Exactly what the subject says!
How the f*** do i transfer contacts form SIM to phone?
I dont need to know how its done the otherway round, but i am sure most others would also wanna know that too!.
Any exe or cabs pr plugins to do this?
I searched all the forum sections, even different devices
I tried the Sim Manager from a different thread but..
Doesnt seem to work on WM5 based SDA (i have an imate sp5m rom installed)
PLZZZZZZZZZ HELP!!!!!!!!!!
bump
Go to my web page http://www.shubaroo.com
Look for Sim Manager.
Øystein
Thanks Toflus
awesome..it installed perfectly on my phone..
havent tried it yet..
coz just yesterday i found a small application that did the job..
its nowhere as polished as sim manager..
but works just fine!
its attached!
I have both MDA and SDA. I just beamed mda sim manager to sda and it worked perfectly there.
transfer contacs to SIM
for those looking to transfer contacts to SIM (i.e. the other way around) you can use
Jeyo Mobile Companion
http://www.jeyo.com/downloads.asp
this was a lifesaver for me as i needed to use a spare phone while my sp5 is in repair.
good luck
Thanks
Thanks thiwskill
m2simcopy.zip works for me on sp5m
*** A little bit off topic ***
http://zyb.com - Will syncronize/back your Contacts/Calendar and even SMS to an online storage, best part it's completly free
They recently added support for PPC/Smartphones, but you'll need a third-party client addon: SyncML (http://www.synthesis.ch/dl_client.php?lang=e&lay=desk&bp=CPDA&pv=SMPWM#dlds_CPDA1) which isn't free. Zyb is in the works developing a SyncML of their own which will be free of charge (guess it's going to be locked on to zyb only)
I've used it with my Nokia phones and it works great .. Haven't got around to test it on my 8310/Tornado yet since I recently found out about the new supported hardware
Related
Anyone find this application yet?
It does exist
http://www.blackberry.com/uk/produc...owsmobile.shtml
Link isn't valid anymore. However I know the Blackberry website has shown connect software for quite some time. I have yet to see it for a Smartphone however I know some people got it up and running on thier Wizards.
I am hoping someone find the bb connect for this device, especially since HTC has a track record for releasing a client for their devices. I have not seen BB connect for any wm5 smartphone device yet. I don't think it exists.
I saw a screen shot on the RIM site...but cannot find the app for WM5 smartphone...have found it for WM5 pocket pc...but that will not install on smartphone.
Here is the original BB Connect cab file for WM 2003 on S. Africa provider, Vodacomm
It would only install on a Moto MPx220 device running WM 2003 and gave a uncertified device error when I tried it on any other device. Any programmers out there want to give it a shot and change the cab file so it does not require a particular device to install on? I never did get it to work on my Cingular provided MPx220, but perhaps there was an app lock issue I wasn't aware of. I've learned a lot in the last few years about WM issues. If anyone would like to take this Cab apart with an app like CabWiz and rebuild it, we could all try this out on a WM 5.0 device, and see if we could get it to work.
OK, I've put in a request to RIM
Let's see what I hear back on this. Anyone else have any update, please post here, or at least link to another forum if there is a client discovered, etc.
pdazealot said:
Let's see what I hear back on this. Anyone else have any update, please post here, or at least link to another forum if there is a client discovered, etc.
Click to expand...
Click to collapse
Any updates on this? Would love to see this device with blackberry connect...
I was told by RIM that it was coming out this month for the Excaliber
Well, I was holding my breath, but I heard it is now released on the Dopod version, the C720, in Asia. This is huge. It shouldn't be long before we can pull that app off the Dopod ROM and use on any Dash, S620, or other HTC Excaliber model! If anyone has any updates, or gets their hands on this Dopod ROM, please post it here.
pdazealot said:
Well, I was holding my breath, but I heard it is now released on the Dopod version, the C720, in Asia. This is huge. It shouldn't be long before we can pull that app off the Dopod ROM and use on any Dash, S620, or other HTC Excaliber model! If anyone has any updates, or gets their hands on this Dopod ROM, please post it here.
Click to expand...
Click to collapse
I was able to find this link:
http://www.dopodasia.com/resource/sea/bbc_web/index.html
Anyone have a Dopod Account? Click on Download now, I am trying to sign up now.
Damm it, I need a serial number any Dopod. Anyone have one?
Super excited now
I recently got a TMobile DASH and waiting for simunlock code from the carrier. I can unlock it now and put BBConnect and use it with Cingular....Super!!
Can't wait, please someone upload it....
Alright everyone, I finally got it. Enjoy!!! Please try and let me know if it works, I hope we don't need a special rom. If this works, I am running out and getting a dash
It works on stock T-Mobile DASH ROM....I didn't even do app unlock...All I did was Sim unlock for Cingular service.
pvenkat said:
It works on stock T-Mobile DASH ROM....I didn't even do app unlock...All I did was Sim unlock for Cingular service.
Click to expand...
Click to collapse
No luck on a Cinglar BlackJack. Once application unlocked it will not connect.
http://www.howardforums.com/showpost.php?p=8371688&postcount=22
alenzini said:
No luck on a Cinglar BlackJack. Once application unlocked it will not connect.
Click to expand...
Click to collapse
Got BBConnect installed on my imate smartflip successfully, but PIN is stuck at "Pending". Does anyone have any idea what I have to do now?
Please help!!!
Got it installed on my Blackjack with no problems but alas, I have the Pending pin. There is a BB Connect dekstop software out there that will generate a pin for a bis account but I cant seem to find it. I even tried my Treo 750 desktop dsoftware but it wont work. We need a dekstop Software to generate the pin.
The desktop software doesn't generate PIN. It isn't even connecting with my phone....so mad....
I got it working on my palm 750v without the desktop software btw....not sure what I did and loved it.
Uh, Senna 174, I saw you in the Blackberryforums as a new member asking for this Activesync Blackberry configuration tool. So yes it does generate it. Research your infor before posting information grasshoppa.
SP,
Perhaps you can show me how to get it done then.
I installed the software and connect the phone, then I got an unsuccessful connection error. I think the software is running (How do I verify it?) and it is connected to the desktop.
I wouldn't be asking questions if I had all the answers.
Works with Croatian BIS and BES services by both operators!!!
PIN generated, it's enough..
Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )
Vico100 said:
Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )
Click to expand...
Click to collapse
I could'nt get that working either.
The easiest way is to use SjPhone client. The interface is a bit dated but it works. Another option is Sling, but its sound quality is atrocious, although the interface is better.
Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )
Vico100 said:
Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )
Click to expand...
Click to collapse
No, mine is a Dopod U1000. Voip should be the same on all WM6 devices.
Sorry , it is Fring, not Sling. lol, what was I thinking?
http://www.fring.com/download/
to Vico100
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.
jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany.
. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab
Click to expand...
Click to collapse
Hi jason_shg
Is this .cab working for "WIFI" too, or just over GSM?
Tschii
jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.
Click to expand...
Click to collapse
I had tried this before but it never worked for me. I think it may work for extremely limited ISP.
Are you able to make call with it and have good voice quality at both ends?
I have tested it on WIFI, it can work on my x7510. Afer installation, there is a new program named sip config tool in your programs, there you should input SIP informations, such as SIP server user name password, next step you can find a new window at the telephone setting named internet, here you can choose when to use VOIP. But I do think, the voice quality of the VOIP can not make me satisfied.
if you install Skype for PPE, it automatically does VOIP, either WiFi or 3G
I now use AGEphone mobile, which has good skin, user interface, and voice quality.
works great
http://forum.xda-developers.com/showthread.php?t=596682 . d
Hi everybody,
right now I have the HTC Wizard, but I plan to get the HTC Touch Pro as soon as it is out . Beeing a collector, I would hate to loose all my SMS (I probably never will touch my wizard again (sounds somhow dirty)after I have the Pro. Is there a way to save the SMS to the PC (probably in Outlook?) and than transfer them to the new phone?
Somhow connected: My new plan will have included SMS. Now I would like to write them on the PC (preferential with outlook 2003/2007) and than send them via the attached phone.
I think there could be one programm which could do it all, because the problems are related . Anybody an idea?
EDIT: Ok, I found some programs , http://www.dotfred.net/ (PIMBackup) seems good to transfer from one Phone to the other, and it is freeware.
And http://www.jeyo.com/extender.asp (Jeyo Mobile Extender ) seems to do the job, for all questions, but you have to buy it, does anybody know a freeware alternative?
there is a freeware named "MobileAssis" just like "Jeyo Mobile Extender", and better
homepage here: http://www.mycnknow.com/smarthelper.html
btw: make sure when the data restoring, your phone on "fly mode"
my english is not very well, hope can help
Thanx, I checked the page . Unfortunatly my asian (I guess it is mandarin??) is not existent . Does it really integrate in Outlook? And is there a English Version? Thanx a lot.
I have an X05HT and i am in love with it.. the only thing is i don't read japanese.... I purchased SelMUI version 2.2 (Kinda like CE-Star which changes UI from Japanese to english... made by Mobem....) and it worked. My problem is when i installed that software i am no longer able to access my Softbank SMS or S!Mail and folders... i can recieve emails but i can't respond....
The only thing i can do is switch back to Japanse but when i do that the program soft resets the phone..... EVERY TIME (VERY ANNOYING)
also i noticed that when it rebooted after soft reset an error messge popped up "An error occuried with cprog.exe" Is there anything i can do to get this running properly?
all your assistance is greatly appreciated
very respectfully,
GregTHEnewGUY
There is a free app on this forum called diamond tf3d config. This app will let you change TF3D into English; however prompts and most things will remain in Japanese.
Your best bet is to install hardspl, flash a wwe rom and set up your hsdpa and smail that way. I am using Dutty's 3.6b with flinx's JPIMEWM6 cab for japanese display; I have successfully set up MMS (SMAIL) using the arcsoft app that comes with dutty's rom. You are on an x05ht, so I don't know if duttys will work, you may need to read the raphael section for more info.
solved
Kevbodian said:
There is a free app on this forum called diamond tf3d config. This app will let you change TF3D into English; however prompts and most things will remain in Japanese.
Your best bet is to install hardspl, flash a wwe rom and set up your hsdpa and smail that way. I am using Dutty's 3.6b with flinx's JPIMEWM6 cab for japanese display; I have successfully set up MMS (SMAIL) using the arcsoft app that comes with dutty's rom. You are on an x05ht, so I don't know if duttys will work, you may need to read the raphael section for more info.
Click to expand...
Click to collapse
thanks this program was awsome.....!!! you just saved my life.... the settings are still in japanese but i ok with that... i really don't need to go into them... THANKS for your help again
Using Softbank 3G connection (Phone)
USING SOFTBANK AND WANNA ENABLE MY SONY ERICSSON GPRS *C902*
I am using using softbank telecome, and you know in japan this is the rule if you wana buy a sim card , you gotta buy a entire sets, any way.. i have done that... the cell phone that i used in my country i wanna use that cell phone using softbank sim card, oh yeah my cellphone is Sony Ericsson C902
it has the 3G network, i can send SMS and I can receive Calls and can make calls, but only the problem is i cannot use the internet, to send email using MMS, or softbank email address as it is given [email protected]
so my question is How can I Enable GPRS on my Sony Ericsson C902.
DAME! WHEN I WENT TO ASK THE SOFTBANK SERVICE THEY DID NOT TELL ME, SO IT IS KIND OF THEIR SECRATE TO DO BETTER BUSINESS... AHMM WHO CARES...
ANY WAY PLEASE IF THERE ANY ONE OF YOU MAY HELP ME WITH THAT.... ?
Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)
i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?
well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?
Did you contact Avaya support for assistance?
I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed
is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .
yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.
thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away
When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.
I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.
support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login
I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?
I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.
it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no
Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?
sry... I was offline for a while... Does somesone find the solution?
No i gave up in the end..... bloody crap