1.22.c
Java v11.1.7.1023
New Sim services app [stk]
Replaced BT stereo profile with 3.3
Streaming media 2.10
Registry mods;
4 ways navigation added
File explorer set to view all files
AD2P set to DEFAULT
Different gprs icon
Wireless today plug in and redirect app
Mms folder activated
Disabled Microsoft feedback
Time zones change page activated
Disabled error reporting
Cab set to not delete after install
Time zone page on and checked
GPS icon on
Clear type on, landscape and internet explorer
Obex on
GPS com port fix
One line time in today [not lvm]
Time in all pages
Wireless 54g support added
Wireless preload status on upon boot.
if you are new to the wizard forum please start reading this ; http://forum.xda-developers.com/showthread.php?p=1184453#post1184453
Download link
This rom is a close as it can get to the original one.....a super clean rom is also in the way....
This rom is not a hack from another device.
Many thanks to mamaich BEPE AND dr.P FOR ALL THE Support and all the authors/xda of the freeware apps.... and specially.....my wife that lend her wizard to me in order to finish this rom,and for putting up with the many hours i ignored her.
The rom is based in the [REAL THING]
PLEASE DO NOT PM ME ABOUT THE ROM AS I WILL NOT ANSWER ....POST YOUR QUERIES IN THE FORUM FOR THE BENEFIT OF EVERYONE.
Please note that i had no chance of fully testing this rom because my wizard is not fully operational......this rom is intended for users to use it as a base for their own roms....
Therefore my support for this rom will be very limited.
This rom was build as a special request from jwzg and other members.
There will be a supper clean rom....for clean freaks....eheh
Also there will be an updated version of the current "real thing"
rom has been taking down due to a problem in phone settings....
................................................
Thanks for this Faria. This is a clean as I need and want it.
when someone downloads this, can they host it on www.putstuff.com? It is free and there is no download limit.
thanks
Great! I will compare with X-Plore to see witch one is the best.
THANK YOU FARIA
Wait 15 minutes
trojan9x said:
Thanks for this Faria. This is a clean as I need and want it.
when someone downloads this, can they host it on www.putstuff.com? It is free and there is no download limit.
thanks
Click to expand...
Click to collapse
I´m uploading.
Thanks papa
Extended_rom has been moved to windows. [for g4 support
Click to expand...
Click to collapse
How much space does this loose for G3 owners? Is there much work involved moving this back to the Extended_Rom?
What free space is there left.....
Andy
have just flashed
and, the *hang* at 99% is normal methinks, well with my device anyway!
its just 'customised' going to tinker with it tonight!
thank you once again faria!
Maybe delete?
ADB100 said:
How much space does this loose for G3 owners? Is there much work involved moving this back to the Extended_Rom?
What free space is there left.....
Andy
Click to expand...
Click to collapse
Can you delete it after reflashing or would it determine you hardreset another time???
By the way:
Download here: http://putstuff.putfile.com/62915/1383559
Downloaded... Thanks!
Downloading from puttyfree.
Thanks faria, been waiting for it. You're tha best.
can't wait to try it.
Another link...... http://putstuff.putfile.com/62922/5268338
ADB100 said:
How much space does this loose for G3 owners? Is there much work involved moving this back to the Extended_Rom?
What free space is there left.....
Andy
Click to expand...
Click to collapse
none....if you need to add your cabs to the extended rom edit the Config.txt that you will find in windows.
ex...
cab from windows;
CAB: \Windows\mycab.cab
Click to expand...
Click to collapse
cab from the extended rom;
CAB: \Extended_ROM\mycab.CAB
Click to expand...
Click to collapse
if you gonna cook the rom then change this in the registry;
[HKEY_LOCAL_MACHINE\Comm]
"AutoRun"="\\Windows\\autorun.exe"
"AutoRunCFG"="\\Windows\\config.txt"
Click to expand...
Click to collapse
to this;
"AutoRun"="\\Extended_ROM\\autorun.exe"
"AutoRunCFG"="\\Extended_ROM\\config.txt"
Click to expand...
Click to collapse
so far so good
So far so good (thanks for a clean rom faria...this is a perfect rom for me to start practicing cooking on). Only thing i have noticed so far is if you go into the phone settings and hit ok, it stays on that screen (only a soft reset removes it as far as i can tell. i flashed the rom again to make sure that wasnt it). can anyone replicate this?
*edit* end call button can close it.
does this clean rom also include registry wizard? and total commander?
faria said:
none....if you need to add your cabs to the extended rom edit the Config.txt that you will find in windows.
ex...
cab from windows;
cab from the extended rom;
if you gonna cook the rom then change this in the registry;
to this;
Click to expand...
Click to collapse
As always Faria, thanks for your time & effort.
Andy
Can someone pls check whether GPRS connection drop issue has been fixed? Mine drops even with 2.19 radio.
beowolf said:
does this clean rom also include registry wizard? and total commander?
Click to expand...
Click to collapse
Nope... so clean that it doesn't even have a second boot screen (The IPL/SPL screen, Mine is still TMobile )
is there a italian version of it
Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too
you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn
well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support
1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)
Thank you very much.
I'm now downloading and trying the ways you pointed out.
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here
ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster
I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.
Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx
White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx
mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.
Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx
RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx
The New Official 6.1Rom (English)
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
Link:http://rapidshare.com/files/157469239/Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.rar
Mirrors:
http://asapload.com/193326
http://kaiserroms.blogspot.com/
http://www.mediafire.com/download.php?ggnmzywmt2l
plz can upload it on other link
Has this been posted anywhere else? Why is it a October 15 \ 08 ROM and hasn't been up until now?
Any idea on any changes?
Can I flash this with 3.56 HARD SPL?
mdelleman said:
Has this been posted anywhere else? Why is it a October 15 \ 08 ROM and hasn't been up until now?
Any idea on any changes?
Can I flash this with 3.56 HARD SPL?
Click to expand...
Click to collapse
I just download it from HTC-hongkong web site, i think hongkong haven't release 6.1 official rom before, so that's a official release for hongkong I think.
This is what I get from the website.
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
* You can check device ROM version from Start -> Setting -> System -> Device Information -> Version.
Description:
1. Upgrade operating system to Windows Mobile 6.1
IMPORTANT! - please read these instructions carefully before updating your device
1. VERY IMPORTANT! - All files and software on the device will be lost after the update. Please ensure a copy of your important files is backed-up somewhere else.
2. Download the .exe file.
3. The ROM Code can only be updated on HTC TyTN II Hong Kong English Version Device
4. Ensure Activesync v4.5 (or higher) is installed on PC/laptop for OS WinXP and below. For Windows Vista and above there is no need to install ActiveSync.
5. Connect HTC TyTN II to PC/laptop.
6. VERY IMPORTANT! - Ensure your device is connected properly to the PC/laptop.
7. Make sure the battery is charged to at least 50%.
8. Double-click on the .exe file to run the update utility.
9. Please close all programs on your PC/laptop when running the update utility.
10. VERY IMPORTANT! - Do not unplug the device when the update process is running, doing so may damage the device.
11. After updating, the device will reboot, this is normal.
12. After ROM code update, application installed from "Application Disc" will no longer exist. Please re-install from Disc and follow origin steps when you first use.
13. After ROM code update, please download and install Sprite Backup updated version 6.2 to backup data to the internal storage or a computer.
I haven't try it, will try when I got time.
Great info Studyliu, Yeah is there any mirror link? i check on HTC e-club, it hasn't there..
erwinpiero said:
Great info Studyliu, Yeah is there any mirror link? i check on HTC e-club, it hasn't there..
Click to expand...
Click to collapse
If you can check: http://www.asia.htc.com/HTC_HKEN/members/others.aspx
It is on the hongkong website
I download it from the offical website, and I upload to the rapidshare, check the link on the top.
Can someone please post a mirror.
AllTheWay said:
Can someone please post a mirror.
Click to expand...
Click to collapse
I second this. Please, a mirror...someone
mirror
http://asapload.com/193326
binny1007 said:
mirror
http://asapload.com/193326
Click to expand...
Click to collapse
thanx for alternative link
another mirror
posted at my blog:
http://kaiserroms.blogspot.com/
Another Mirror
New Official 6.1 Rom HTC_Asia_HK 3.34.721.2 WWE
http://www.mediafire.com/download.php?ggnmzywmt2l
Can anyone make HardSPL from this rom?????
mirror rapidshare:
http://rapidshare.com/files/157469239/Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.rar
add to first post if possible
Has anyone tried flashing this yet? I would like to give it a try, but I hate to be first.
Flashed HardSPL (Hard2) 3.29, changed Page Pool to 12 MB static, flashed.
1. Excellent voice quality and signal strength (due to radio probably)
2. Fast GPS fix ~30 from cold start (A-GPS enabled), <5 seconds when hot started (wow!)
3. Programs installed as usual - Voice Command insted of Voice Speed Dial
4. Speed - feels better than 3.29 or 3.28 ROM (which is very good).
5. Free RAM - low, very similar to 3.29 or 3.28 ROMs
GXMark 1529 (surely no 2D drivers )
After installing Directshow patches from lastest manilla GXMark jumped to 1592
THNX
ported the oemxip and OEM it is few new version like MMS now ....19 new registry settings new xip files and modules will see the stability .
radio gps fix UK not good slower then 1.59.42.15 will test further .
I have to say:
this and ported 19588 SYS is quite, quite fast
good work on this my friend
rdy2go said:
Flashed HardSPL (Hard2) 3.29, changed Page Pool to 12 MB static, flashed.
1. Excellent voice quality and signal strength (due to radio probably)
2. Fast GPS fix
3. Programs installed as usual - Voice Command insted of Voice Speed Dial
4. Speed - the same or better than 3.29 or 3.28 ROM (which is very good).
5. Free RAM - low, very similar to 3.29 or 3.28 ROMs
Click to expand...
Click to collapse
how long does it take to get a gps fix?
Stability... Performance..
I just flashed and let me say ... It is VERY VERY stable and fast. Not too many apps, you need to load your apps. I am very happy with performance and stability. GPS lock in less than 20 seconds. flash fast Internet access and streaming media is also stable. I am testing with adding TouchFlo; will report stability. I also added the 3D Drivers, but could not tell any Diff especially with GoogleMaps.
Great Find... Thanks..
hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback
wow, this week we've got a bunch of new chefs
congratulations mate
Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.
welcome new chef....
man am i glad i have a kaiser...
umm...maybe u should have reserved some posts?
vcespon said:
Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.
Click to expand...
Click to collapse
Because he take it and sharing for everyone,however....i think that is WM6.0.
this night I update all information.
the rom is wm6.1
I had a kaiser from 2 year...never tried a fast ROM like the mine! please verify if i do something wrong.
do you understand wath you must do for had my rom??
flash rom - flash radio - execute the file mattes1o.exe from kaiser
it's a "new" way to upgrade rom features without flash...
I'm here for all!
what exactly does mattes1o.exe do?
installs pharm Parn, lol kidding, Congrats dude on the first release
Peace,
Josh
mbarvian said:
what exactly does mattes1o.exe do?
Click to expand...
Click to collapse
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe
Andre_Santarell said:
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe
Click to expand...
Click to collapse
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?
You would un-install them like regular CABs I think. As in going to Start/Settings/System/Remove Programs.
mbarvian said:
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?
Click to expand...
Click to collapse
if I not include you can unistall programs as you want, and I can modify ROM without use the ROMkitchen
kaiserii101 said:
you would un-install them like regular cabs i think. As in going to start/settings/system/remove programs.
Click to expand...
Click to collapse
exactly...as you like!!
Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.
stylez said:
Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.
Click to expand...
Click to collapse
HI
I create a base ugly rom ultra light, then I modify all rom with programs and skins, I make a backup of my work with sbp backup 2.0 that create an .exe file.
then if you want my work you must flash my rom(ugly and light) and then run my backup file that automatically install all...YOU DON'T DO NOTTHING ELSE
Andre_Santarell said:
hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback
Click to expand...
Click to collapse
U telling me you can overclock the cpu?
apatcas said:
U telling me you can overclock the cpu?
Click to expand...
Click to collapse
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532
Andre_Santarell said:
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532
Click to expand...
Click to collapse
I thought this was debated before and concluded as making your Kaiser not very stable??
biscuits1978 said:
I thought this was debated before and concluded as making your Kaiser not very stable??
Click to expand...
Click to collapse
it was and i've tried it on MANY roms and can't tell it makes any difference other than taking up space
Hey....congrats!!!!!......um......anyone tried the new rom yet? And how's the speed?....fast I hope!!
H3r5
final version
Description:
Windows Mobile 6.1 (AKU 1.6.1) WWE and PLK
PagePool: 5,25 MB (3,5 MB is recommended, speed is similar, larger RAM).
Release date: 7/12/2010
Useful applications, without TouchFlo2D and HTC Home
G3 and G4 safe
Recommended RadioROM 2.61.11!
Screenshots:
[ 1 2 3 4 ]
Download
pass: Ham3r
________________________________________
Clean
final version
Description:
Windows Mobile 6.1 (AKU 1.6.1) WWE and PLK
PagePool: 5,25 MB (3,5 MB is recommended, speed is similar, larger RAM).
Release date: 8/17/2010
Clean
G3 and G4 safe
Recommended RadioROM 2.61.11!
Screenshots:
[ 1 2 3 ]
Download
pass: Ham3r
thanks H3r5
Hi Ham3r
What are the main changes comparing to H3R4?
speedy9 said:
Hi Ham3r
What are the main changes comparing to H3R4?
Click to expand...
Click to collapse
Unlocked Exteneded ROM, small fixes, larger RAM and other..
rom is good
but in your wwe version :-
-starts slow (may be)
-wifi is not working
i mean that when i tap from comm manager or even from setting section it does not starts !!!
any patch for it ? or solution?
I had the same problem here with WWE : wifi was not working. (solved see below)
I made it working only one time after a hard reset...
Then I reflashed radio with 2.61 :
http://rs223tg.rapidshare.com/files/155922498/3325703/Radios.rar
now wifi seems ok again, after reboot and shutdown.
I cross fingers !!!
And boot time is incredibly fast ...
Whats the password for the (Radios) rar
Dzięki za rom / Thanks for ROM
ps. pass for radios: xda
eljuggy said:
I had the same problem here with WWE : wifi was not working. (solved see below)
I made it working only one time after a hard reset...
Then I reflashed radio with 2.61 :
http://rs223tg.rapidshare.com/files/155922498/3325703/Radios.rar
now wifi seems ok again, after reboot and shutdown.
I cross fingers !!!
And boot time is incredibly fast ...
Click to expand...
Click to collapse
I repeat, recommended is 2.61 radio and 2.26 SPL
After testing final versions, i think: both versions aren't similar. So i release soon fixed versions.
These differences are very small, but it's very imporant for me. Old versions are stay good.
//EDIT: fixed versions are uploaded.
Ham3r said:
I repeat, recommended is 2.61 radio and 2.26 SPL
Click to expand...
Click to collapse
I use 2.69.11 radio and have never had trouble with WIFI or anything else on your ROMs. I want to keep mentioning CRACING's ROM in my signature because it is the best Wizard 6.5 ROM so far, but the fact is that I use your H3r5 final ROM on both of my phones now.
When I get bored I change the today screen.
HTC Home is simple, fast, reliable.
SPB Mobile Shell is more like Android, and I like it sometimes.
Manila2D 2 build 1919 (with weather updates on the flip clock like HTC Sense) is beautiful and actually runs well with this ROM.
But I get bored, as I said, and keep switching between them.
n2rjt said:
But I get bored, as I said, and keep switching between them.
Click to expand...
Click to collapse
Thanks for info about RadioROM.
n2rjt, in my opinion, the best is Manila2D v2 (looks nice, but runs slowly) and HomeScreen++ UI (very customizable interface, very light, o/c and other..)
Do you can post link to (for?) working Manila with weather on Home Tab?
I used a folder that I had downloaded in October 2009. I had named the folder "M2D wm6.5". Looking through my old posts, it looks like I got it from here, following a response to my question which was here.
With your ROM, I have just installed the "first" and "second" folders, and the geolocation weather worked beautifully, both from WIFI and cell towers. I installed all of these to internal memory. I think that earlier ROMs I had tried such as the MSD ROM lacked sufficient internal memory to install all of these.
The weather on the home tab worked without requiring a workaround. I was surprised but happy.
Hi, I just flashed your rom and the first time wifi worked but after that I can't make it work again. Wifi just won't start from communication manager. I have radio 2.61.11, I reflashed the same radio and it still doesn't work. I have a G4 wizard if that counts. How can I fix this?
Hi Ham3r,
I want to upgrade my Cingular 8125 unlocked to WM 6.1. Please can u tell me which rom should i use?
Regards
Pankaj
Testing...
Hi, I've just downloaded your rom and installing it
later I will tell you how did it work.
after 1 hard reset I made wifi work
up to now very fast rom
thanks!
Uploaded Clean ROMs based on H3r5, for users who don't like added programs
Flashed your HTC_Wizard_6.1_21042_WWE_Clean_by_Ham3r.zip today. works great, fast enough on boot, wifi also works. the only thing is that the comm manager placed in both programs and Settings->connections.
oh, and how use voice dial in here? cant find the option...
Everything else is ok, this is my favourite wm at this time )
Comm Manager is in connections and in programs. It's normal and good (you can set commmgr to any button). In pure WM commmgr is just in settings.
VoiceDial is deleted, there just standard WM apps (+ MMS, Java, Network Wizard and smartskeys). You can install whatever you like (VoiceDial or VoiceCommander). Of course, UC is included.
btw. i fixed my SD slot in Wizard!