Please help me out here... Got my new G4 Prophet screwed during upgrading... Now it can't boot up at all.. Bootloader is working tho, could somebody send me a SD dump image for G4 Prophet? Thanks a lot!!!
Anyone please help~~~ Thanks a lot!
leiz_ca said:
Anyone please help~~~ Thanks a lot!
Click to expand...
Click to collapse
why do you need an SD image, you can use a ROM updater to fix 95% of the problems
Thanks, Jesterz. You are right, I got it fixed an hour ago... here is the story, just in case it may help other people later.
Got my XDA Neo and it was in Chinese rom, which has Wi-fi disabled. So I tried to upgrade to AKU3.2. but there was an error, something like "Can't write" or similiar. Then cellphone just stop responsing. Tried soft-reset and hard-reset, both stopped at splash screen (where shows the version of IPL/SPL). Bootloader still working tho.
Then try to download some rom from xda-developers, especially that stopatbootloaderfix, but the updateutil just can't update it, report different types of error code. Others just complain no connection through activesync has been established. After trying for over 5 hours and got desperate, that was the moment I login here and ask for help.
Today I tried the stopatbootloaderfix again but this time with "Allow USB connection" disabled in ActiveSync... and it works! It successfully flashed the ROM and now I am running the new AKU2.3.1 rom!
Happy....
Same Prob
Hi, where i can find this stopatbootloaderfix?
Looks i have the same problem. my Prophet stays at the Splashscreen with IPL, SPL, GSM, OS :-(
OK, worked it out by pressing and holding the powerbutton while performing a softreset
leiz_ca said:
Thanks, Jesterz. You are right, I got it fixed an hour ago... here is the story, just in case it may help other people later.
Got my XDA Neo and it was in Chinese rom, which has Wi-fi disabled. So I tried to upgrade to AKU3.2. but there was an error, something like "Can't write" or similiar. Then cellphone just stop responsing. Tried soft-reset and hard-reset, both stopped at splash screen (where shows the version of IPL/SPL). Bootloader still working tho.
Then try to download some rom from xda-developers, especially that stopatbootloaderfix, but the updateutil just can't update it, report different types of error code. Others just complain no connection through activesync has been established. After trying for over 5 hours and got desperate, that was the moment I login here and ask for help.
Today I tried the stopatbootloaderfix again but this time with "Allow USB connection" disabled in ActiveSync... and it works! It successfully flashed the ROM and now I am running the new AKU2.3.1 rom!
Happy....
Click to expand...
Click to collapse
Are you telling me this solution is also for error 326? If so Darn!!!
Don't remember whether i had a Error 326 or not.. Sorry..
Related
As I am using XDAII for 2003se which is 2.0600WWE downloaded in this forum (http://forum.xda-developers.com/viewtopic.php?t=16880). The radio is 1.18 and the bootloader is 1.01. As I can upgrade my rom from 2003 to 2003se without any problem, I would like to upgrade it to WM5 in these few days.
However, I face some problems in my updating.
I have try XDA_WM2k5_2.01a64WWE, XDA_WM2k5_2.01a00WWE, however, I cannot search the phone network after upgrade rom. As I have read some posts before, I know that there may be my radio's problem, so I upgrade my radio also. I have try 1.17, 1.18, 1.08 with these rom. Unlucky, it also cannot search phone network.
So. for the only solution is get back 2003se with "Asia O2 Xda II WM 2003 SE Upgrade" in this forum. I can get my network back.
As the result, I would like to ask that what problem am I facing and what can I do? Is it the problem of bootloader ? or the problem of radio?
And also, there have "Asia upgrade" for WM5? It helps me a lot and I need not to afraid the networking problem.
Please help me. .
location?
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
yetdy said:
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
Click to expand...
Click to collapse
waht edition of active sync do you have? to get wm2005 to work it has to be active sync 4.0 or higher and for the newer roms you have to have AS 4.2 or equivalent beta versions
I come from Hong Kong
I am using 4.2 for sync
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
yetdy said:
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
Click to expand...
Click to collapse
hmmn...
you did not read thoroughly...
AS disappear normally...
are you using the hima no id dot exe?
visit the wiki :roll:
Jojo,
I tried installing the following files that I downloaded through this website:
HIM_3.00a.32_WM5_AKU_3_CLEAN
XDA_WM2k5_2.01a64WWE
WM2k5 3.00a64wwe
I understand that AS will disappear the same way as it does when I installed SE. However, what puzzles me is that all of these installers will inform me that there is an error and I could not proceed further with the installation. I even have to restart my laptop because AS couldn't communicate with my himalaya after my attempted installation.
Sorry I'm not well versed with computer language/jargons that's why I could not understand the readme file. I would really appreciate it if you could guide me. Thanks.
at last installed it! I have to re install though. I restored some of my data and it crashed on me.
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
CAn anyone tell me that , any version of WM5 is fit to Hong Kong User.
yetdy said:
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
Click to expand...
Click to collapse
high what network are you with and are you on contract or pay as you go?
cause i have the settings for o2 contract gprs and also havw the settings for e-mail etc
I'm now able to access my emails. however, MMS is still a problem. Still can't send or receive. I'm using a globe telecom postpaid line here in the philippines. I installed the attached file for the network configuration but still nothing.
Hi, I have strange problem. Somehow my WiFi on my SDA stop working, it want turn on.
When I checked with Wlan Uitility, phone gives me a "Driver is not loaded" message, when I click on WiFi in Comm Manager - nothing.
I'm using latest WM6 ROMs from this site, I even try with original WM5 T-mobile rom, still nothing.
Did I kill WiFi somehow ? Is this possible at all.
Radio: 4.1.13.28_02.61.01
RTL: 2.002
CE OS 5.2.1616 (18120.0.4.0)
Thanks
thats hapend with me to but isolved the problem by clear
storage this problem comes sometimes when you install a wifi software
bestever said:
thats hapend with me to but isolved the problem by clear
storage this problem comes sometimes when you install a wifi software
Click to expand...
Click to collapse
Well, I cleared it like 20 times in this process, that was the first thing I tried. And yeah, I gave the phone to kid for a few days, maybe 'little devil' installed something, but he wan't addmit
Any other solution? Can I dump somehow ROM from my working phone? Maybe that could help? And what is the software for that?
Thanks
Any one found the solution?
Best regards
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
i have a htc tytn2, no lock
its dutch, did the update from mobile 6 to 6.1, no problem
when i want to update with a different rom, (even hard spl tried it also)
i run the KaiserCustomRUU it works til i get the %, it stays at 0% and after a time i get an error 262 update error.
can somebody give info to update my radio, the original radio from htc is not good and when i am calling i have an echo.
total rom update even to English is no problem. but it wont update....
anybody?
mrijnvis said:
i have a htc tytn2, no lock
its dutch, did the update from mobile 6 to 6.1, no problem
when i want to update with a different rom, (even hard spl tried it also)
i run the KaiserCustomRUU it works til i get the %, it stays at 0% and after a time i get an error 262 update error.
can somebody give info to update my radio, the original radio from htc is not good and when i am calling i have an echo.
total rom update even to English is no problem. but it wont update....
anybody?
Click to expand...
Click to collapse
There are some ideas in here for getting past 262 errors: http://wiki.xda-developers.com/wiki/RUU_Errors
Ta
Dave
@ daveshaw
thanks, but after soft reset its starting up normaly, next update the same, always that fault...
nobody, any ideas??????
mrijnvis said:
nobody, any ideas??????
Click to expand...
Click to collapse
Try re-installing active sync and try again. Error 262 usually means that connectivity is lost between your USB and phone. Re-installing active sync might solve the issue.
Also try and do a forum search using the search option right at the top of the page using the key words "Error 262" you might get some more inputs on how to sort this.
I have an Qtek S100 and according to the imei check its an o2 rom.
After a long time i decided to use my qtek again just for fun and see what i can do with it.
In windows 2003se it keeps giving low battery although its connected to usb, anyway i decided to give it a go and installed wwe05 but totally forgot about the radio rom that needed to be 1.12. (it was 1.13).
So it gave "bad radio" during startup.
I tried to flash it with multiple radio roms, including the original o2 one, but some dont start at all and some keep getting stuck at 45%.
and eventually give error 114, i can flash it back to original rom, but as soon as i want to update the radio, same thing happens.
now it gives "no radio" in wwe05, and after flashing back to 2003se it says "no gsm".
the radio wasn't giving any error/problem before i decided to update the os, so i doubt it's an hardware issue. i checked mutiple threads about 114 radio, but haven't found a sollution yet.
maybe somebody here can help me get my radio back.
You should read this Thread first http://forum.xda-developers.com/showthread.php?t=705702. Maybe there is the Solution.
i tried them all with normal usb flash, they all stop at 45% and give error 114.
Next Idea is here : http://forum.xda-developers.com/showthread.php?t=494635&page=2
Dont use a USB HUb !
k, i charged battery as long as possible, (althought i think its nearly dead) it now shows 100%.
I'm also using a different system now with windows 7,, when trying to flash it doesn't give an error, but after a few seconds its shows "congratulations", but it hasn't done a thing....
i can only try a windows xp in vmware, will try next first.
nvm, tried multiple roms, guess one of them changed my bl, cause its showed version 1.5.0 when its needs to be 1.00 or 1.02, so i tried to update my bootloader with pnewbootloader and version 1.02.nb0 and it resulted in an error ITFlashRom and never came back to the living. no boot no bootloader. paperweight is going in the bin. topic can be closed.