I have tried numerous times to load the i-mate_SP5_WWE_2.5.331.2.exe
rom. But I still haven't been succesful.
Any help is greatly appreciated!
Here are my specs:
On the System Information screen:
- ROM Version 1.0.4.0
- Operator Version 1.5.331.4
On the About screen:
- OS 5.1.7.0 (Build 14402.1.1.0)
- Radio Version 4.0.13.25_01.14.00
- RIL Version 2.002
- ROM Update Version: <empty>
- Operator: 5.1.70.14402
- Manfucterer: 5.1.70.14402
- Microsoft: 5.1.70.14402
- Language: 5.1.70.14402
- File System: 5.1.70.14402
Bootloader version: IPL 2.00 SPL 2.00.0008
The i-mate_SP5_WWE_2.5.331.2.exe installs succesfully according to the installer, but when it reaches 100% the device reboots, then boots up starts the cold boot config, reboots and I have a new clean OS, but with the old versions (see above).
Does anyone have any clue how to properly upgrade my rom?
I tried several things:
- Upgrade from the bootloader (power on while holding camera button)
- Pull out the battery when the installation is done
All with the same results.
Thanks,
Dennis
Try to change your CID to SuperCID
See here how to do that: http://www.modaco.com/index.php?showtopic=240179&hl=supercid
Related
I have an hp h6315. It worked great. One morning, I woke up and saw it turned off. When i turned it on again:
imei: N/A !!!
backlight can not be bright ?!
can not do soft reset or hard reset. The only way to turn it off is take off the battery ??
can not be realized by the computer through usb (can do activesync) so i can't upgrate or fix it's rom
the main function of pda is ok but phone is no way (of course because of no imei?)
unrecognized battery, but: remove battery and use the ac - no improve, same problems, use one new battery: same message, same problem
but i can play game (with dark light), can do other simple things like word, excel ... with it
So, what happens to my pda? Can it be fixed ? Help me please!
The item: hp h6315
Rom Revision : 1.00.01 ENG
Rom Date : 09/17/04
OS Version : 4.20.0.3
Bootstrap Version : 1.0.0
Bootloader Version : 1.00.01 ENG
GSM
Radio Present : Yes
Firmware Version : 541b09gg.P5186B 1365240 062204 15:17
Hardware Revision : W1.8
Driver Version : 1.0.0
Software Version : 0.0.1.2
IMEI Number : N/A
Hi
I have downloaded several radio rom from wiki and when I run the .exe file it shows my version is 1.2.0 image and it will upgrade to v2.47.21 etc. but when I go to my pda to check the rom version it's not 1.2.0, it's
Radio rom V02.19.21.
Protocol version 4.1.13.09
Ex Rom 2.15.13.121
Why does the program not show the correct rom version, will it damage my pda as I try to upgrade the rom when I had version
IPL 1.00
SPL 1.00.0000
GSM 01.13.20
OS 1.0.13.21
It's stop the battery from charging.
Also since the upgrade from 1 to v2 I get a blank screen when I reply to SMS, couldn't find my phone provider with auto config as the Dopod is from Singapore and I am using it in Hong Kong.
Thanks
The installer used for flashing the radio rom is "hacked". that's why it displays incorrect info. Just proceed witht he install and you should be fine.
I can't help you with your sms issues...
hi, i have a g3 prophet with ipl ver. 1.00 and spl ver. 1.00.0000
i've just upgraded to pdaviet 4.0.0.4 PV and everything works flawlessly. however, due to wifi connections dropping i upgraded my phone's radio firmware from 1.13 to 2.19, the known version without bug with the pdaviet firmware.
installation is flawless but now my prophet can not boot , i just shows the dopod screen and resets continuosly. please help
i tried reupgrading with the newer radio version, but the installer said that it can not install, eventhough i have put my prophet in the three colour screen (bootloader) help me
You tried to restore old radio to phone , if not .
TOLD me ! i help u !
i dont have the old radio installer, it is 1.13 and can't find it anywhere.
also, i tried to upgrade to newer radioand reinstall rom, but the installer can not recognize my dopod, altough i have put it in the bootloader screen and connect it via usb.
it says error [300], invalid update tool. i have tried the 2.69 radio, 2.19 radio, and even the AKU 2.2 installer, and all of them return the same message.
please help
Hello everyone,
i'm trying to update my universal(T-mobile MDA Pro version) to WM6. I've tried every guide I found here, read the whole wiki and googled hours and hours for error 222. No solution...
I'm stuck at the first step when I'm installing Button 1.05 ROM. Every time I run it I get error 222 (Device is not responding).
The phone was already SIM unlocked when I got it and bootloader ver. says 1.01. SIM and memory cards are not in the phone.
I've provided more info below. Also tried with few difrent cables on difrent computers... Always error 222.
I would very much appreciate every help you can provide...
Thx
------------------------------------------
Some info from WST
Wizard Service Tool v4.2.2
05/09/08 15:58:23
CPU Manuf. FAILED
IMEI:
=> Bootloaders:
IPL: (G3 device)
SPL date unknown
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 0.0
Registry AKU: .2.0.0
Radio values FAILED
=>Extended_ROM:
Version: UNLOCKED
Name: Extended_ROM
Status: visible
=> Drives and partitions:
|--Handle--|---Size---|
33ef0c1a - 1.89G (0x79120e00)
d3d6540a - 9.99M (0x9fd800)
33e2010e - 44.43M (0x2c6dc00)
f3e71212 - 56.75M (0x38c0000)
13e71026 - 3.19M (0x330000)
f3e71002 - 3.06M (0x30fc00)
=> DOC chip unique ID:
0000000084180102153903ee0e0605d0
Key Index: 26
All Done.
------------------------------------------------
Info from Device Information:
ROM version: 1.30.115 WWE
ROM date: 4.17.06
Radio version:1.10.03
Protocol version 42.44.P8
ExtROM version: UNLOCKED
-----------------------------------------------
No ideas?
I have yet another question. Since this is a T-mobile, after a hard reset it installs a bunch of custom programs. Is there a way to stop it from doing this? Clear out ext rom?
EDIT : Don't bother. Maneged to solve it.
d3v123 said:
No ideas?
I have yet another question. Since this is a T-mobile, after a hard reset it installs a bunch of custom programs. Is there a way to stop it from doing this? Clear out ext rom?
EDIT : Don't bother. Maneged to solve it.
Click to expand...
Click to collapse
Use an extended rom unlocker first and then hard reset. After that you will have access to the extended rom. Delete whatever and agian hard reset...
For your first problem try to unlock your phone completely.
thx 4 second...
As for first, that's what I'm trying... I can't CID unlock it with WST (it says that my DOC chip is locked). In various wiki guides i'm suppoused to flash the button 1.05 rom first, but i can't do it because of error 222.
I've found this link with some tools to unlock the device. Which tool should I use to CID unlock it?
In topic about tomal's new memory card flashing there was a suggestion to CID unlock with this. I thought it was only for SIM unlocking. Can I use it to CID unlock as well?
Hi, being an almost total novice i need a little help!
I seem to have hit a brick wall while attemping to de-brand my UK Vodaphone branded HTC Legend!
I just tried with two with different goldcards and three different ROM files (thats six seperate attempts)
each time it failed the same way: ERROR [140]: BOOTLOADER VERSION ERROR
If anyone can offer any advice I would be very gratefull - I really need to get rid of all the Vodaphone bloatware that doesnt even work properly.
BTW - I made a new Goldcard each time but can a goldcard be used more than once?
I created a goldcard using a 2gb MicroSD card made by Kingston and i followed the process at:
How To: Create a Goldcard | TheUnlockr
I downloaded file:
RUU_Legend_HTC_WWE_2.03.405.3_Radio_47.39.35.09_7. 08.35.21_release_130330_signed.exe from Index of /shipped/Legend/
I turned my phone on with the goldcard inserted and connected my phone to my PC with the USB cable and ran the RUU - Result =
ERROR [140]: BOOTLOADER VERSION ERROR
Here are all the numbers from my HTC Legend
Information from: Menu -> Settings -? About Phone -> Software Information
Firmware Version: 2.1 update 1
Baseband Version: 47.39.35.09u_7.08.35.21
Kernel Version: 2.6.29-5f084974 [email protected]#1
Build Number: 2.05.161.1 CL191838 release-keys
Software Number: 2.05.161.1
Browser version: Webkit 3.1
When I start the device by pressing vol down + power button I get the information below:
LEGEND UNKNOWN SHIP S-ON
HBOOT-0.43.0001
MICROP-0816
TOUCH PANEL-SYN07_0105
RADIO-7.08.35.21
Feb 18 2010,16:29:10
Any suggestions would be greatly appreciated.
So far I have tried to load the following RUU files - they all failed with the same error!
RUU_Legend_HTC_WWE_1.23.405.1_Radio_47.26.35.04_7. 05.35.26L_release_120393_signed.exe
RUU_Legend_HTC_WWE_1.31.405.4_R_Radio_47.26.35.04_ 7.05.35.26L_release_123853_signed.exe
RUU_Legend_HTC_WWE_1.31.405.5_R_Radio_47.26.35.04_ 7.05.35.26L_release_126592_signed.exe
RUU_Legend_HTC_WWE_2.03.405.3_Radio_47.39.35.09_7. 08.35.21_release_130330_signed.exe
:-((
I guess I am missing something, can anyone point me in the right direction?