Can someone help?
I have a carcomm cradle with the convertor to connect it to the Tomtom navigator.
When I try to connect I cant find a port in the tomtom software that works. My XDA 2 doesnt seem to have a com 1.
Does anyone know how to connect them together as I cant find any info on the web.
Go to settings/connections/beams and uncheck the incoming beams box. You will now have com 1 available to use.
Hi all, I've problem to connect my GPS Bt receiver to the Pda.
I've an MDA pro and when I try to set port com on Bt settings only port 0 and 8 are available, but GPS software (1.50) in TT5.21 see only com7.
What I've I do to connect it?
Thank a lot..
Nobody?
Hmmm wasn't exactly buried in the search results
http://forum.xda-developers.com/viewtopic.php?t=28386&highlight=gps
Hi thanks a lot for the link but I try to change com port 7 in 8 by an hex editor but when I run TT5 the port number come back in 7 and don't find any GPS receiver.
I don't know to do more..
Resolved..thankx a lot...
TT5.21 goes!!!..This morning I'm using it but after half an hour the program hang up..
May be the batery level too low?
Hi all, nothing to do, TT5.21 sometimes hang up.
I'll try to use MDA PRO with external power.
Anyone has similar issues?
Bye..
Hi,
I'm hoping someone out there will be kind enough to help and solve this problem before I rip all my hair out!!!
I've installed tomtom (V5.00) on my mda pro, but I can't get it to recognise my bluetooth gps receiver.
I've set up a bluetooth partnership with an outgoing COM port. My MDA allows me to choose COM0 ,COM4,COM8
When I select other Bluetooth device from Tom Tom configuration, it gives me the options:
QCT Data Interface
Serial Cable on COM1
COM7
RIL on COM6
Infrared Port
Ir on COM3
I can't seem to align the software and the bluetooth to get it working correctly. Please help
Update your application to at least version 5,21 to get this working, have a look at http://www.tomtom.com/support/index.php?Language=1&FID=3361 for the software - Mike
Apart from the 5.21 and above (current is 6.03) software requirement, many users also have to set a COM port your MDA offers you (i.e. COM0) manually in the navigator.cfg (or was it .dat, don´t remember,try) file where the COM is stored that TT is using. Just change to navigator.txt, edit and change back to .cfg Good luck.
...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection
did you try another computer? or the power adapter that plugs into the wall?
yes, of course!
pr0naLd said:
did you try another computer? or the power adapter that plugs into the wall?
Click to expand...
Click to collapse
...it's a good question: too many times it's a joke...but not now.
i've tried in 3 computers...and the response is the same: NO connection, no "usb error"...nothing...only power charging....
If I put (with camera button and softreset) in bootloader mode it's ok...
"bip" on computer and USB un the bottom of the tuchscreen.
I've upgraded anothet time to NBD 7.4 but...
NO CONNECTION
This doesnt really belong in the wm6 forum i think. but maybe you also got a bad activesync on the computer, just start everything fresh again
...usb activesync now works!
after 7 (seven) downgrade and upgrade wm6 -> wm5 -> xda6 -> wm5 -> xda6r2 -> wm5 & so on....
ACTIVESYNC NOW WORKS!!!!
(obviously SAME computer, same Activesync 4.5, same USB port/cable)
i don't know why....but...
I'm HAPPY
thanks to all!
tommaso
TauRho said:
...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection
Click to expand...
Click to collapse
I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly
tphan2k3 said:
I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly
Click to expand...
Click to collapse
Yeah I use Cisco VPN for my work, and it screws up ActiveSync at times. Sometimes allows my phone to connect with no problem, and othertimes won't allow activesync to see my phone. Usually turning off the enhanced check box in the USB to PC connections settings will get around it, but not always.
USB port not working
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
-------------------------
I-Mate K-JAM
IPL : 2.16.0001
SPL : 2.16.0001
GSM : 02.07.10
OS : 2.16.9.1
-------------------------
try this....
loverbadi said:
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
Click to expand...
Click to collapse
i don't know if this one is a real solution...but...try this (no risk):
- first of all: try to change usb cable (with an old cable my kjam cannot connect....)
- try to plug usb cable SLOOOOOWLY: i've found that my kjam "communicates better" with my old pc il cable is "half-connected" (not tottally plugged in....
and...i don't know if it's possible to upgrade rom without usb connection....i'm sorry
(and sorry form my real poor english)
tommy
Similar problem
This may possibly not be the solution but I had a similar problem. I have an O2 xda mini s and after several days searching I discovered the problem. I opened up the xda and discovered that where the mini usb was soldered to the board, one of the solder points had come loose. The usb was not loose enough to stop the xda charging. By pressing down on the loose solder point the xda immediately showed up and syncing with my pc. I have now resoldered the usb back down and it works fine.
I hope that this is not the problem as it is damned fiddly soldering it back in place.
Hope this helps
I solved my problem
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.
loverbadi said:
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.
Click to expand...
Click to collapse
Have you been using some kind of holder for your wizard on your car?
I have seen several USB connectors with a bad attachment to the PCB because it has been used with car Holders that had the USB fixed.
Hi all.
I followed most of the activity around here for the past 5 monsths or so, and noticed several topics about the TD's internal FM radio for possible RDS/TMC usage. All without much luck.
Recently I bought a standalone TMC adapter (Navigon Trafficbox) with mini-USB connector. However I don't seem to get the thing to function at all. iGO 8 doesn't detect it, iGO 2006 and MioMap 3.2 detect it even without plugging it is (-_-) and Navigon Mobile 7 only goes for Bluetooth adapters.
Does anyone have any experience with standalone adapters on TD, know whether the USB port is mapped to a virtual COM port (and if so: which) or how to sniff the USB port to see whether the adapter is even transmitting data?
I do not believe diamond has a usb-host service to even let devices connect via that port.
I think only a bluetooth tmc reciever is usable.