Hi
Some help please, I have a xda 2, tom tom navigations software and a haicom 204e gps, i can not get the tom tom navigator to see the gps unit i have all the leads and the red led stays on i tried the gps on a laptop with a usb cable works fine, i don,t know which port to connect to ie com 1, 4, 5 etc and which things in the xda to turn on or off, as you can see i am a beginner to this, thanks for any help!!!!!
Onesongrg
Go to settings/connections/beams and uncheck the box, in tomtom choose com 1, nmea 4800.
Thanks mate worked a treat!!!!! :lol: :lol: :lol:
SameProblem?!
Hello!
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
I've an Haicom HI-202E GPS-Mouse,
the MDA II :wink:
a soldering iron...
and a 5V Powersupply in my adapter (consists of 2 USB ports connected to each other, powersupplied with an 7805 (2A))
How can i fix it?
Thanks!
Re: SameProblem?!
Nobody0815 said:
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
Click to expand...
Click to collapse
I'm not 100% sure, but i think, that wouldn't work.
The USB Specifications says that USB requires one master device to controll the slave devices. Your PC is the master device and the mda is just an slave. You won't be able to get 2 slaves talking to each other without a master.....
Stefan
cant the MDA work as an Master?
I've heard it so. But I'm not shure.
Some people gets a external HDD working on other PDA's.
I'll look and think about, but i've never found anithing an web for thet problem/solution. :roll:
I've wondered that nobody wants to connect more on the PDA...
I mean 20Gig HDD may be nice in Holliday to listen music :wink:
the tomtom software for PPC's will enable under "GPS-status - GPS" the options to select a protocol/GPS-Mouse and the connection:
Ir
BT on com6
serial on com1
com9
.
.
Serial on USB
Bluetooth GPS
so, i thought it will
Thanks for more...
Found this in another thread:
Julian Thompson said:
Yes, this is right. The XDA2 won't function as a USB host. You do need that backpack and a www.ratocsystems.com host card. Then it will work.
I know this becuase I'm trying to link mine up to a HDD to store loads of music in my car and use the PPC as a controller but I don't want the confounded backpack - for you though on the motorbike, only using it when you need it it sounds perfect.
Click to expand...
Click to collapse
and you can also take a look at this long thread:
http://forum.xda-developers.com/viewtopic.php?t=8799
Stefan
Hi
I have an xda 1 & am trying to get the gps to work. I have a Haicom hi204s gps receiver & a (ic-xda-ht for 02 xda tmoble ) cable for the car.
The software I am using is tom tom 3 ver 3.02
I have turned the beam off
My settings for the gps page are Haicom GPS + com1
I am at a loss !!
Rgds
Tan
@nobody: THE MDA can ony act as slave.
BUT: For GPS you ony need a serial port. And after all USB IS a serial type of port.
Only thing you need to do is solder a cable that connects the +5v, ground, Tx and Rx of the GPS USB connector to the appropiate pins of the MDA connector . . . .
On one of the german forums (cant remember the name :-( )there is a memeber nicked 'mocki' that offers custom built cables.
Tanman, choose nmea 4800 and com 1. Make sure beams are off and also that you dont have a keyboard driver loaded. Go to the gps screen in tomtom and see if there is any bars showing for satellites. If this doesnt work or gives an error let me know.
Hi cruisin-thru
Worked a treat
what I could not find at first was 'nmea 4800' which was the name of the sat receiver
Nice one thanx a lot
Tan
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
cruisin-thru said:
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
Click to expand...
Click to collapse
:?: :?:
So what you're saying is that, asl ong as the hardware is compatible with NMEA, we can use this generic driver with the correct baud spreed ?
Yes
hi.are not native English ,and I have a problem with my HP 614c. broke the button that locks the battery coversilver next to the symbol written wifi and bluetooth.I would buy the part on the internet to help me find the specific name?
I need to establish the JTAG pins for a X8.
Attached image contains my deduction so far..
starting from a commercial JTAG adapter for X8 + a picture of a JTAG connection imporvisation -> i've deduced which are the 8 JTAG pins (image #4)
But before i start some serious soldering.. i need to know which cable goes where.
I have a RiffBox & picture #5 explains the Riff JTAG pinout.
I've marked the pins of interrest with letters from a->h (they are 8).
Please help me establish which pin is which & include in answer a formula like: a=1, b=12, etc.. so that it will be clear,
Guys i need usb jig for my gear s3 any one provide me link of it so i can buy
You checked this Thread?
Service Manuals and USB Pinouts etc. inside:
https://forum.xda-developers.com/gear-s3/how-to/gear-s3-android-wear-port-wip-t3584588
Here is also USB Pinout inside... to try without Factory Pogo JIG...
Depend on your skills... maybe it is possible to connect wires without soldering...
I have only SM-R732 (SM-R720) knowledge...
I have to solder because it is so f. tiny...
https://forum.xda-developers.com/showpost.php?p=72097974&postcount=113
And I have damaged something during soldering...
But in main it is alive...
Maybe SM-R760 and SM-R770 are "easier" to handle... maybe you can connect wires through the Pogo contacts without soldering...
Or glue or "needle" or try to create something or your friends have an idea...
Look at the Pics...
I have tried to prepare some solderless ideas... but failed because it is toooooo tiny...
https://forum.xda-developers.com/showpost.php?p=72094300&postcount=111
SM-R732 and SM-R720 have contacts in 1 rope...
I'm missing Pictures of Gear S3 solutions...
Maybe users allready found solderless connection without Factory Pogo JIG...
Best Regards
Thanks. ??
Thanks but problem is that i don't know which wire connect to which pogo
adfree said:
You checked this Thread?
Service Manuals and USB Pinouts etc. inside:
https://forum.xda-developers.com/gear-s3/how-to/gear-s3-android-wear-port-wip-t3584588
Here is also USB Pinout inside... to try without Factory Pogo JIG...
Depend on your skills... maybe it is possible to connect wires without soldering...
I have only SM-R732 (SM-R720) knowledge...
I have to solder because it is so f. tiny...
https://forum.xda-developers.com/showpost.php?p=72097974&postcount=113
And I have damaged something during soldering...
But in main it is alive...
Maybe SM-R760 and SM-R770 are "easier" to handle... maybe you can connect wires through the Pogo contacts without soldering...
Or glue or "needle" or try to create something or your friends have an idea...
Look at the Pics...
I have tried to prepare some solderless ideas... but failed because it is toooooo tiny...
https://forum.xda-developers.com/showpost.php?p=72094300&postcount=111
SM-R732 and SM-R720 have contacts in 1 rope...
I'm missing Pictures of Gear S3 solutions...
Maybe users allready found solderless connection without Factory Pogo JIG...
Best Regards
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=71759486&postcount=30
Here are Service Manuals fro SM-R760 AND SM-R770:
https://forum.xda-developers.com/showpost.php?p=71759486&postcount=30
Here are the "confirmed" Pinout:
https://forum.xda-developers.com/showpost.php?p=71889112&postcount=73
Thanks to se47! I find the way with him.
If you need flash Gear S# from PC you should use:
POGO400 - VCC
POGO401 - none
POGO402 - Data-
POGO403 - Data+
POGO404 - Ground
Click to expand...
Click to collapse
I mean I could make little Picture for you... similar I've made for my SM-R732 (SM-R720)...
No idea if this would help you...
Best Regards
Edit 1.
Attached empty template... for USB Pinout.
Later if I have time I will paint little bit...
https://forum.xda-developers.com/showpost.php?p=72358616&postcount=199
I hope more users have success and can confirm Pinout...
Please also maybe post Photos...
Thanx in advance.
Best Regards
Help
Reading the post and looking.... its possible the pinout connecction?? someone can confirm it??
this is my situation:
(My Reply into other posts)
______________________________________________________
Someone Knows how can i connect the R765T to my PC for the download mode (Wired) because i cant enter into the Wireles Download Mode.
Where i can download the firmware for my device (In case it can restored).
Im New on this i recived the device as a gift and it was bricked.
Note: The Device Shows a Red Message and i cant enter only on a Download Mode (Wired?)
The message it shows:
Secure Block: Fail
Press Power Key to shutdown
______________________________________________________
Im new on this i hope you can help me
rulaszx98 said:
Reading the post and looking.... its possible the pinout connecction?? someone can confirm it??
this is my situation:
(My Reply into other posts)
______________________________________________________
Someone Knows how can i connect the R765T to my PC for the download mode (Wired) because i cant enter into the Wireles Download Mode.
Where i can download the firmware for my device (In case it can restored).
Im New on this i recived the device as a gift and it was bricked.
Note: The Device Shows a Red Message and i cant enter only on a Download Mode (Wired?)
The message it shows:
Secure Block: Fail
Press Power Key to shutdown
______________________________________________________
Im new on this i hope you can help me
Click to expand...
Click to collapse
This one worked for me
https://forum.xda-developers.com/showpost.php?p=72358616&postcount=199
samsung usb drivers for mobile phones
Odin 3.2
I know im late, but i hope it will be helpful for someone!
It is possible to connect without soldering.
Hello people,
I bought a used TrekStor Surftab theatre L15 TFMTKAW01232 and the MT8163 in the hope that I can repair it.
The problem with the device is that it is not possible to boot and after pressing the Volume + and On button for some time, I get into the boot menu. Here I have the choice of recovery, fastboot, norma bootl. No matter which selection I make, the tablet remains dark and nothing happens next.
I got myself a USB-A to USB-A cable and searched for the original Rom and found it. When trying to flash it with the SP_Flash_Tool I get the error "ERROR: S_BROM_CMD_JUMP_DA_FAIL".
What I notice is that the device seems to stay connected via USB only very briefly. I have already installed several drivers and in the tool it also shows me
the connected device "MediaTek USB Port_V1633 (COM4 on)".
Do you have any other idea how I could solve the problem?
Hi,
could you help me please?
I have here same model as you mentioned for repair.
A reverse polarity power source was attached to it, which resulted in a burned chip.
That chip I am unable to identify because it was destroyed.
I am attaching a photo of the mainboard where I've marked the position of that chip.
Would it be possible for you to have a look at your board and take a picture of the chip for me?
I would really appreciate it!
Thank you!