I got Jam and running 1.12.00 WWE ROM and 1.12.10 Radio 1.12.128 ExtROM . Last weeks i have tried to install BRS and i have succeeded but after a while i decided to original shipped ROM ( mentioned above ). Right after all these changings, my device started to fail getting SMS messages ( but sending without any problem ), i think while these tunings something went wrong or something and it caused this problem ( certainly its not about my SIM card or of its settings ). So here is my question : i wanna upgrade my device to the newest shipped ROM as well as the newest Radio vers. , in order to fulfill my aim what files ( i mean which ROM and Radio version and other needed apps etc. ) do i have to have and may i get them from xda ftp ? And my last request from you dear Masters, can this upgrade manage to solve my SMS problem ? This situation is getting very important for me day by day, its itching my brain every moment.
i dont think your sms problem is caused by the ROM. i did use 1.12, and had no sms problem like yours. now im using 1.13 rom and radio (but no ext rom), which i believe are the latest for magician at the moment. find them on the FTP. thanks
O2 Settings
Hi,
I've just upgraded to the O2 Big Storage Rom (WWE_O2_1.12.00.zip from the FTP), I was expecting (probably naiively) to have all the O2 settings etc to be installed as well.
There's no O2 customisation whatsoever and I don't even have the option for MMS in my messaging Folder.
Is there any way to just get the latest O2 Mini Rom?
Or to at least get the settings - i'm assuming that they all come from the extended rom? If so, how should I go about installing that?
I have searched and there's so much going on, it all gets a bit daunting.
Thank you for your help in advance
C
My Dopod 577W wifi is not working (could not locate any network even though I know it exist) after upgrading the ROM (2.0.11.0) and Radio (02.61.01). The worst thing is that it also didn't work even I tried to flash it back to the previous version.
Please help.
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Hi there, I was given a link and downloaded the ROM and a radio for my 3 mobile so that I can get it back to the original state when I boughts the phone as 3 will not repair my phone if it has flashed.
I got both of the files (ROM & Radio) but I am unsure of how I add the radio. Do I do that AFTER I have flashed the ROM or before?
Also the number of the firmware on my sons HTC Kaiser is 2.50.771.0 (which is still in its original state from 3) but the link I downloaded is showing as version 1.00.000.0 will this be ok for me to put back on or has anyone who used this can clarify whether it will put my phone back to the original setting with the 3 logo on start up and Planet 3 sign in icon back onto my phone.
Thanks for your help guyz brilliant site and keep up the good work.
Razor
This thread will help http://forum.xda-developers.com/showthread.php?t=335568
Can't answer the firmware question though, sorry.
Good luck.
My phone currently has the latest Vodafone G930FXXU2DRB6 firmware dated 04/03/2018. I want to install the latest 02 firmware G930FXXS1DRA5, build date 29/01/2018.
I've read online that you can run into problems flashing a firmware with an older build date, is this so?
Before you ask, I want to use 02's WiFi calling feature but you need to have an 02 firmware to activate this feature.
Normally I would just go ahead and do it but it's taken me over a week to actually get the phone up and running.
I factory reset it in recovery when I purchased it as the previous owner could not remember her google password, I then ran into the FRP issue.
In the end I had to get her to supply me with the original purchase receipt and go to a Samsung service center to get it working.
Can this be done in Odin & am I likely to run into any problems along the way?
No one...!