Hi, guys, has anyone tried to do the SIM unlock AND CID unlock with your prophet through http://www.imei-check.co.uk/?
Some guys from wizard forum did unlock from that website. And I just got confirmed by an email from http://www.imei-check.co.uk/, read as following,
------------------
Hello,
our service will remove SIM and CID lock from ANY device with ANY firmware and ANY chipset (G3 and G4). After unlocking you can use ANY SIM card and you can flash ANY compatible HTC standard firmware (2.xxxx in your case).
To unlock XDA Neo just follow the XDA Neo unlock link:
http://www.imei-check.co.uk/m600unlock.php
Regards,
IMEI-CHECK Team
---------------------
Since my device is a G4, and it is impossible to unlock it by any other free solutions. So, I am wondering if I should give it a try with this website?
Actually, I have no problem upgrading to other ROM (like the recent QTEK WWE) with no-vendor ID RUU. But every time when I wanted to try a new ROM, I was kind of nervous and was afriad to brick my phone. CID unlock will certainly ease my mind and give me advantages and brave to try more ROMs.
I am sure a free solution for this is on its way and won't take long.
I can use my prophet with different operators. This means that my pda' s sim is unlocked! How can i know that my pda's CID is unlocked?
If you have a G4 (ipl ending with .0001) then it's not unlocked. (sim lock is not cid lock as you probably already figured hehe )
If you have a G3 however it's probably not unlocked too, but you have check the wiki how to unlock it. Maybe there is some infor there too how to check if it's unlocked yes or no? Since I have a G4 I don't know that
Back on topic, I dunno if it's worth the money to CID unlock a phone there. It could be handy if you do a lot of upgrading and want to downgrade or anything.
But as said, people are already busy with a free solution to CID unlock a G4, cause if they can do it we should be able to get around it too
It writes IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.4.30
ıs it G4 or G3?
sonsayko said:
It writes IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.4.30
ıs it G4 or G3?
Click to expand...
Click to collapse
G3, I guess. Good luck.
RaptorRVL said:
....
Back on topic, I dunno if it's worth the money to CID unlock a phone there. It could be handy if you do a lot of upgrading and want to downgrade or anything.
But as said, people are already busy with a free solution to CID unlock a G4, cause if they can do it we should be able to get around it too
Click to expand...
Click to collapse
I guess you are right. But do you know if people are still working on G4 unlocking? It's been a long time. I thought they have given up already.
Well, I have absolutely no idea to be honest But I just assume they do since it's pretty important with all the rom upgrading going around.
It would be perfect if you upgrade with a not so good rom etc and I guess developers of homecooked roms would like it too.
Actually, I have no problem upgrading to other ROM (like the recent QTEK WWE) with no-vendor ID RUU.
Click to expand...
Click to collapse
Could you give some more info on how to do that or post a link? I have a G4 Prohphet and couldn't upgrade to QTEK WWE ROM. Thanks!
Alfa145qv said:
Could you give some more info on how to do that or post a link? I have a G4 Prohphet and couldn't upgrade to QTEK WWE ROM. Thanks!
Click to expand...
Click to collapse
The protocol was proposed by Looking Glass, so, all the credits should go to him. I modified a little bit based on his procedure as following,
- Decompress and run the exe file (RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship.exe). Don't close your grey installing window.
- Locate the just created temporary directory, something like:
C:\Documents and settings\username\local settings\temp\rarXX , or pftxx or the like (look by time/date, it's, something created one minute before your current time)
- Copy the full directory and contents to somewhere else in your PC.
- Close the still opened grey window
- get ROMUpdateUtility_NoID.exe from the forum, and copy to the directory you just moved to your pc (You can get it from the ftp). Copy the ROMUpdateUtility_NoID.exe to your "new" directory, replace the original ROMUpdateUtility.exe.
- from this "new" directory you copied in your PC, execute ROMUpdateUtility_NoID.exe
That's it. Simple and easy.
Related
Hi, I was testing and mixing some new and old ROM's but now I can not fix the IPL, I mean, I wanto to go back to 2.15.0000 - G3, or 2.15.0001 - G4, at these moment I have the 1.0. Now I'm totally lost, give me a hand to fix these problem who is going to make me crazy.
My device is CID unlock.
Hi, I am just curious, how did you CID unlock your prophet? Mine is a G4 device. I have tried a while, but could not find a solution to downgrade and CID unlock it.
Thanks.
coolfire74 said:
Hi, I am just curious, how did you CID unlock your prophet? Mine is a G4 device. I have tried a while, but could not find a solution to downgrade and CID unlock it.
Thanks.
Click to expand...
Click to collapse
If you want to CID unlock your device, you must visit the Wiki, there you will find many tools that allow you to unlock your device. Here can you get more information abaout how, in only 10 steps: http://wiki.xda-developers.com/index.php?pagename=Prophet_Upgrades
In the Wiki place, can you leran more about your device.
I'm looking to reach the G4 chip but I can't. I tryed many, many times, but no way.
Hope that I can solution your curious.
Regards,
cidriver said:
If you want to CID unlock your device, you must visit the Wiki, there you will find many tools that allow you to unlock your device. Here can you get more information abaout how, in only 10 steps: http://wiki.xda-developers.com/index.php?pagename=Prophet_Upgrades
In the Wiki place, can you leran more about your device.
I'm looking to reach the G4 chip but I can't. I tryed many, many times, but no way.
Hope that I can solution your curious.
Regards,
Click to expand...
Click to collapse
Thanks for the reply. Yes, I checked the Wiki, but there is no solution for G4.
cidriver said:
Hi, I was testing and mixing some new and old ROM's but now I can not fix the IPL, I mean, I wanto to go back to 2.15.0000 - G3, or 2.15.0001 - G4, at these moment I have the 1.0. Now I'm totally lost, give me a hand to fix these problem who is going to make me crazy.
My device is CID unlock.
Click to expand...
Click to collapse
Your device is with the G3 there is no way you can get 2.15.0001 that is for device with G4 chip.
As for the IPL in version 1.0 it is fine, you do not need anything higher than version 1.0 to use any of the rom available for G3 chip. IPL will be upgraded if is available from any official rom. It does not enchance any function you get from using any rom available here.
Thank you very much, I'll try to upgrade to the new AKU3.2 and then let me tell you my impresions.
Once again, thank you!
I have a G4 device with WM6 PDAVIET which is the latest IPL i can get?
thanks!
I followed Dr. Puttingham's thread and Yippie's thread to a tee in addition to reading threads in this forum for a good number of hours each day for two weeks. Yesterday, I became brave enough to downgrade my 2.26 Ipl / 2.26 spl; GSM 2.25.11; OS 2.26.10.2 MDA with a goal to upgrade to a custom WM6 rom with touchflo.
* Started with flashing the button rom then cid unlock with lockwiz2b which looked successful no errors but got a 1.xx IPL / 2.26 SPL since I got a 2.26 SPL then
* flashed the wizard love rom then then cid unlock with lockwiz2b which looked successful also but got the same results - a1.xx IPL / 2.26 SPL again then
* flashed the 2.26 T-mobile rom from the Tmobile website then
* flashed NBD 8.3 only to go back to Tmobile's 2.26 rom - DISAPPOINTED after two hours...............
Any assistance would be appreciated without bricking my MDA. Also, I read the thread on how to install a 2.x rom in a cid locked G3, this method appears a little bid complicated and if I need to move forward with this method, would this method work for any WM6 rom with touchflo and if somebody could simplify the method in layman's terms for newbie's like me could understand, please advice.
Let me know if I missed anything in the process.
Thanks, Technobuff
After u do cid unluck and sim unluck and its reboots do a downgrade again to the button rom and ur ipl and spl will change.(u do not have to re-due the onlucking procedure again)
I tried again performing Dr. Puttingham's CID unlocking process in terms of flashing the button rom then the CID unlock process using Lokowiz2b but while I am at the DOS screen trying to CID unlock my MDA it the DOS screen showed unlocking phone........DO NOT DISCONNECT UNTIL THE PHONE REBBOTS.
This process went on for 5 then 10 then past 30 minutes until I gave up. To be on the safe side I turned off the LAPTOP by taking the battery then pulled the USB cable from the PC to the MDA.
What is the typical timeframe for the unit to CID unlock? Why is is it hanging? Am I missing or skipping the process? How can I complete the process?
Any help would ber greatly appreciated by newbies who read threads.
Technobuff
The problem is that you need to have an IPL/SPL of 1.xx before you try to unlock your phone. CID unlocking will not change your SPL which means that you had an IPL of 1.xx and an SPL of 2.26 before you even tried to unlock. You need to reflash the button ROM over and over until your IPL and SPL both show 1.xx and then run lokiwiz.
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
unlock problem
if your device doesn't reboot almost at once after the unlock, it probably didn't work. That is what happened to me. Did you get four lines of File cannot be opened or a similar message? I got that from following the 17 steps carefully. What was wrong for me was unzipping to the root directory of C:/. When I redid it to the desktop and executed from there, no problemo.
Your symptoms sound exactly like mine. I posted a longer thread, somewhere....
LH
Ok i did a little booboo and yesterday was using equinoxe's softspl tool by mistake (didn't notice i had a g3), this causes you to actually end up with the exact same os you had before you flashed.
The best advice I can give: Open the Dr's guide and follow every step closely. (also just found this guide. Its a bit simpler http://forum.xda-developers.com/showthread.php?t=305225)
Once you CID unlock you should be able to use the RUUs to flash.
Make sure everytime you do any of the steps that dr. putt gives to be comepletely synced to activesync.
Also dont forget to load enablerapi.cab on your wizard.
Also you must use the unlock function before the cid unlock function in lokiwiz.
OH also the unlock will work after your ipl drops to 1.xx After you do the unlocks reflash button to drop the spl to 1.xx Then just flash up to a higher IPL/SPL as the Dr states.
If it seems unorganized im sorry =P
4irm said:
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
Click to expand...
Click to collapse
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
slod said:
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
Click to expand...
Click to collapse
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
thanks. helps me to learn stuff.
CID???
how wil i know if my fone mda vario is CID unlocked?
it is now installed with t-mobile 2.26 ROM
thanks.
rizortiz
famewolf said:
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
Click to expand...
Click to collapse
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
4irm said:
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
Click to expand...
Click to collapse
Perhaps they want it actually cid unlocked for resale value...or perhaps they prefer the RUU method of installs vs having to use shelltool.
Just so I don't get flamed to bad for asking a what some would consider a simple question, I had an 8525 that I made SuperCID and HardSPL, so I have done this before. I have also read the majority of material in the wiki and the forums on what I would like to do.
So here goes,
I just purchased the Tilt and am looking to do the same. It is stock to the block right now.
ROM 1.62.502.0
Radio 1.27.14.09
Protocol 22.45.88.07H
My question is what is the sequence of events that I need to do in order to get my phone SuperCID and HardSPL to the point I can start using some of these wonderful 6.1 ROMS?
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
Now what SuperCID? I found 2, here http://forum.xda-developers.com/showthread.php?t=361236 and here http://forum.xda-developers.com/showthread.php?t=375583
Any guidance would be very appreciated.
Thanks for your help
JD
The hardSPL depends on the ROM you're going to flash. Some ROMs work better with certain SPLs. Check.
For ease of mind, hardSPL first then security unlock. You can't go wrong in that order.
JudgeDredd67 said:
Just so I don't get flamed to bad for asking a what some would consider a simple question, I had an 8525 that I made SuperCID and HardSPL, so I have done this before. I have also read the majority of material in the wiki and the forums on what I would like to do.
So here goes,
I just purchased the Tilt and am looking to do the same. It is stock to the block right now.
ROM 1.62.502.0
Radio 1.27.14.09
Protocol 22.45.88.07H
My question is what is the sequence of events that I need to do in order to get my phone SuperCID and HardSPL to the point I can start using some of these wonderful 6.1 ROMS?
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
Now what SuperCID? I found 2, here http://forum.xda-developers.com/showthread.php?t=361236 and here http://forum.xda-developers.com/showthread.php?t=375583
Any guidance would be very appreciated.
Thanks for your help
JD
Click to expand...
Click to collapse
Ok, so I don't know about the super cid process but here's at least how you can start the journey:
Copy KAIS_SSPL onto your device
take out sim card and SD card
run KAIS_SSPL
Unplug USB wait 5 -15 seconds, plug in.
Run the Hard_SPL of your choice depending on your ROM choice. Seems like the ones out there are using 3.56, but it varies
Make sure to also flash a compatible radio!
Viola! you are done and ready to flash a ROM!
JudgeDredd67 said:
J
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
JD
Click to expand...
Click to collapse
1.) Flash 1.1JockyW HardSPL
2.) Using Jockys SuperCID process security unlock your device.
3.) Flash to any other HardSPL
4.) Flash the ROM of your choice.
Thank you all for your comments. I feel a lot better going into this now.
Noob question sorry. Sequence of events....
Appologies in advance as this is obviously a nooby question....
I have just aquired a t-Mobile branded MDA Vario III. I want to CID/SIM Unlock it as well as Hard-SPL it so I can install whatever ROMs I would like.
I previously had a HTC Wizard that I CID & SIM unlocked with the Lociwiz tool, however I had to downgrade the IPL/SPL to version 1.x to get this to work. Once it was unlocked I was able to install any ROM. I am looking for a similar thing with my new Kaiser and I can't find a Wiki or guide explaining the steps. It seems there are 1.x HardSPL's as well as Security unlockers, plus 3.x HardSPLs but no definitive guide as to the correct sequence.
1. I want to unlock the phone so I can use any SIM
2. I want to unlock the phone so I can install any ROM
With the Wizard I had to downgrade IPL/SPL run the Lokiwiz tool and the upgrade to whatever I wanted. How do I do the same with the Kaiser?
Sorry....
Andy
ADB100 said:
Appologies in advance as this is obviously a nooby question....
I have just aquired a t-Mobile branded MDA Vario III. I want to CID/SIM Unlock it as well as Hard-SPL it so I can install whatever ROMs I would like.
I previously had a HTC Wizard that I CID & SIM unlocked with the Lociwiz tool, however I had to downgrade the IPL/SPL to version 1.x to get this to work. Once it was unlocked I was able to install any ROM. I am looking for a similar thing with my new Kaiser and I can't find a Wiki or guide explaining the steps. It seems there are 1.x HardSPL's as well as Security unlockers, plus 3.x HardSPLs but no definitive guide as to the correct sequence.
1. I want to unlock the phone so I can use any SIM
2. I want to unlock the phone so I can install any ROM
With the Wizard I had to downgrade IPL/SPL run the Lokiwiz tool and the upgrade to whatever I wanted. How do I do the same with the Kaiser?
Sorry....
Andy
Click to expand...
Click to collapse
Since you are a Senior Member, you should already know the first rule is to search before creating new threads. However, since I am in a good mood from starting my new job this week, I will "help" you out. Check out the threads below, and after some in-depth reading, all of your question will be answered.
HardSPL: http://forum.xda-developers.com/showthread.php?t=334679
Sim Unlock: http://forum.xda-developers.com/showthread.php?t=361039
Now here is your nickels worth of free advice: Do NOT attempt to run the SIM Unlocker with a WM 6.1 ROM or the 3.xx HardSPL installed.
Closing this thread so it can fade away....
So I have followed the guides, two of them conflicting each other (one tells me Wizard Love while other says Button)
So I pick wizard love because I did the factory update a few years back to 2.25
use loki3
run tmobile 2.26 and it fails
run the 3.08 and it works
try to install TNT roms... all get stuck at 99% except one but the rom doesn't work because I am still on windows 5.1
Now on my third attempt it gets stuck at bootloader. Can't get the phone to turn back on to normal mode just to use it and forget about trying these roms
Any ideas?
Got button to work some how
Now I am at IPL 1.01 and SPL 3.08
Hopefully I can redo everything and get 6.1 to work
It tells me my CID/SIM but no where does anyone tell me where I need to insert this ID code at.
ID code? What do you mean by that?
I ment CID, it was telling me the CID like if I needed to enter some sort of menu and run it
Running t-mobile rom again, hopefully this works
You sure that it wasnt asking for a SIM unlock code? OR was it giving you a "data crashes" message?
Nope neither of those.
Anyways
Tmobile screen pops up now with 2.26/2.26
In regards to installing new roms, do I just launch ROMUpdateUtility or Do I need to do a CID unlock again?
Also saw there is 3.08/3.08 available, Update before or after upgrading the wm6.1 rom?
Well, lemme ask you this, what is your device? Is it a G3 or a G4, if G3, then sure, update your IPL/SPL after you upgrade. If it is a G4 however, FOR THE LOVE OF TUNA DO NOT upgrade your IPL/SPL or you will have a brick on your hands. And also, if you have used HardSPL, then no, you do not have to CID unlock your device again. Personally, I just use the SoftSPL method each time I load a ROM. If your device is a G4, I have made a guide in the G4 section that should help you. Its got screenshots and such aswell.
G3
Yay somehow it worked this time, 6.1 is nice
I did softspl
3.08 worth it?
If you device is G3 - FORGET HARDSPL
You mention that you have IPL 1.xx and SPL 3.xx
get WST - Wizard Service Tool and follow the instructions to cid unlock you device, unfortunately you cannot unlock your SIM with the SPl that you have for now
After that flash a carrier ROm to align your IPL/SPL to 2.xx
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Ok, you have a G3 device
Get WST: http://forum.xda-developers.com/showthread.php?t=329170
Install in your PC (XP not Vista), check the situation about your CID and SIM
If you have CID unlock = SUpercid you can flash any ROm you want, if not you must downgrade to IPL/SPL 1.xx (Button Rom)
WST Unlock only works with IPL/SPL 1.xx
Note that SIM can only be unlocked with your SPL as 1.xx
go on run, type msconfig and open that, close all microsoft services and install,
Ckamc said:
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Click to expand...
Click to collapse
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
HAHAHAHA
S.V.I said:
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
Click to expand...
Click to collapse
You know when an oportunittie comes huh!
I can buy it too but its more glad to see a wizard function well with 6.1
hope you can unlock and upgrade... if not... READ a lot.
Losing Mind (again)
OK, here we go.
First off, I am in no way new to Flashing or the logistics behind it. I am sure this is just something that I cant find by searching. But my problem is this.
I have a G3 TMOBILE USA MDA (Wizard). I have used the lokiwiz2 unlock software several times and according to the program I am SUPERCID unlocked. I am able to flash ROMS all day long. I get no error about loading. What is happening is that I almost always end up with the same default ROM after the FLASH is completed. I am now sitting with the Button ROM on the unit. I assume if the Button ROM loads, then I should be CID Unlocked otr it would not load (or is this my mistake in thinking?)
As my MDA sits now, I have the Beer Mug Displayed, IPL 1.05
SPL 2.26 GSM 01.12.10 OS 1.5.4.2
Now, if I go and try to Flash to one of the Two ROMS I want to go to
TMOUS_MDA_5.2.1629_Wing_Port_1.1 (Boring ROM) or I try with SNN 3.1 it will run the procedure perfectly, and I will end up with a Barebones version of Windows Mobile 5.0. This is wild.
Has anyone seen this happen and is laughing and going "Been there, here is the problem,,) or do I need to discuss this in more detail.
Im wondering if the ROM Upgrade Software is grabbing a ROM from elsewhere on my Hard Drive and is installing it from cache or something like that. Is there another version of the OS Upgrader that allows me to tell it exactly what ROM I want installed, instead of just installing whatever it wants.
Thanks for the help, after two days of searching and looking around, I can deal with amteur hour emabreesment, just HELP!!
My xv6800 and my 8125 was a breeze compared to this nitemare. (BTW, I also flashed this 2 years ago with the TMOBILE USA Official Release, no issue)
wyreless
Well,these are symptoms of CID not unlocked.Button's Rom flashed doesn't mean its CID unlocked,its a patched IPL/SPL rom simply to downgrade to IPL/SPL 1.xx for CID unlocking.
Simply,download WST_4.2.2 and run it to verify the CID lock/unlock status of the phone and do the right thing onwards.
Thank You Zabardast for the quick and to the point answer.
I was thinking in the back of my head it was a CID issue. It was just that everything seemed to be "moving right along". I sthere an easier or better Unlocking soiftware then lokwhiz for the Wizard Series, specifically my USA Tmobile MDA?
Well,if you have Button's Rom running successfully,so its IPL/SPL must be 1.xx already,there shudn't be any problem to use lokiwiz02b to CID unlock the phone,you can even use WST_4.2.2 tool also to easily CID unlock the phone.
There's no other method known to get CID unlocked a wizard freely,unless you are ready to pay to IMEI company to get a unlock code
hey alll..ok i screwed up
i downloaded Charecters ROM..i used WST and it showed that my device is G3 and its CID locked..well i just started the Flashing and it stuck at 99%
now it wont load any ROM and just as i came from school..its not evening starting..its not evening charging..please help any one
for one to flash a rom you must CID unlock it first...
What's wrong? I've tried different update files but they don't work
Please help,
I think I already wrote this on a wrong place!
Just to be sure, do you have a Kaiser?
Do you have HardSPL installed?
Follow these steps for ROM upgrading: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
DaveShaw said:
Just to be sure, do you have a Kaiser?
Do you have HardSPL installed?
Follow these steps for ROM upgrading: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
Click to expand...
Click to collapse
Thanks Dave,
In three color screen it says KSIS130 and then SPL_1.93.000, CPLD-8
In fact It's not a locked phone that belongs to any provider! How come I should Install another SPL?
mehrdadr said:
Thanks Dave,
In three color screen it says KSIS130 and then SPL_1.93.000, CPLD-8
In fact It's not a locked phone that belongs to any provider! How come I should Install another SPL?
Click to expand...
Click to collapse
Had to ask about the Kaiser, had someone with a Treo trying to use Kaiser Hard SPL the other day
You need to Flash one of the hard SPLs before you can flash ROM's from another carrier. The Hard Spls have the CID (carrier ID) check removed which allows this.
Thanks
Dave
DaveShaw said:
Had to ask about the Kaiser, had someone with a Treo trying to use Kaiser Hard SPL the other day
You need to Flash one of the hard SPLs before you can flash ROM's from another carrier. The Hard Spls have the CID (carrier ID) check removed which allows this.
Thanks
Dave
Click to expand...
Click to collapse
What I don't understand is that why my phone is locked? I first tried the HTC website update file, the some others from the links of XDA.
Sorry for stupid questions, I'm not really familiar with all these locking and bought my phone supposed to be without any lock! Could this be the agent of HTC desire?
mehrdadr said:
What I don't understand is that why my phone is locked? I first tried the HTC website update file, the some others from the links of XDA.
Sorry for stupid questions, I'm not really familiar with all these locking and bought my phone supposed to be without any lock! Could this be the agent of HTC desire?
Click to expand...
Click to collapse
All phones come CID locked, even the HTC ones, it means you can only flash ROM's made by the same manufacturer as the phone.
Your phone will probably be SIM unlocked meaning you can use any SIM card you like, but to flash a ROM with a different CID isn't possible without Hard SPL.
Ta
Dave
DaveShaw said:
All phones come CID locked, even the HTC ones, it means you can only flash ROM's made by the same manufacturer as the phone.
Your phone will probably be SIM unlocked meaning you can use any SIM card you like, but to flash a ROM with a different CID isn't possible without Hard SPL.
Ta
Dave
Click to expand...
Click to collapse
So the one I downloaded from their website must work right?
Yes it's SIM unlocked and works with everything.
I'm still looking for a proper time so that I can start operation on my phone! the big surgery
mehrdadr said:
So the one I downloaded from their website must work right?
Yes it's SIM unlocked and works with everything.
I'm still looking for a proper time so that I can start operation on my phone! the big surgery
Click to expand...
Click to collapse
Should do ...
Ta
Dave
Now confision,
It's just due to the low IQ I know
In fact I read different explanation for SPL and found that after I start with SSPL-KAIS.exe then I'll need to have the hard SPL.
What If I want one of the original ROMs from http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Do I need to extract the SPL from one of the original files on the mentioned link? If not Which hard SPL?
And then can I just run one of the WWE shipped .exe files or again the new ROM file must be extracted and being installed?
thanks
mehrdadr said:
It's just due to the low IQ I know
In fact I read different explanation for SPL and found that after I start with SSPL-KAIS.exe then I'll need to have the hard SPL.
What If I want one of the original ROMs from http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Do I need to extract the SPL from one of the original files on the mentioned link? If not Which hard SPL?
And then can I just run one of the WWE shipped .exe files or again the new ROM file must be extracted and being installed?
thanks
Click to expand...
Click to collapse
Actually, you dont need to do HardSPL or CID unlock for ROM upgrading,.
Those thing are used to make a smoother ROM (remove white screen, freeze, etc),.
When i have my TyTN at the second day, i flash to WM.6, and all works well,.
Make sure that you have download Kaiser ROM,.
make sure you dont have any corrupted download,.
ps: until now, my TyTN never been CID Unlocked,.
Garmin said:
Actually, you dont need to do HardSPL or CID unlock for ROM upgrading,.
Those thing are used to make a smoother ROM (remove white screen, freeze, etc),.
When i have my TyTN at the second day, i flash to WM.6, and all works well,.
Make sure that you have download Kaiser ROM,.
make sure you dont have any corrupted download,.
ps: until now, my TyTN never been CID Unlocked,.
Click to expand...
Click to collapse
No I'm even more and worse confused!!! I think Dave says that I need to Unlock the CID. However in some of the articles I think I read that to.
By the way none of the files I downloaded worked on my phone. Really I tried several, either from the HTC website or from XDA but same Invalid Vender ID comes to the PC displaye
mehrdadr said:
No I'm even more and worse confused!!! I think Dave says that I need to Unlock the CID. However in some of the articles I think I read that to.
By the way none of the files I downloaded worked on my phone. Really I tried several, either from the HTC website or from XDA but same Invalid Vender ID comes to the PC displaye
Click to expand...
Click to collapse
Just flash one of the hard SPL 3.* by Jockyw2001 and all should be OK.
Ta
Dave.