Database Info

How to transfer contacts from SIM to phone on SDA/sp5m/8300?

Exactly what the subject says!
How the f*** do i transfer contacts form SIM to phone?
I dont need to know how its done the otherway round, but i am sure most others would also wanna know that too!.
Any exe or cabs pr plugins to do this?
I searched all the forum sections, even different devices
I tried the Sim Manager from a different thread but..
Doesnt seem to work on WM5 based SDA (i have an imate sp5m rom installed)
PLZZZZZZZZZ HELP!!!!!!!!!!

bump

Go to my web page http://www.shubaroo.com
Look for Sim Manager.
Øystein

Thanks Toflus
awesome..it installed perfectly on my phone..
havent tried it yet..
coz just yesterday i found a small application that did the job..
its nowhere as polished as sim manager..
but works just fine!
its attached!

I have both MDA and SDA. I just beamed mda sim manager to sda and it worked perfectly there.

transfer contacs to SIM
for those looking to transfer contacts to SIM (i.e. the other way around) you can use
Jeyo Mobile Companion
http://www.jeyo.com/downloads.asp
this was a lifesaver for me as i needed to use a spare phone while my sp5 is in repair.
good luck

Thanks
Thanks thiwskill
m2simcopy.zip works for me on sp5m

*** A little bit off topic ***
http://zyb.com - Will syncronize/back your Contacts/Calendar and even SMS to an online storage, best part it's completly free
They recently added support for PPC/Smartphones, but you'll need a third-party client addon: SyncML (http://www.synthesis.ch/dl_client.php?lang=e&lay=desk&bp=CPDA&pv=SMPWM#dlds_CPDA1) which isn't free. Zyb is in the works developing a SyncML of their own which will be free of charge (guess it's going to be locked on to zyb only)
I've used it with my Nokia phones and it works great .. Haven't got around to test it on my 8310/Tornado yet since I recently found out about the new supported hardware

Reinstall Pocket MSN on Treo 750v?

As you all know, the Treo 750v does not come with Pocket MSN, but it is sometime nice to be able to chat on MSN Messenger while on the road. Does anyone know how one goes about reinstalling Pocket MSN onto a device? I have other WM5 devices (Tytn), is it possible to extract the program into a cab to install?

It should be. It can most likely be extracted from the 750 Cingular rom update and cab'd up.

man, better use agile messenger for wm5 - last beta is free and it is so much better than the old msn messenger:
- use smileys
- send camera pictures directly
- keep history of chats (just like on pc)
- use not only msn but also icq, aol, yahoo, google im
here's the download: http://updates.am-im.net/AgileMessengerWMPPC.zip - it's the cab file in the zip, so copy it over to your device and run it there. hint: make the cab file write protected on your desktop (right click on the cab), then copy it over to your mobile's storage card and install it. it won't be deleted then and you can always reinstall it when you need it again.
cheers, lutz

Just install this... ;-)

lutzh said:
man, better use agile messenger for wm5 - last beta is free and it is so much better than the old msn messenger:
- use smileys
- send camera pictures directly
- keep history of chats (just like on pc)
- use not only msn but also icq, aol, yahoo, google im
here's the download: http://updates.am-im.net/AgileMessengerWMPPC.zip - it's the cab file in the zip, so copy it over to your device and run it there. hint: make the cab file write protected on your desktop (right click on the cab), then copy it over to your mobile's storage card and install it. it won't be deleted then and you can always reinstall it when you need it again.
cheers, lutz
Click to expand...
Click to collapse
Does that use WIFI or sms to send messages?

it uses wife to connect, if wifi is available and enabled. sms is never used to send messages, if there is no wifi it uses gprs/3g connection.
i would not use the windows live client - it's a big monster...
cheers, lutz

Hi,
I installed the WindowsLive.PPC2005_ARM.CAB. BUt when I lunch MSN, I can not find where I can put my user name and password.
Thanks for U help.
Saadi

Excellent, thats just what I'm looking for. Seems like I'd have to pay for it though, not a good sign. Is there anyway I can get this program for free?

Upgrade to Cigular ROM
xdame said:
Excellent, thats just what I'm looking for. Seems like I'd have to pay for it though, not a good sign. Is there anyway I can get this program for free?
Click to expand...
Click to collapse
As said in the title upgrade to the cingular rom it contains MSN for free.

gpsenzo68 said:
As said in the title upgrade to the cingular rom it contains MSN for free.
Click to expand...
Click to collapse
Sorry, I wasn't clear on what I said.
I already have Pocket MSN on my MDA, but I'd like to use Agile messenger since it can be used over WIFI too. My question is, is there a way to get Agile for free? I know its a long shot.
One more thing, can Agile be used over GPRS?

Agile for you
Here you go. And yes it can be used with GPRS

mkoster007 said:
Just install this... ;-)
Click to expand...
Click to collapse
Anyone got this working on the today screen , The name search function seems to conflict

gpsenzo68 said:
Here you go. And yes it can be used with GPRS
Click to expand...
Click to collapse
I tried that file, seems like it needs WIFI. How did you get it to work with GPRS?

Works on GPRS
I just installed it on my Treo and it works with GPRS even with my MDA pro it uses the available source GPRS.

gpsenzo68 said:
I just installed it on my Treo and it works with GPRS even with my MDA pro it uses the available source GPRS.
Click to expand...
Click to collapse
I get an error message when trying with GPRS saying:
All connections failed, switch to contactlist?
I'm not sure why this is. sucks

Agile on Treo
Maybe it works on a Treo 750 but not on your PPC?
Or do you also have a Treo?
Check the site; http://www.agilemobile.com/agile_messenger.html
To me it sounds like e settingproblem because it even works on my SPV550, my Qtek S100 and on a Qtek 2020 without any problems
Good luck!

gpsenzo68 said:
Maybe it works on a Treo 750 but not on your PPC?
Or do you also have a Treo?
Check the site; http://www.agilemobile.com/agile_messenger.html
To me it sounds like e settingproblem because it even works on my SPV550, my Qtek S100 and on a Qtek 2020 without any problems
Good luck!
Click to expand...
Click to collapse
I don't have a Treo, but a PPC (MDA). I haven't managed to get it to work with GPRS(EDGE), but thanks for your help anyway.
EDIT: I have managed to get it to work on GPRS SOMEHOW. I haven't done anything and it just started working. This is great, I can be on MSN/Yahoo/Google messengers from anywhere! Thanks!

thanks of rthe post of the file, even though its a beta version, I think is really good. I have the SPV M3100. It works really well. When it comes of beta will they make us pay for full version?
Many thanks again!

Agile
YEP they let you pay! :-(

gpsenzo68 said:
YEP they let you pay! :-(
Click to expand...
Click to collapse
I wanted to contact you about that Blackberry I mentioned in November, but you didn't answer. Thank you anyway. Tuly

Help!! Reading / writing chinese for my O2 Zinc

guys,
i need to read/write chinese with my o2 zinc...what should i do?? i'm using WM6 - WWE_RM3070712 ROM...thanks

Hey, here is the URL that provide the Chinese input application. I havnt tried these before because i'm using another 1. I will oso attach for you. So far i use the Chinese.Support.Song.cab is quite gd but their is a bug which not allow you to log in to the window live messenger that originally come wif your wm6. However i will try to install another version of the messenger to test whether it's works or not. By the way, juz to inform u tat once you install the chinese viewer, you will c only white screen when u read ur sms. But it's will fix when u restart your PPC or reset your PPC. Juz try it.
Application for wm6( all in chinese version)

Here is the one i using. Hope can help you because i oso search for them for the whole nite and tried each of them. So far i found that it's the best software that u may get from the net. There's also a software named CE-Star but i heard that it will make your PPC lagging. So i nvr tried since a lot of chinese user hav these opinion.

The above post is the input software, I think you should install tis chinese viewer b4 you install the input application. Hope you will like it..
Chinese viewer software

Voip on Advantage x7510

Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )

Vico100 said:
Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )
Click to expand...
Click to collapse
I could'nt get that working either.
The easiest way is to use SjPhone client. The interface is a bit dated but it works. Another option is Sling, but its sound quality is atrocious, although the interface is better.

Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )

Vico100 said:
Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )
Click to expand...
Click to collapse
No, mine is a Dopod U1000. Voip should be the same on all WM6 devices.
Sorry , it is Fring, not Sling. lol, what was I thinking?
http://www.fring.com/download/

to Vico100
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.

jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany.
. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab
Click to expand...
Click to collapse
Hi jason_shg
Is this .cab working for "WIFI" too, or just over GSM?
Tschii

jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.
Click to expand...
Click to collapse
I had tried this before but it never worked for me. I think it may work for extremely limited ISP.
Are you able to make call with it and have good voice quality at both ends?

I have tested it on WIFI, it can work on my x7510. Afer installation, there is a new program named sip config tool in your programs, there you should input SIP informations, such as SIP server user name password, next step you can find a new window at the telephone setting named internet, here you can choose when to use VOIP. But I do think, the voice quality of the VOIP can not make me satisfied.

if you install Skype for PPE, it automatically does VOIP, either WiFi or 3G

I now use AGEphone mobile, which has good skin, user interface, and voice quality.

works great
http://forum.xda-developers.com/showthread.php?t=596682 . d

WM6.5 and Avaya as dialler

Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)

i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?

well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?

Did you contact Avaya support for assistance?

I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed

is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .

yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.

thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away

When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.

I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.

support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login

I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?

I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.

it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no

Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?

sry... I was offline for a while... Does somesone find the solution?

No i gave up in the end..... bloody crap